25) This is the property of muscle that gives it the ability to stretch without damage. a) electrical excitability b) contractility c) extensibility d) elasticity e) thermogenicity

An airplane flying across the sky experience drag force determined by the factors including the speed of flight, coefficient of skin friction and the reference surface area

The boundary layer thickness is approximately 0.233 cm

The total skin friction drag, is approximately 265 N

Reason:

First part:

Given parameters are;

Chord length, L = 3 m

Velocity of the plane, V = 200 m/s

Density of the air, ρ = 1.225 kg/m³

Viscosity of the air, μ = 1.81 × 10⁻⁵ kg/(m·s)

The Reynolds number is given as follows;

\(R_{eL} = \dfrac{\rho \times V \times L}{\mu}\)

Therefore;

\(R_{eL} = \dfrac{1.255 \times 200 \times 3}{1.81 \times 10^{-5}} = 4.16022099448 \times 10^7 \approx 4.16 \times 10^7\)

Boundary layer thickness, \(\delta_L\), for laminar flow, is given as follows;

\(\dfrac{ \delta_L }{L}=\dfrac{5.0}{\sqrt{R_{eL} } }\)

\({ \delta_L }=\dfrac{5.0 \times L}{\sqrt{R_{eL} } }\)

Which gives;

\({ \delta_L }=\dfrac{5.0 \times 3}{\sqrt{4.16 \times 10^{7}} } \approx 2.33 \times 10^{-3 }\)

The boundary layer thickness, \(\delta_L\) ≈ 2.33 × 10⁻³ m = 0.233 cm

Second Part

The total skin friction is given as follows;

\(Dynamic \ pressure, q = \dfrac{1}{2} \cdot \rho \cdot V^2\)

Therefore;

\(q = \dfrac{1}{2} \times 1.225 \times 200^2 = 24,500\)

The dynamic pressure, q = 24,500 N/m²

Skin friction drag coefficient, \(C_D\), is given as follows;

\(C_D = \dfrac{1.328}{\sqrt{R_{eL} } }\)

Therefore;

\(C_D = \dfrac{1.328}{\sqrt{4.16 \times 10^7 } } \approx 2.06 \times 10^{-4}\)

Skin friction drag, \(D_f\), is given as follows;

\(D_f\) = q × \(C_D\) × A

Where;

A = The reference area

∴ \(D_f\) = 24,500 N/m² × 2.06 × 10⁻⁴ × 3 m × 17.5 m = 264.9675 N ≈ 265 N

The total skin friction drag, \(D_f\) ≈ 265 N

Learn more here:

https://brainly.com/question/12977939

Answer:

polymerisation,

Explanation:

Answer:

(i) IR = 100.167 A Iy = 75.125∠-120 IB = 50.083 ∠+120 (ii) IN =43.374∠ -30°

Explanation:

Solution

Given that:

Three loads  24 kW, 18 kW, and 12 kW are connected between the neutral.

Voltage = 415V

Now,

(1)The current in each line conductor

Thus,

The Voltage Vpn = vL√3

Gives us, 415/√3 = 239.6 V

Then,

IR = 24 K/ Vpn ∠0°

24K/239.6 ∠0°= 100.167 A

For Iy

Iy = 18k/239. 6

= 75.125A

Thus,

Iy = 75.125∠-120 this is as a result of the 3- 0 system

Now,

IB = 12K /239.6

= 50.083 A

Thus,

IB is =50.083 ∠+120

(ii) We find the current in the neutral conductor

which is,

IN =Iy +IB +IR

= 75.125∠-120 + 50.083∠+120 +100.167

This will give us the following summation below:

-37.563 - j65.06 - 25.0415 +j 43.373 + 100.167

Thus,

IN = 37.563- j 21.687

Therefore,

IN =43.374∠ -30°

The maximum data rate supported by the line is 100 Mbps. b) It seems that the question got cut off.

a) To determine the maximum data rate supported by the line, we can use the Nyquist formula for channel capacity:

C = 2 * B * log2(1 + SNR) Where:

C is the channel capacity (maximum data rate)

