A text file has 456789 letters. If the text file is text wrapped to 80 characters per line (a line folds to the next after 80 columns of characters from the left), the number of lines with letters in the text file would be: . How many letters are in the last line

Answer:

Python recognizes a tuple when you have parenthesis and a comma. You use brackets when you're creating a list.

You cannot declare a tuple in that format. It has to be:

myTuple = (__, __) or something of the like. There are many ways you can do it, just not the way that you have it.

Explanation:

Python class.

Answer: parantheses AND COMMAS

Explanation:

If a firm chooses the IP address range 10.x.x.x for its internal network, it is using Class A private addressing. In this case, the firm can have a maximum of 16,777,214 hosts internally. The Class A IP address range allows for 16,777,216 total addresses, but two addresses are reserved for network and broadcast purposes.

Therefore, the firm can utilize 16,777,214 hosts within its internal network. It is important to note that this answer assumes the firm is using a subnet mask of /8, which is the default subnet mask for Class A addressing.

Looking to the future, AI is expected to play a significant role in various industries, including healthcare, finance, and transportation. Challenges like ethics, privacy, and job displacement remain, but efforts are being made to address them.

To know more about network visit:

https://brainly.com/question/33577924

#SPJ11

A title bar, menu bar, windows menu, minimise, maximise, restore, close, sizing border, client area, horizontal scroll bar, and vertical scroll bar are some of the components found in an application window.

The main window, which is always created by a graphical Windows-based application, acts as the main point of contact between the user and the programme. To complete activities connected to the primary window, most apps also produce other windows, either directly or indirectly. Each window participates in the output display and user input processes.

The system also creates a taskbar button for each application when you launch it. The application icon and title are located on the taskbar button. The taskbar button for the programme is seen pressed when it is running.

All of these elements are normally seen in the main window of an application. These elements are depicted in a typical main window in the figure that follows.

Learn more about Windows here:

https://brainly.com/question/29976015

#SPJ4

Answer:

land

Explanation:

Vertical farming is a modern method of farming or growing crops and vegetation. It allows growing of crops in stacked layers which is vertical. The crops are grown in a well equipment controlled-environment set up.

Vertical farming is done where there is fewer land resources as well as water resources. The main is to increase the crop yield with a very less use of land resources. But it requires more energy than the conventional energy.

Answer:

how.much higher??? 5cm.

Explanation:

or unless it was a different approach-

then it would have gone 50 cm which is 19.6 inches

Answer:

Yes, the deletion of a question that you answered can affect your points and score on Brainly. When you answer a question on Brainly, you earn points and your score increases. However, if the question is later deleted by the asker or by the moderators, the points you earned from answering that question will be deducted from your account and your score will decrease accordingly. It's important to note that if the deletion is due to a violation of Brainly's Community Guidelines, your account may also be subject to additional penalties or restrictions.

Incomplete/Incorrect question:

Provide an example by creating a short story or explanation of an instance where confidentiality would be broken.​

Explanation:

Note, the term confidentiality refers to a state or relationship between two parties in which private information is kept secret and not disclosed by those who are part of that relationship. Confidentiality is broken when this restricted information is disclosed to others without the consent of others.

For instance, a Doctor begins to share the health information of a patient (eg a popular celebrity, etc) with others such as his family members and friend

s without the consent of the celebrity.

They can use a keyboard if booting into BSOS or typing in command prompt.

Mouse To move around and click on the tabs or whatever.

And the PC if needing to switch parts, repair, or see whats wrong with them

MRP will generate an order with a due date of 12/10/2013.

To determine the due date of the order generated by MRP, we need to consider the lead time. Lead time is the time it takes for a product to be delivered after placing an order. It includes processing time, manufacturing time, and transportation time.

Let's assume that the lead time is 7 days. To calculate the due date, we add the lead time to the requirement date.

Requirement date: 12/3/2013
Lead time: 7 days

Adding the lead time to the requirement date:
12/3/2013 + 7 days = 12/10/2013

Therefore, MRP will generate an order with a due date of 12/10/2013.

To know more about MRP, visit:

https://brainly.com/question/33339879

#SPJ11

Apple's application provenance requires developers who wish to publish consumer applications to distribute and sell through the apple app store is a false statement.

