A spring-mass-damper system has mass m = 2.4 kg, viscous damping coefficient c = 10 Ns/m, and stiffness = 360 N/m. Determine the undamped natural frequency, damping ratio, critical damping coefficient, damped natural frequency, and approximate settling time. If the mass is given an initial displacement of 10 mm and released from rest, find the displacement after 0.25 seconds.

Answer:

X = 1 (1st digit in the code)

Y = 0 (2nd digit)

Z = 4 (3rd multiplier digit)

104 → 10 × 10^4 Ω

→ 10 × 10000Ω

→ 100 kΩ

resistors are marked 104, 105, 205, 751, and 754. The resistor marked with 104 should be 100kΩ (10x10^4), 105 would be 1MΩ (10x10^5), and 205 is 2MΩ (20x10^5). 751 is 750Ω (75x10^1), and 754 is 750kΩ (75x10^4).

Here we need to understand how a code in a resistor gives us information on the resistor. Here we will see that the code means that the resistance is 100,000 Ω.

When we use numbers, let's assume that we have 3 single-digit numbers abc.

So if the code in our resistor is abc, this will mean that the resistance of the resistor is:

ab×10^c Ω

Using this general rule we can see that if the code is 104, then the resistance will be:

r = 10×10^4 Ω

 = 100,000 Ω

Then we can conclude that the resistive value of this resistor is  100,000 Ω

If you want to learn more, you can read:

https://brainly.com/question/74415

Mass media is not typically considered a social institution.

Instead, it is often regarded as a societal subsystem or a form of communication and information dissemination. Social institutions, on the other hand, are recognized as established systems or structures that fulfill specific functions and play crucial roles in society.

Let's briefly discuss the other options:

b. Peer group: Peer groups, consisting of individuals of similar age, social status, or interests, are considered social institutions. They provide a context for socialization, support, and the development of shared norms and values.

c. Healthcare: Healthcare is recognized as a social institution. It encompasses various organizations, professionals, and systems that provide medical services, promote public health, and address individual and community well-being.

d. Government: Government is a fundamental social institution responsible for establishing and enforcing laws, maintaining social order, providing public services, and managing governance and decision-making processes within a society.

It's worth noting that the classification of social institutions may vary among sociologists, and there can be debates and variations in their definitions. However, in general, mass media is not typically considered a social institution due to its distinct characteristics and functions compared to recognized social institutions like education, family, religion, economy, healthcare, and government.

Thus, the correct option is "a".

Learn more about Mass media:

https://brainly.com/question/30706530

#SPJ11

The best description for the operation of a television remote control is option (c) encoding and transmitting. This is because the remote control encodes the user's input (e.g. pressing a button to change the channel) into a specific infrared signal, which is then transmitted from the remote control to the television receiver.

This is correct because the infrared signal from the remote control is not decoded or stored within the remote control. Instead, it is an encoded signal that is sent directly to the television receiver to perform a specific function. The encoding and transmission of the infrared signal is what allows the remote control to operate the television from a distance.

Option (a) decoding and storing is not correct because the remote control does not decode or store any signals. Option (b) storing and retrieving is also not correct because the remote control does not store any signals to be retrieved later. It only transmits an encoded signal in real-time to operate the television receiver.

Therefore, the correct description for the operation of a television remote control is encoding and transmitting. The remote control encodes the user's input into an infrared signal, which is then transmitted to the television receiver to perform a specific function. This allows the viewer to change channels or perform other functions from a distance.

You can learn more about remote control at

https://brainly.com/question/15209855

#SPJ11

Answer:

B

Explanation:

A short statement that describes what you want

A goal or aim best describes an objective statement.

What is objective statement?

Objectives are utilised in many different corporate and job-search scenarios. They are brief sentences that express just what you desire. While your ultimate objective may be to find work, your resume statement may mention that you wish to work as a nurse. In a business setting, aim statements contain specifics on how you intend to attain a corporate goal. In the past, one of the most typical places to see goal statements was in resumes. They were the one to three lines of text at the top of a resume that notified an employer a little about the candidate's level of experience and the type of job they desired.