B is the bandwidth

SNR is the signal-to-noise ratio

Given:

SNR = 2000

Bandwidth B = 5000 KHz = 5 MHz

Plugging the values into the formula:

C = 2 * 5 * 10^6 * log2(1 + 2000)

C = 2 * 5 * 10^6 * log2(2001)

Using logarithmic properties, we can simplify further:

C = 2 * 5 * 10^6 * log2(2^10)

C = 2 * 5 * 10^6 * 10

C = 100 * 10^6

C = 100 Mbps

Learn more about data rate here:

https://brainly.com/question/3521381

#SPJ11

If we tried to further accelerate a Supersonic fluid with a diverging diffuser,  the pressure will decrease due to an increase in area. This can be described as :

dA/A = dP/ρV² (1-M²) for supersonic flow Mach Number, M: M > 11 - M² < 0 (dA/A) = -K (dP/ρV²)k = 1-M²

Supersonic flow fields have Mach numbers greater than one at every location. Supersonic flows are usually characterized by the presence of shock waves, which cause abrupt changes in flow characteristics and streamlines (in contrast to the smooth, continuous variations in subsonic flows).

Supersonic and subsonic relate to speeds that are faster or slower than the speed of sound, respectively. Supersonic means traveling faster than the speed of sound, which is 343.2 m/s (1,126 ft/s). Subsonic speeds are defined as anything moving slower than the speed of sound.

Learn more about supersonic:
https://brainly.com/question/8821985
#SPJ1

Answer:

What you should do changes based on the hazards you're exposed to.

You should be aware of any hazards that are present.

Answer:

49 is equal to 7 times 7

Explanation:

A "perfect square" is a number that is the product of a whole number that is multiplied by itself.

In the example above, 49 is a perfect square because it is the product of the square of 7. If you multiply 7 by itself, the product is 49.

Other examples of perfect squares are:

25 = 25 is equal to 5 x 5

100 = 100 is equal to 10 x 10

81 = 81 is equal to 9 x 9

16 = 16 is equal to 4 x 4

64 = 64 is equal to 8 x 8

Answer:

D

Explanation:

The first step when using object-oriented design is to identify the objects or concepts that are relevant to the problem being solved.

This involves analyzing the problem domain and breaking it down into smaller components or objects that can be modeled using classes in the programming language.

In conclusion, the first step in object-oriented design is to identify and define the relevant objects or concepts that will be used to solve the problem. This involves careful analysis and consideration of the problem domain, and lays the foundation for the entire design process.

To know more about object-oriented design visit:

https://brainly.com/question/28731103

#SPJ11

The mass of garlic odor production of a 13mg per day.

The mass concentration of garlic odor in the kitchen 20 minutes after the chef begins is 13mg/m³.

The mass rate = steady-state concentration x air change rate x volume / decay rate

First, we need to convert the units of the steady-state concentration from μg/m3 to mg/m3 by dividing by 1000:

= 150 / 1000

= 0.15mg/m³

Mass rate = 0.15 × 2.0 × 125(0.24 per day)

= 13 mg pee day

Learn more about mass on

https://brainly.com/question/86444

#SPJ1

Answer:

with what

Explanation:

The answer response are:

1. In a steel beam, the designation w21x68 refers to its size and shape. The "W" stands for wide flange and the number "21" indicates the depth of the beam in inches. The weight per foot of the beam is approximately 68 pounds.

2. Shear connections are designed to resist shear forces in a beam, while moment connections are designed to resist bending moments. Shear connections typically have bolts or welds connecting the beam to the supporting column, while moment connections have additional plates and bolts to provide extra strength against bending moments.

3. Composite construction is a type of building construction that combines two materials, usually steel and concrete, to create a more efficient and cost-effective structure. The advantages of composite construction include increased strength and stiffness, improved fire resistance, and reduced construction time and costs.

4. Steel structures have the advantage of being strong and durable, but they can also be vulnerable to fire due to their high melting point. To overcome this disadvantage, steel structures can be coated with fire-resistant materials or designed with additional fire protection measures, such as sprinkler systems or fire-resistant insulation. An example of a steel structure that has been designed for fire resistance is the World Trade Center in New York City.