An app is free if it has a Get button on the App Store rather than a price. A free program that you download won't cost you anything. You can buy subscriptions and in-app purchases for certain free apps. More features, material, and other things are accessible to you through subscriptions and in-app purchases.

Note that For mobile apps running on its iOS and iPadOS operating systems, Apple Inc. developed and maintains the App Store platform. Users can browse and download approved apps created by Apple's iOS Software Development from the store. The statement is false because there is no provision for those.

Learn more about apple app  from

https://brainly.com/question/23878113
#SPJ1

Answer:

d . commercial potential

Explanation:

The commercial potential of the technology would be a very important detail to look at before purchasing the new system of computer storage from the startup company.

This is important because the IT firm would be eager to know how the market would accept the product when it is launched. If the public does not like the product, then the firm would suffer a loss, this is why it is paramount.

Structs in C have grown to be identical to object orientation except that the base assumption is that the default visibility modifier is public.The statement is false.

While structs in C can have properties and methods similar to object-oriented programming, they do not have the concept of inheritance or encapsulation like classes in object-oriented programming. Structs in C also have a default visibility modifier of public, which means that all properties and methods are accessible from outside the struct. However, this does not make them identical to object-oriented programming.
In summary, structs in C can have similarities to object-oriented programming, but they are not identical. While structs have a default visibility modifier of public, they do not have the concept of inheritance or encapsulation like classes in object-oriented programming.

To know more about  object orientation visit:

brainly.com/question/28505983

#SPJ11

Imperfect markets are characterized by having competition for market share, high barriers to entry and exit, different products and services, and a small number of buyers and sellers. Perfect markets are theoretical and cannot exist in the real world; all real-world markets are imperfect markets.

A photonic transmitter chip converts electrical signals into optical signals, enabling data transmission over fiber optic cables.

It modulates the intensity, phase, and polarization of the optical signals, encoding digital data into light pulses that can travel long distances without significant signal degradation.

Compared to traditional electronic transmitters, photonic transmitters offer higher bandwidth, faster data transfer rates, and lower power consumption.

They have revolutionized network speeds by enabling the development of high-speed, low-latency networks, such as 5G wireless, data centers, and supercomputers, and are crucial for future applications such as quantum computing and artificial intelligence.

Read more about data transmission here:

https://brainly.com/question/24373056

#SPJ1

Zenmap is a graphical interface for the Nmap network scanner that can be used to scan networks and identify hosts and services. When scanning a network,  Zenmap sends out packets to various IP addresses to determine which ones are active and responding.

It can also gather information about the operating systems, services, and ports running on the hosts that respond to the scan. Zenmap can provide a lot of information about a network, but the specific details depend on the type of scan performed, the options selected, and the specific network being scanned.

In general, a scan of a small network with only a few hosts may return results quickly and provide a lot of detail about each host. A scan of a large network with many hosts may take a long time to complete and only provide basic information about each host due to the large amount of data being collected.

To know more about interface visit:

https://brainly.com/question/14154472

#SPJ11

Answer:

A search engine

Explanation:

View the pdf

In computer networking, a computer system or application that acts as an intermediary between another computer and the internet is commonly referred to as a proxy.

A proxy server, or simply a proxy, is a computer system or application that sits between a client computer and the internet. Its main function is to facilitate communication between the client and other servers on the internet. When a client sends a request to access a website or any online resource, the request is first directed to the proxy server.

The proxy then forwards the request to the appropriate server and relays the response back to the client. Proxies are often used for various purposes such as caching, filtering, security, and anonymity.

Learn more about security click here:

https://brainly.com/question/32133916

#SPJ11

Answer:

Unfortunately, I cannot see the image you are referring to. However, I can provide the general formula for calculating the cloud ceiling using the method you described.

To calculate the cloud ceiling, you need to measure the angle between the ground and where the beam of light hits the clouds, and you also need to know the distance between the spotlight and the point on the ground directly below where the beam hits the clouds. Let's call this distance "d", and let's call the angle between the ground and the beam of light "θ".

