(b) when the magnetic field gets stronger.
correct option :
When a loop rest in the plane of the page and magnetic field is directed into the page then we will apply here right hand thumb rule in which thumb represent the direction of magnetic field and curling fingers represent direction of induced current. So, in this case the direction of magnetic field is into the page and curling fingers shows induced current in clockwise direction.
Thus, option (b) is correct.
Incorrect options:
option (A) is incorrect because when magnetic field will change
according to flux.
option (C) is incorrect because field is stronger so it does not matter
size of loop increases or decreases.
option (D) is incorrect because it moves any other side the field will be
stronger.
Learn more about magnetic field induction here:
https://brainly.com/question/13610297
#SPJ4
[Your question is incomplete, but most probably your full question was-Check all that apply:
A. when the magnetic field is tilted so it is no longer perpendicular to the page
B. when the magnetic field gets stronger
C. when the size of the loop decreases
D. when the loop is moved sideways across the page]
Many people love roller coasters. Some people call them scream machines. They agree that
riding a roller coaster is a thrilling experience. What you may not realize while you are going 60 miles an hour is that a roller coaster has no
engine. You are not being propelled around the track by a motor or pulled by anything. A roller coaster moves on its own. How do you think that
can happen?
Answer:
There is some sort of "rollers" on the trail part that is used to make the roller coaster move when it is going up. Then because of that, the speed gets quicker when it drops down, so then it could move for a longer time until it reaches the next arch.
Explanation:
hope this helps :)
you are walking down a straight path in a park and notice there is another person walking some distance ahead of you. the distance between the two of you remains the same, so you deduce that you are walking at the same speed of 1.25 m/s. suddenly, you notice a wallet on the ground. you pick it up and realize it belongs to the person in front of you. to catch up, you start running at a speed of 2.65 m/s. it takes you 13.5 s to catch up and deliver the lost wallet. how far ahead of you was this person when you started running?
you start running at a speed of 2.65 m/s. it takes you 13.5 s to catch up and deliver the lost wallet. The person in front was 28.35 meters ahead of you when you started running to catch up and return their wallet.
When walking at a speed of 1.25 m/s, the distance between the two people remains the same, so we can assume that the person in front was also walking at the same speed of 1.25 m/s. When you start running at a speed of 2.65 m/s, you cover the same distance in a shorter amount of time, allowing you to catch up to the person in front. To calculate the distance between you and the person in front before you started running, we can use the formula:
distance = speed x time
When walking, the distance between you and the person in front remains constant, so we can calculate the distance using:
distance = speed x time
distance = 1.25 m/s x t
When running, you cover the same distance in a shorter amount of time, so we can calculate the distance using:
distance = speed x time
distance = 2.65 m/s x 13.5 s
Since the distance is the same in both cases, we can set them equal to each other and solve for t:
1.25 m/s x t = 2.65 m/s x 13.5 s
t = (2.65 m/s x 13.5 s) / 1.25 m/s
t = 22.68 s
Therefore, the person in front was walking for 22.68 seconds before you started running. To calculate the distance, we can plug in the value of t into the first equation:
distance = 1.25 m/s x t
distance = 1.25 m/s x 22.68 s
distance = 28.35 meters
Therefore, the person in front was 28.35 meters ahead of you when you started running to catch up and return their wallet.
learn more about speed here
https://brainly.com/question/31320008
#SPJ11
n his Book of Questions, Gregory Stock asks, "If you could spend one year in perfect happiness but afterward would remember nothing of the experience, would you [spend a year that way]?" How would you answer Stock's question? Address either the psychological or philosophical issues raised by your response.
Answer:
1111111
Explanation:
Answer:
564356
Explanation:
How do scientists determine the number of neutrons in an isotope of an atom?
They subtract the atomic number from the atomic mass.
They find the number of protons.
They divide the atomic mass by two.
They add the number of electrons and protons.
Answer:
They subtract the atomic number from the atomic mass
Hope this helps
Please mark as the brainliest
PLEASE HELP ME
A boulder is raised above the ground so that the gravitational potential energy relative to the ground is 310 J. Then it is dropped. What is its kinetic energy just before it hits the ground?