5. An open web steel joist is a type of steel beam that has a web consisting of a series of smaller steel bars or rods. The lightweight steel decking is attached to the joist using special clips or fasteners that are designed to hold the decking securely in place.

A steel beam is a structural element made of steel that is used to support heavy loads in construction and engineering projects. Steel beams come in a variety of shapes and sizes, including I-beams, H-beams, and wide flange beams.

Therefore, They are designed to resist bending and shearing forces, and are often used to span long distances or support the weight of other structural components, such as floors, roofs, and walls. Steel beams are popular in construction due to their strength, durability, and versatility, and can be found in a wide range of buildings, from skyscrapers to residential homes.

Learn more about steel beam on:

https://brainly.com/question/29575677

#SPJ1

Answer:

First, we need to calculate the volume of concrete needed to line the canal. The volume of a cylinder is given by the formula:V = πr^2hWhere V is the volume, r is the radius of the cylinder, and h is the height (length) of the cylinder.Since we are lining a canal, the cross-sectional shape of the canal is a rectangle, not a circle. However, we can still use the formula for the volume of a cylinder by treating the width of the canal as the radius and the height of the canal as the length.In this case, the width of the canal is w and the height is h, so the volume of the concrete needed to line the canal is:V = πw^2hWe are given that the length of the canal is 227 ft, so h = 227 ft. We are not given the width of the canal, so we cannot use the formula to calculate the volume of concrete needed.Next, we need to calculate the volume of concrete needed with the 12% allowance for waste and overexcavation. The volume of concrete needed with the allowance is the original volume plus 12% of the original volume.The volume of concrete needed with the allowance can be calculated using the following formula:V' = V + (V * 12%)Where V' is the volume of concrete needed with the allowance and V is the original volume.Since we do not know the original volume, we cannot use this formula to calculate the volume of concrete needed.To solve this problem, we need to know the width of the canal in order to calculate the volume of concrete needed. Without this information, it is not possible to determine the volume of concrete that must be delivered.

Explanation:

The basic requirement of measurements is to have a standard or reference point against which to compare the quantity being measured. This standard or reference point should be well-defined and stable, and the measurement process should be repeatable and consistent. Additionally, it is important to ensure that the measurement equipment is calibrated and in good working condition.

Answer:

The most basic requirement for measurements is the presence of a standard or reference point against which the quantity being measured can be compared. The measurement process should be repeatable and consistent, and the standard or reference point should be well-defined and stable. Furthermore, ensure that the measurement equipment is calibrated and in good working order.

Explanation:

Answer:

C . . . . . . . . . . . . . . . . . . . . . .

(a) The column height of mercury in a mercury barometer is 7.32 meters, or 24.0 feet, or 95.2 inches.

(b) The column height of water in a water barometer is 995 meters, or 3268 feet, or 33.9 feet.

(c) A water barometer is not very practical because it would need to be very tall to measure atmospheric pressure.

(d) Ignoring the practicality issue, a mercury barometer would be more precise because mercury is denser than water.

Mercury barometer: 7.32 m, 24 ft, 95.2 in

Water barometer: 995 m, 3268 ft, 33.9 ft

Water barometer not practical because it would be too tall

Mercury barometer more precise because mercury is denser

Read more about barometer here:

https://brainly.com/question/11904913

#SPJ2

In C++, casting refers to the process of converting the data type of an object into another type. The type of casting mechanism that should be used if you want to cast an integer value to a double value is `static_cast`.

What is casting in C++?Casting refers to the conversion of one data type to another in C++. The most common casting operators are the following:Static castReinterpret castDynamic castConst castAnswer:When the user wants to convert an integer to a double, the static_cast type casting operator should be used. The static_cast method is a safer form of casting as it performs compile-time checks to make sure that the conversion is valid. The static_cast type casting operator can be used with all scalar types, as well as with pointer types, to perform the following operations:

Upcasting - Converting a derived class pointer to a base class pointer. Downcasting - Converting a base class pointer to a derived class pointer. Converting one pointer type to another pointer type, such as from char* to int*. The static_cast can be used to cast a value from one arithmetic type to another arithmetic type. This method ensures that the conversion is valid at compile time, which avoids any runtime error that might have occurred with other cast types.