An objective statement is a brief, position-centered statement that describes the value you can provide and the needs you can meet. A concise explanation of the skills and qualifications you will offer to a position may be included in an objective. A professional summary is more detailed and longer than an objective statement.

So, the right answer is B.

To learn more about objective statement

https://brainly.com/question/18076380

#SPJ2

The documents that instruct firefighters regarding the size and capacity of a building's standpipe systems and the pumps supplying those systems are called: "Fire department Preplan.

A fire pre-plan is a scenario-based plan that is tailored to a specific process area or piece of equipment. The site emergency response plan should include a reference to all fire pre-plans. They should explain how to utilize the fire prevention and emergency response systems in certain fire case situations.

Items that should be included in a pre-plan include:

The fire service's management principles include discipline, division of work, unity of command, and line of authority. Building codes control the materials used in building. It is valuable to explore the past and present fire service.

Learn more about firefighters;
https://brainly.com/question/1023064
#SPJ1

P is the nοrmal fοrce alοng the x-axis, Py is the nοrmal fοrce alοng the y-axis, V is the shearing fοrce alοng the x-axis, and Vy is the shearing fοrce alοng the y-axis.

Shearing bοundary fοrce is an external fοrce applied tο a sοlid bοdy, usually in the fοrm οf a nοrmal fοrce, that causes the bοdy tο defοrm. The fοrce is applied in a directiοn perpendicular tο the surface οf the bοdy and acts tο reduce οr increase the relative displacement οf the bοdy's particles, resulting in an οverall shearing οf the bοdy.

Stress functiοn φ = pry is a mathematical expressiοn that describes the stress state in a plate. It states that stresses in the plate are prοpοrtiοnal tο the distance frοm the οrigin, r, and the cοnstant, p. The resultant nοrmal and shearing bοundary fοrces (P, Py, V, and Vy) alοng all edges οf the plate can then be calculated using the stress functiοn.

P is the nοrmal fοrce alοng the x-axis, Py is the nοrmal fοrce alοng the y-axis, V is the shearing fοrce alοng the x-axis, and Vy is the shearing fοrce alοng the y-axis.

For more questions related to stress,

brainly.com/question/25632718

#SPJ4

The electronic components that could be used in making of energy saving switch are:​

Transistors as  well as other kinds of semiconductor devices are known to be tools or element that can be used in the making of switches. In its use or applications.

Note that the base or gate of a transistor, based  on the kind of transistor that is known to be in use, and it is one that is often employed as a form of control element to be able to switch on as well as switch off the current that often exist between the emitter as well as the collector or the source and that of the drain.

Note also that the electronic components that are able to  store energy in regards to electronic devices, are known to be capacitors and coils (inductors) and they often play a key function of temporarily saving  energy. One key role of a capacitor is to save an electric charge.

Therefore, The electronic components that could be used in making of energy saving switch are:​

Learn more about energy saving switch from

https://brainly.com/question/24670770
#SPJ1

Answer:

A hose roller

Explanation:

The statement It is similar to sleep-walking Option(b) is the one that best describes "sleep-driving".

Driving while fatigued or drowsy is known as sleep driving. This typically occurs when a driver hasn't had enough sleep, but it can also occur as a result of untreated sleep disorders, drug use, alcohol consumption, or shift employment.

According to the Division of Sleep Medicine at Harvard Medical School, there are 250,000 drivers who consistently fall asleep behind the wheel in the United States. In a public survey conducted by the National Sleep Foundation, 54% of adult drivers admitted to driving while drowsy in the previous year, with 28% admitting to actually falling asleep behind the wheel.

The National Highway Traffic Safety Administration estimates that tired driving causes more than 100,000 accidents, resulting in around 6,550 fatalities.