Answer:
try this
Explanation:
The energy of a falling object when it hits the ground is equaled to the energy it starts with because the potential energy is converted into kinetic energy entirely with the height at 0. This means the energy would be 200 J.
RESULT
An object travels 8 meters in the first second of travel, 8 meters again during the second second of travel, and 8 meters again during the third second. Its VELOCITY in meters per second is O 0 0 5 O 8 O 10 O more than 10 MARE
Answer:
V = (S2 - S1) / t
V = 8 m / 1 s = 8 meters /second
can you help me with this puzzle with a decoder ring
BDONC,ZVP has to be all lower case
solve today's free puzzle, you will need your Morse Code Decoder Ring from last week. This puzzle is a list of words that are related in some way. Can you decode them all and figure out their relationship?
This puzzle would be great for kids 8 and older. If you need help constructing the decoder, click here.
post signature
The Puzzle Den at 11:31 AM
Share
No comments:
the perceived frequency of a sound wave.
Frequency is perceived by humans as pitch; The sound intensity is the amplitude; Humans can only hear a specific range of sound, usually from 20 Hz to 20,000 Hz; The factors that go into a sound are its intensity, frequency and overtones (which are like interference, or background noises).
It's "Pitch" on edge.
a block weighing (Fg) 50 N is resting on a steel table (us = 0.74). The minimum force to start this block moving is what N
Answer:37
Explanation:
How can resonance overcome damping of an oscillating system?
Answer:
When one system vibrating at its natural frequency is put closer to a stationary system, the stationary system receives impulses.
At resonant frequency, the system vibrating at its own natural frequency suddenly goes on decreasing in order to cope with neighboring system.
These decrease in frequency is known as damping.
If the wheel then slows to rest in 9.46 s while making a quarter turn, calculate the magnitude of its average angular speed during that time.
Answer:
0.16 rad /s
Explanation:
Given that :
Time, t = 9.46 s
Quarter turn = 1/4 rev
θ = wt
w = angular speed `. ; t = time in second
1 rev = 2 pi
θ = 2pi
1/4 θ = 1/4 * 2pi = pi/2
θ = wt
pi/2 = w * 9.62
3.14 = w * 9.62 * 2
3.14 = 19.24w
w = 3.14 / 19.24
w = 0.1602040
w = 0.16 rad /s
PLEASE ANSWER BOTH QUICK!! 50 POINTS!!! PLEASE DON'T IGNORE!!
Answer:
A. B. Pls Give Branliest
Explanation:
Answer:
My answer got deleted.. all my brainliests too
Explanation:
A for the first, B for second.
on how many factors amount of energy carried by wave depends?
Answer:
The amount of energy carried by a wave depends on two factors:
1. Amplitude: The amplitude of a wave is the maximum displacement of the particles of the medium from their resting position. The greater the amplitude of the wave, the more energy it carries.
2. Frequency: The frequency of a wave is the number of complete cycles of the wave that occur in one second. The higher the frequency of the wave, the more energy it carries.
What is the number used as the Gravitational Constant?
Answer:
G is called the constant of gravitation and is equal to 6.67 × 10−11 newton-metre2-kilogram−2.
Explanation:
___ is NOT a homogeneous mixture vinegar glue a salad gelatin
(A) Salad, is not a homogeneous mixture.
If the chemical makeup of a combination remains constant throughout, it is considered to be homogenous. Homogeneous mixtures and pure substances are sometimes confused with one another since they are both uniforms. The uniformity of the substance's makeup matters. The amount of salt in the water can vary from sample to sample.
All solutions would be regarded as homogenous since the dissolved ingredient is distributed uniformly across the entire solution. Since none of the components of the combination have interacted with one another, the identities of the individual materials have not changed.
To learn more about homogeneous mixtures please visit-
https://brainly.com/question/9192462
#SPJ9
If a car is at rest and starts traveling at 14 m/s, how long would it take to reach 28 m from the start?