To know more about converting visit:

https://brainly.com/question/19508628

#SPJ11

The purpose of a dye penetrant is to check for cracks. It is also called dye penetration inspection. The correct option is D).

Surface-breaking faults are frequently found using dye penetrant inspection (DPI). This non-destructive testing approach also cognized as liquid penetrant inspection (LPI), is a practical way to find surface faults that can cause surface discontinuities, such as cracks, porosity, laps, and seams. It is used to check surface cracks and breaking faults.

Therefore, the correct option is D), check for cracks.

To learn more about dye penetrants, refer to the link:

https://brainly.com/question/28481756

#SPJ1

The program to illustrate the list is given below:

def isSorted(lyst):

 # Check for a list of length 1

 if(len(lyst)>=0 and len(lyst)<2):

   return True

 else:        

   for i in range(len(lyst)-1):

     if(lyst[i]>lyst[i+1]):

       return False

   # Make this statement in line with the for loop    

   return True

def main():

 lyst=[]

 print(isSorted(lyst))

 lyst=[1]

 print(isSorted(lyst))

 lyst=list(range(10))

 print(isSorted(lyst))

 lyst[9]=3

 print(isSorted(lyst))

main()

A program is a specific set of ordered operations that a computer can perform. The program in the modern computer described by John von Neumann in 1945 contains a one-at-a-time sequence of instructions that the computer follows.

Typically, the program is saved in a location accessible to the computer. A computer program is a set of instructions written in a programming language that a computer can execute.

Learn more about programs on:

https://brainly.com/question/23275071

#SPJ1

Yes, to prevent falls when mounting the tractor, you should have at least one body part in contact with the tractor at one time.

The act of mounting a tractor involves stepping up onto the machine, which can pose a risk of falls if not done carefully. To prevent such accidents, it is recommended to always have at least one body part in contact with the tractor during the mounting process. This means maintaining contact with the tractor using a hand, foot, or any other body part while transitioning onto or off of it.

By having a point of contact with the tractor, you ensure stability and a secure base of support. This helps distribute your weight evenly and reduces the likelihood of slipping, losing balance, or falling. Additionally, keeping a body part in contact with the tractor provides a physical connection that can be used to steady yourself and make necessary adjustments during the mounting or dismounting process.

To prevent falls when mounting a tractor, it is crucial to maintain contact with the machine by having at least one body part in contact at all times. This simple precautionary measure significantly reduces the risk of accidents and ensures a safer experience when operating agricultural machinery. By following this guideline, operators can promote their well-being and minimize the potential for injuries during tractor usage.

To know more about tractor, visit:

https://brainly.com/question/31659778

#SPJ11

Answer:

Computer programming is where you learn and see how computers work. People do this for a living as a job, if you get really good at it you will soon be able to program/ create a computer.

Explanation:

Hope dis helps! :)

Answer:

Because the shunt winding consist of a large number of turns,

Explanation:

It is nearly impossible to obtain satisfactory performance from a shunt motor connected to an ac power source because the shunt winding consist of a large number of turns, due to the high number of turns that the DC shunt motor has it develops a high impedance when connected to an ac power source. and due  to this high impedance the amount of current that flows through the field will be very low making it nearly impossible for the shunt motor to operate properly

The use of salt on snowy and icy roads could have a negative effect on Montgomery County's Water Supply. The salt used on the roads for melting ice can cause a number of issues for water supplies and ecosystems, and Montgomery County is no exception.

When salt is used to melt snow and ice on the road, it can dissolve into the water and run off into streams, rivers, and lakes. The salt lowers the freezing point of water and melts ice, but it also alters the chemical makeup of the water, making it more saline. It can also damage aquatic plants, animals, and fish that rely on freshwater systems.

Therefore, it is important to take steps to minimize the use of salt or to use alternatives, such as sand or beet juice, which are less harmful to the environment and water supplies.