To learn more about sleep-driving refer to

https://brainly.com/question/18864564

#SPJ1

The assertion It is comparable to sleepwalking. Option (b) best describes "sleep-driving"

To learn more about sleep-driving refer to

https://brainly.com/question/28539698

#SPJ1

Answer:

Hello the diagram related to the question is missing attached is the diagram

Answer : 3833.33 KN

Explanation:

The most nearly reaction force at B

= ∑ Mb = 0 = 21Ay

= (2000 * 17.5 ) + ( 3000 * 10.5 ) + ( 4000 * 3.5 )

= 35000 + 31500 + 14000 = 80500

therefore Ay = 80500 / 21 = 3833.33 KN

x = 7/2 = 3.5m

Answer:

"Use your gloves correctly" and "Inspect your gloves for any damage before wearing."

Explanation:

If you don't use your gloves correctly you could risk your hands being infected/burned. If your gloves are damaged they will provide minimum protection but there is still a potential safety hazard.

Answer:

Use your gloves correctly

Inspect your gloves for any damage before wearing

Answer:

P = 9.65 hp

Explanation:

Given that,

Speed of a car, v = 90 ft/s

Force that opposes the motion of the car, F = 59 pounds-force

90 ft/s = 27.432 m/s

1 pound-force = 4.448 N

59 pounds-force = 262.445 N

Power required is given by :

\(P=F\times v\\\\P=262.445\ N\times 27.432\ m/s\\\\P=7199.391\ W\)

Since, 1 hp = 745.7

7199.391 W = 9.65 hp

So, 9.65 hp of power is required to overcome the drag.

Answer:

D). Eesha  pays more than the minimum payment each month.

Explanation:

Eesha would be considered most creditworthy among the given persons as she not only pays on time but also repays more than the minimum amount assigned to pay each month. In order to test the creditworthiness of an individual, his ontime debt paying capability is tested at first followed by the past credit repayment history and the credit score. Except Eesha, all the given candidates have failed to make timely repayment of their debts and hence, they cannot be considered creditworthy.

Answer:

Aerobic biological treatment process

Explanation:

Aerobic biological treatment process in which micro-organisms, in the presence of oxygen, metabolize organic waste matter in the water, thereby producing more micro-organisms and inorganic waste matter like CO₂, NH₃ and H₂O.

Answer:

...

Explanation:

...

Answer:

yes

Explanation:

an idea could be a jack o lantern monster since it Halloween tomorrow  

Answer:

UI Design

Explanation:

The maximum rating for a non-time delay fuse for a 40-horsepower, 230-volt, 3-phase synchronous motor using non-time delay fuses for short-circuit and ground-fault protection is 93.6 amps.

Given that,

The motor is a 40-horsepower, 230-volt, 3-phase synchronous motor

Non-time delay fuses are used for motor branch-circuit short-circuit and ground-fault protection

The maximum rating for the non-time delay fuse needs to be calculated

To determine the maximum rating for a non-time delay fuse for the given motor, we'll need to use the following formula:

Maximum fuse rating = 125% x motor full-load current

First, we need to determine the full-load current of the motor.

We can do this by using the following formula:

Full-load current = (horsepower x 746) / (√(3) x voltage)

Plugging in the values we have, we get:

Full-load current = (40 x 746) / (√(3) x 230) = 74.9 amps

Now we can use this value to calculate the maximum fuse rating:

Maximum fuse rating = 125% x 81.4 amps = 93.6 amps

So, the maximum rating for a non-time delay fuse for the given motor is 93.6 amps.

To learn more about current wave visit:

https://brainly.com/question/2047302

#SPJ4

Answer:

Zoning is like a hammer because it is used as a tool for urban planning.

Answer: border-radius

Explanation:

When it comes to combining multiple documents, an important word processing skill to know that ensures the final result is organized and easy to use is pagination.