Answer:
Explanation:
The cars velocity is 14m/s. That means for every second, the car moves 14m. Now, if the car wants to reach 28m, going 14m/s, it will take 2 seconds for the car to reach 28m.
please answer the multiple choice questions
The Prospect Hill field (pg. 25) is an allusion to what oil field?
Signal Hill
Primrose Hill
Culver Hill
Beach City
Ross's pitch to the families on Prospect Hill is that
He is a speculator who will get between them and the oil men
he is an oil man who does his own drilling and has his own crew
He is a contractor and will get the job done quickly
he is from the same part of the country as them
Which item is NOT part of the oil well built on pages 59-60?
a spud
rotary table
drill-stem
draw-works
The "river of mud served three purposes" -- which of these is NOT one of them?
it kept the bit and drill-stem from heating
it made a plaster the kept the walls rigid
it turned the rotary table around
it carried away the ground-up rock
The Ross-Bankside well was flowing how many barrels a day for approximately how much every 24 hours?
15,000 barrels, $10,000/day
20,000 barrels & $16,000/day
30,000 & $13/day
16,000 barrels & $20,000/day
The allusion to the oil field in the Prospect Hill field in the book Oil! by Upton Sinclair is Signal Hill. Ross' pitch to the families in Prospect Hill is that he is an oil man who does his drilling and has his own crew.
The Prospect Hill field in the book Oil! by Upton Sinclair is an allusion to the Signal Hill oil field. Signal Hill is an elevated area in Long Beach, California, that is popular for its oil reserves. Ross's pitch to the families on Prospect Hill is that he is an oil man who does his own drilling and has his own crew. In the book Oil! by Upton Sinclair, Ross offers to drill for oil on the Prospect Hill site and claims that he is an oil man who drills for oil using his own crew.
A spud, a rotary table, and drill-stem are all components of the oil well built on pages 59-60 of the book Oil! by Upton Sinclair. Draw-works are not one of the components of the oil well. The river of mud served three purposes in the book Oil! by Upton Sinclair. The three purposes are as follows: it kept the bit and drill-stem from heating, it made a plaster that kept the walls rigid, and it carried away the ground-up rock. Turning the rotary table around is not one of the purposes of the river of mud.
To know more about drilling visit:
https://brainly.com/question/32490392
#SPJ11
Two carts, moving at opposite directions, collide and recoil. Which question would help determine if the system of two carts is open or closed? A) Do the carts have the same mass? B) Do the carts have different initial velocities? ) Is energy transferred from one cart to the other? D) Is the total momentum constant before and after the collision?
Answer:D
Explanation:
i’m not sure if that’s right but that’s what i think
Which of the following situations violates the second law of
thermodynamics?
OA. A heat pump absorbs 100 J of heat from a cool reservoir and
releases 80 J of heat to a hot reservoir.
B. A heat engine absorbs 100 J of heat from a hot reservoir and
releases 70 J of heat to a cool reservoir.
C. A heat pump absorbs 100 J of heat from a cool reservoir and
releases 120 J of heat to a hot reservoir.
D. A heat engine absorbs 100 J of heat from a hot reservoir and
releases 20 J of heat to a cool reservoir.
C. A heat pump absorbs 100 J of heat from a cool reservoir and releases 120 J of heat to a hot reservoir.
What would violate the second law of thermodynamics?In order to operate, a heat engine must reject some of the heat it receives from the high-temperature source to a low-temperature sink.
A heat engine that violates the second law converts 100 percent of this heat to work. This is physically impossible. This heat engine violates the second law of thermodynamics.
The second law can also be stated as no heat engine can have a thermal efficiency of 100 percent.
The thermal efficiency of a heat engine is defined as the ratio of the work output to the heat input:
Clearly, if the thermal efficiency of a heat engine is 100 percent,
Qin=Wout
If the second law precludes a heat engine from having a thermal efficiency of 100 percent. A heat engine is a device that converts a portion of the heat supplied to it from a high-temperature source into work. The remaining heat is rejected to a low-temperature sink.
Therefore:
A heat pump absorbs 100 J of heat from a cool reservoir and releases 120 J of heat to a hot reservoir.