You can learn more about Montgomery County at: brainly.com/question/29130712

#SPJ11

A petabyte is a unit of measurement for digital storage that is equivalent to 1,000,000,000,000,000 bytes, and it is the largest unit of measure for the size of a computer file.

The petabyte is the largest unit of measure for the size of a computer file. It is equivalent to 1,000,000,000,000,000 bytes or 1,000 terabytes. As the amount of digital data being generated and stored continues to grow exponentially, the petabyte has become an increasingly important unit of measure for large-scale data storage systems. Petabyte-scale data storage is used in a variety of fields, including scientific research, cloud computing, and big data analytics. With the increasing demand for data-intensive applications and services, the petabyte is expected to become a more common unit of measure for data storage in the future.

Learn more about petabyte here;

https://brainly.com/question/14718845

#SPJ11

Pilots are encouraged to turn on their landing lights when operating below 10,000 feet, day or night, and when operating within the class of airspace termed "Class B airspace" which consists of the airspace surrounding the nation's busiest airports.

Thus, pilots should turn on their landing lights when operating within the Class B airspace. It's to ensure that the visibility of the aircraft is increased to other pilots and to make the aircraft more noticeable, particularly during times when visibility might be reduced.

Hence, Pilots are encouraged to turn on their landing lights when operating below 10,000 feet, day or night, and when operating within the class of airspace termed "Class B airspace" which consists of the airspace surrounding the nation's busiest airports.

Read more about Airspace at https://brainly.com/question/31837511

#SPJ11

Incomplete question. The options read;

A. Tech A

B. Tech B

C. Both A and B

D. Neither A nor B.

Answer:

C. Both A and B

Explanation:

Technician B is correct because the technician highlighted valid reasons why draining the compressed air systems is important.

For example, since this system helps to absorb moisture or oil from storage areas they thus need to be drained periodically in other to allow for more absorption space.

Also, the reasons mentioned by Technician A are of course correct because it is generally believed that the application of lubricants such as oil helps to reduce wear and tear.

n, √n, 2/n, 2n/2, 37, 2n < n1.5 < n2 < nlogn < n log2 n < n log(n2) < n log log n < n2 log n < n3

Functions that grow at the same rate: n, √n, 2/n, 2n/2, and 37

What is function
In programming, a function is a block of code that performs a specific task. It is often used to perform a task based on given parameters, and can be reused multiple times. Functions are essential components of programming, and can be found in many different programming languages.

When a function is not functioning properly, it may not be producing the desired output or might be producing incorrect results. This could be due to a number of factors, such as incorrect syntax, a logical error in the code, or a bug in the code. In order to fix the issue, it is important to identify what is causing the malfunction and make any necessary changes to the code.

To know more about function
https://brainly.com/question/28945272
#SPJ4

Answer:

\(D_o=11.9inch\)

Explanation:

From the question we are told that:

Thickness \(T=0.5\)

Internal Pressure\(P=2.2Ksi\)

Shear stress \(\sigma=12ksi\)

Elastic modulus \(\gamma= 35000\)

Generally the equation for shear stress is mathematically given by

 \(\sigma=\frac{P*r_1}{2*t}\)

Where

r_i=internal Radius

Therefore

 \(12=\frac{2.2*r_1}{2*0.5}\)

 \(r_i=5.45\)

Generally

 \(r_o=r_1+t\)

 \(r_o=5.45+0.5\)

 \(r_o=5.95\)

Generally the equation for outer diameter is mathematically given by

 \(D_o=2r_o\)

 \(D_o=11.9inch\)

Therefore

Assuming that the thin cylinder is subjected to integral Pressure

Outer Diameter is

 \(D_o=11.9inch\)

Answer:

If an oncoming driver crosses into your path of travel, the space that is usually available for you to move your vehicle is to the right of your vehicle.

Explanation:

On many roads, there are areas on the sides of the road called the shoulder. The shoulder can be used for pulling over and stopping your vehicle due to emergencies.

If a driver crosses into your lane coming straight for you, the best thing to do is to pull over to the shoulder as fast as possible so to not turn left and hit incoming traffic.