Pagination is a page numbering technique that is done sequentially. These page numbers are usually located at the top or bottom of the web page. In most cases, it is used for main pages and partitions in corporate websites. This kind of design can generally make the user experience simpler on the site. They can also feel more comfortable when it comes to distributing and navigating products within the website.

For example, like this, imagine an e-commerce site that consists of hundreds of product catalogs from various categories. Of course, these products will not be found easily if only placed on one page. As a solution, UI developers and designers can take advantage of pagination to make product placement more structured.

Learn more about Pagination here brainly.com/question/17205277

#SPJ4

A handsfree device may be used if it can be activated or deactivate with a cellphone.

Handsfree is a device which when connected to a cell device can be used in listening to audio, video and messages.

A driver can also activate or deactivate with a swipe when connect to the vehicle audio device.

Therefore,

A handsfree device may be used if it can be activated or deactivate with a cellphone.

Learn more on handsfree below

https://brainly.com/question/12253610

#SPJ1

Answer:

the answer would be B motor

Answer:

positive sides:

negative sides:

Answer:

See below

Explanation:

Enter-key also called the "Return key," it is the keyboard key that is pressed to signal the computer to input the line of data or the command that has just been typed.It Was the Return KeyThe Enter key was originally the "Return key" on a typewriter, which caused the carriage to return to the beginning of the next line on the paper. In a word processing or text editing application, pressing Enter ends a paragraph. A character code for return/end-of-line, which is different in Windows than it is in the Mac, Linux or Unix, is inserted into the text at that point.

Answer:

True

Explanation:

Once there are two yellow lines having inner broken lines on the two sides of a center traffic lane, what this is trying to tell you is that you can use those lanes to start a left hand turn, or a U-turn from the both directions of traffic. However you cannot use it for passing. This is sometimes misunderstood by road users and drivers.

Answer:

Gasoline is injected directly into the cylinder.

Explanation:

In a direct injection system, the air and gasoline are not pre-mixed. Rather, air comes in using the intake manifold, while the gasoline is injected directly into the cylinder.

Answer:

a) The operation of a heat pump involves the extraction of energy in the form of heat Q₁ from a cold source

b) The modifications required to convert a plant operating on an ideal Carnot cycle to a plant operating on a Rankine cycle involves

i) Complete condensation of the vapor at the condenser to saturated liquid for pumping to the boiler

ii) Heating of the pumped, pressurized water to the boiler pressure

Explanation:

a) 1 - 2. Wet vapor enters compressor where it undergoes isentropic compression to state 2 by work W₁₂  

2 - 3. The vapor enters the condenser at state 2 where it undergoes isobaric and isothermal condensation to a liquid with the evolution of heat  Q₂

3 - 4. The condensed liquid is expanded isentropically with the work done equal to W₃₋₄

4 - 1. At the state 4, with reduced pressure from the previous expansion, the liquid makes its way to the evaporator where it absorbs heat, Q₁, from the body to be cooled.

b. i) Complete condensation of the vapor at the condenser to saturated liquid for pumping to the boiler

Here the condensation process is modified from partial condensation to complete condensation at the same temperature which reduces the size of the pump required to pump the liquid water as opposed to pumping steam plus liquid

ii) Heating of the pumped, pressurized water to the boiler pressure

The pumped water at state 4 will be required to be heated to saturated water temperature equivalent to the boiler pressure, hence heat will need to be added at state.

Sketches of the schematic of a Basic Rankine cycle is attached  

On page 391, CRM states that it opposes any undermining of legitimate power.

In order to implement crew resource management, fire and rescue service leadership and operating cultures that have developed through generations must be changed. The objectives of CRM are to maximize human performance and minimize the impact of human error on operations.

Teams can overcome problems with poor resource management, ineffective decision-making, insufficient or unclear leadership, and poor communication by using crew resource management. CRM's objective is to enable a team to efficiently utilize all of its tools and expertise to accomplish its objectives.

To know more about CRM visit :-

https://brainly.com/question/13100608

#SPJ4