Learn more about second law of thermodynamics here:
https://brainly.com/question/1368306
#SPJ1
A peach has a layer of skin, a thick section of fruit, and a pit in the center. Which of these would a peach be a good model for?
A.
the ocean
B.
the Sun
C.
the solar system
D.
the Earth
Answer:
The earth
Explanation:
Answer:
D. the Earth
Explanation:
The Earth has a solid metal core at the center, which is similar to the pit of a peach. The Earth also has many thick layers of rock and liquid metal between the surface and the center of the Earth, similar to how a peach has a layer of skin and a thick section of fruit. The other answer choices don't have any similarities to a peach. The ocean is entirely liquid, the sun is a ball of gas, and the solar system contains lots of different planets and stars that all are made up of very different things.
what is a similarity between magnetic force and gravitational force
Both magnetic force and gravitational force are fundamental forces that operate at a distance. Both forces obey an inverse square law in terms of distance, which means that the force becomes weaker as the distance between the two objects increases.
Magnetic force and gravitational force are two distinct forces, however, they do have a common similarity. They are both basic forces that operate at a distance. Both forces obey an inverse square law in terms of distance, which means that the force becomes weaker as the distance between the two objects increases.
Magnetic force is generated by the motion of electric charges, while gravitational force is generated by the mass of an object. The interaction between two objects is given by the product of their masses and the inverse square of the distance between them in the case of gravitational force.
The interaction between two magnetic objects, on the other hand, is determined by the distance between them, the magnitude of their magnetic field, and their magnetic moment, which is a measure of the strength of the magnetic field.
The force between two magnetic objects is proportional to the product of their magnetic moments and the inverse square of the distance between them. Because both magnetic force and gravitational force obey an inverse square law, they both result in an attractive force between two objects. The strength of the force varies as the distance between the objects changes.
In conclusion, the similarity between magnetic force and gravitational force is that they are both fundamental forces that operate at a distance and obey an inverse square law in terms of distance.
To know more about magnetic force visit:
brainly.com/question/10353944
#SPJ11
gravity is 3.71 m/s2. in the earth tests, when m is set to 15.0 kg and allowed to fall through 4.00 m, it gives 150.0 j of kinetic energy to the drum.
the given values, we get:m = 2(150 J) / (v = sqrt(2gh)) = 2(150 J) / sqrt(2(3.71 m/s²)(4.00 m))m ≈ 12.8 kg The mass of the object is approximately 12.8 kg.
When m is set to 15.0 kg and allowed to fall through 4.00 m, it gives 150.0 J of kinetic energy to the drum. The acceleration due to gravity is 3.71 m/s².What is kinetic energy?Kinetic energy is the energy of motion, and it is a scalar quantity that depends on an object's mass and velocity. Kinetic energy can be calculated using the following
formula:K.E. = 1/2mv²where m is the mass of the object and v is the velocity of the object.What is the given kinetic energy?The given kinetic energy is 150 J.What is the mass of the object?Using the formula for kinetic energy, we can rearrange it to solve for m. Thus, we get:K.E. = 1/2mv² ⇒ 2K.E. = mv² ⇒ m = 2K.E. / v²Substituting
The following values are obtained from the given ones:m = 2(150 J) / (v = sqrt(2gh)) = 2(150 J) / sqrt(2(3.71 m/s2)(4.00 m)). m ≈ 12.8 kg The thing weighs about 12.8 kg.
To learn more about : approximately
https://brainly.com/question/12785175
#SPJ11
The pressure of a gas produces a net force (the sum of all the forces) at ____ angles to the wall of a container.
Answer: RIGHT angles
Explanation:
The pressure of gas produces a net force, i.e., the sum of all the forces at right angles to the wall of a container.
What is Pressure?A key idea in physics is pressure, which is measured as the amount of force per unit area acting perpendicular to a surface.
Imagine holding a tack between your forefinger and thumb, with the head on your forefinger and the pointy end on your thumb, and lightly pressing it there to comprehend pressure. The forefinger will not experience discomfort, but the thumb will feel it right away. The thumb is under the same amount of pressure as the forefinger due to the tack's limited surface area, but the pressure on the thumb is significantly greater.
A net force pressing on the container walls is created as a result of collisions with the container. Gas pressure is a result of this force acting perpendicular to the container walls. A pressure gauge can be used to measure this pressure.
To get more information about Pressure :
https://brainly.com/question/15175692
#SPJ2
1. How much energy is needed just to melt 0.56kg of ice at 0◦ C?
2. How much energy is needed just to boil 5kg of water at 100◦ C?
3. What is the specific heat of metal if its mass is 27 g and it requires 420 J of heat energy to
increase its temperature from 25°C to 50°C?
please help me out I dont have much time
Answer:
This will require 266.9 of heat energy.
Explanation:
To calculate the energy required to raise the temperature of any given substance, here's what you require:The mass of the material, m The temperature change that occurs, ΔT The specific heat capacity of the material,
c
(which you can look up). This is the amount of heat required to raise 1 gram of that substance by 1°C.
Here is a source of values of
c for different substances:
Once you have all that, this is the equation:
Q=m×c×ΔT(Q is usually used to symbolize that heat required in a case like this.)For water, the value of c is 4.186g°C So, Q=750×4.186×85=266=858=266.858
A 5 kg rifle fires a 15 g bullet at a muzzle velocity of 600 m/s. Find the recoil velocity of
the rifle
Answer:
v₂ = 1.8 [m/s]
Explanation:
To be able to solve this problem we must raise the principle of conservation and quantity of movement. It is going to study the momentum before and after the firing of the rifle.
P = m*v
where:
P = momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
Now we need to analyze the moment before and after the shot.
\((m_{1}+m_{2})*v_{1}=-(m_{1}*v_{2})+(m_{2}*v_{3})\)
where:
m₁ = mass of the rifle = 5 [kg]
v₁ = velocity of the rifle and the bullet before firing = 0 (no movement)
m₂ = mass of the bullet = 15 [g] = 0.015 [kg]
v₂ = velocity of recoil [m/s]
v₃ = velocity of the bullet after firing = 600 [m/s]
Now replacing:
\((5+0.015)*0 = -(5*v_{2})+(0.015*600)\\9 = (5*v_{2})\\v_{2}=1.8 [m/s]\)
Momentum is the product of mass and velocity. The recoil velocity of the rifle weighing 5 kg is 1.8 m/s.
What is conservation of momentum?According to the law of conservation of momentum if two objects are in contact with each other then for that system of the two objects the momentum of the object before will be equal to the momentum of the object after the collision.
GIven to us
Mass of the rifle, M = 5 kg
Mass of the bullet, m = 15 g = 0.015 kg
Velocity of the bullet afterwards, v₂ = 600 m/s
We know that according to the law of conservation of momentum, the momentum of the bullet and riffle before shooting will be equal to the momentum of the bullet and riffle after shooting.
\(Mu_1 + mu_1 = Mv_1 + mv_2\)
Since, before shooting the bullet was in the riffle and the velocity of both was 0,
\(M(0) + m(0) = Mv_1 + mv_2\\\\-Mv_1 = mv_2\\\\v_1 = -\dfrac{m \times v_2}{M}\)
Substitute the values,
\(v_1 = -\dfrac{0.015 \times 600}{5}\\\\v_1 = -1.8\rm\ m/s\)
Thus, the recoil of the rifle is -1.8 m/s, the negative sign denotes that the velocity of recoil was in opposite direction to the bullet.
Hence, the recoil velocity of the rifle weighing 5 kg is 1.8 m/s.
Learn more about Momentum:
https://brainly.com/question/4956182
suppose that a car's radiator contains 2.0kg of water. The water absorbs energy from the car engine. In the process, the water's temperature increases from 298K to 355K. How much energy did the water absorb?
The amount of heat energy the water absorbed, given that the water's temperature increases from 298 K to 355 K is 476976 J
How do I determine the heat absorbed?We know from calorimetry, that heat energy is given by:
Q = MCΔT
Where
Q is the heat energy absorbed or releasedM is the massC is specific heat capacityΔT is the temperature changeWith the above formula, we can determine the heat energy absorbed as follow:
Mass of water (M) = 2.0 KgInitial temperature (T₁) = 298 KFinal temperature (T₂) = 355 KTemperature change (ΔT) = 355 – 298 = 57 KSpecific heat capacity of water (C) = 4184 J/KgºC Heat absorbed (Q) =?Q = MCΔT
Q = 2 × 4184 × 57
Q = 476976 J
Thus, from the above calculation, we can conclude that the heat absorbed is 476976 J
Learn more about heat absorbed:
https://brainly.com/question/16398667
#SPJ1
what is the wavelength, of x-rays with a frequency 1.5 * 10^18 hertz traveling in a vacuum?
The wavelength of x-rays with a frequency of 1.5 × 10^18 Hz traveling in a vacuum is approximately 0.2 nanometers.
The speed of light in a vacuum is approximately 299,792,458 meters per second. The wavelength of electromagnetic radiation can be calculated using the following formula:
wavelength = speed of light / frequency
Substituting the given values, we get:
wavelength = 299,792,458 m/s / 1.5 × 10^18 Hz
wavelength = 0.1999 × 10^-9 meters
wavelength ≈ 0.2 nm (nanometers)
Therefore, the wavelength of x-rays with a frequency of 1.5 × 10^18 Hz traveling in a vacuum is approximately 0.2 nanometers.
For more such questions on Wavelength
https://brainly.com/question/29213586
#SPJ11
What do the planets have in common and how are they different?
Answer:
They vary quite a lot, yet there are some similarities
Explanation:
With Mercury, you have a hot and barren expanse of rock
With Venus, you also have a fairly hot and barren expanse of rock, with a molten core
With Earth, you have a warm/cool variant with water and a full atmosphere
With Mars, you have a colder and barren expanse of valleys and rock, with a rather paste-like ground
With Jupiter, we have our first gas giant, covered in clouds with a thick atmosphere
With Saturn, it is yet another gas giant, with rings of gas and rock and a dense core of metals, such as iron and nickel
With Uranus, it is also rather gas-full with a fair amount of water and methane, which results in its bluish color (an ice giant)
And finally with Neptune, it is the other ice giant, consisting of water, methane, and ammonia
So there are some similarities (gases, water, land formations, etc.) and some differences (rings, temperature, structure, etc.). Our planets are very unique to one another and continue to engage and surprise us.
Describe the magnetic field of a south-south pole arrangement.
When one south pole's magnetic field line comes close to another south pole, the second south pole's field lines will begin to bend away from the first south pole.
What configuration do magnetic poles have?A bar magnet suspended in the Earth's magnetic field will naturally point north and south. Any pole that pursues the north is referred to as a north magnetic pole, such as the north-seeking pole of this sort of magnet. The south-seeking pole or any pole that resembles it is a south magnetic pole.
What takes place at the magnet's south pole?Like poles repel one another whereas opposite poles are attracted to one another. Therefore, when the south pole of a magnet is brought close to the north pole of a magnetic needle that is suspended freely, it will attract. A. When the South pole of a magnet is brought close to the North pole of a magnetic needle that is suspended freely, they will both attract one another.
To know more about magnetic field visit:
https://brainly.com/question/26257705
#SPJ1
How is Newton's first law affected in our everyday life? Write a report about this.
The Newton's first law affect in our everyday life because we are either in motion or at rest.
What is Newton's first law of motion?
Newton's first law of motion states that an object at rest or uniform motion in a straight line will continue in that path unless acted upon by an external force.
This law is also known as law of inertia because it depends on the mass of the object.
The greater the mass of an object the greater the inertia.
Examples of everyday life activities that involves Newton's first law of motion;
- a car moving on the road
- a student running to school
- a booking resting on a table
- a rugby player running with the ball
Thus, the Newton's first law affect in our everyday life because we are either in motion or at rest.
Learn more about Newton's first law of motion here: https://brainly.com/question/10454047
#SPJ1