Then, the cloud ceiling can be calculated using the tan function:

tan(θ) = cloud ceiling / d

Solving for the cloud ceiling, we get:

cloud ceiling = d * tan(θ)

In your specific case, if the spotlight is 0.75 km from the hangar door, then you need to measure the angle θ between the ground and where the beam of light hits the clouds, and you need to measure the distance "d" between the spotlight and the point on the ground directly below where the beam hits the clouds.

Once you have these measurements, you can use the formula above to calculate the cloud ceiling. Remember to use consistent units for all measurements (for example, kilometers for distance and degrees for angles).

Explanation:

Having a length field in the header of protocols configured on top of Ethernet is important because:

it allows network devices to determine the boundaries of a message, which is necessary for proper processing of the data.

The length field indicates the total size of the packet, including the header and payload, in bytes.

This information is used by network devices, such as switches and routers, to determine the end of a packet and to properly forward or process it.

Without the length field, network devices would have difficulty determining where one packet ends and the next begins, leading to potential data corruption or loss.

The length field in a protocol header is a crucial component of network communication.

In a network, data is transmitted in the form of packets, which are composed of a header and a payload. The header contains information about the packet, such as its source and destination, as well as any additional control information needed for the packet to be properly processed by network devices.

The length field specifically tells network devices how many bytes the entire packet is, including the header and payload. This information is important because it allows network devices to determine where one packet ends and the next begins.

Without this information, network devices would have trouble processing the data correctly, as they would not know how much data to read before moving on to the next packet.

Learn more about length field in a protocol header:

brainly.com/question/29659609

#SPJ4

Answer:

Music means a lot to almost everyone and plays a significant role in most people's lives. With all of the different genres, music encompasses a wide range of moods and emotions, and there is something for almost everyone.

Answer:

Music plays a crucial role in several people's lives. There is proof that music has helped benefit people's lives to be more positive, and some studies show that students that listened to music and meditated with music during school, had anxiety levels less than students who didn't get such an opportunity.

Explanation:

(I've read a paper somewhere for school for a health project abt stress and anxiety)

Answer:

Description

Explanation:

To improve accuracy during user input, a designer can add context to the Description from the properties screen which will be displayed in the status bar to provide additional information to users who are entering data.

A program that calculates the insurance payment category based on the BMI score is given below:

import java.io.FileWriter;

import java.io.IOException;

import java.io.PrintWriter;

import java.util.ArrayList;

import java.util.Scanner;

public class Patient {

   private String patientName;

   private String dob;

  private double weight;

   private double height;

   // constructor takes all the details - name, dob, height and weight

   public Patient(String patientName, String dob, double weight, double height) {

       this.patientName = patientName;

       this.dob = dob;

       if (weight < 0 || height < 0)

           throw new IllegalArgumentException("Invalid Weight/Height entered");

       this.weight = weight;

       this.height = height;

   }

   public String getPatientName() {

       return patientName;

   }

   public String getDob() {

       return dob;

   }

   public double getWeight() {

       return weight;

   }

   public double getHeight() {

       return height;

   }

   // calculate the BMI and returns the value

   public double calculateBMI() {

       return weight / (height * height);

   }

   public static void main(String[] args) {

       ArrayList<Patient> patients = new ArrayList<Patient>();

       Scanner scanner = new Scanner(System.in);

       // loop until user presses Q

       while (true) {

           System.out.print("Enter patient name: ");

           String patientName = scanner.nextLine();

           System.out.print("Enter birthdate(mm/dd/yyyy): ");

           String dob = scanner.nextLine();

           System.out.print("Enter weight (kg): ");

           double wt = scanner.nextDouble();

           System.out.print("Enter height (meters): ");

           double height = scanner.nextDouble();

           try {

               Patient aPatient = new Patient(patientName, dob, wt, height);

               patients.add(aPatient);

           } catch (IllegalArgumentException exception) {

               System.out.println(exception.getMessage());

           }

           scanner.nextLine();

           System.out.print("Do you want to quit(press q/Q):");

           String quit = scanner.nextLine();

           if (quit.equalsIgnoreCase("q")) break;

       }

       try {

           saveToFile(patients);

           System.out.println("Data saved in file successfully.");

       } catch (IOException e) {

           System.out.println("Unable to write datat to file.");

       }

   }

   // takes in the list of patient objects and write them to file

   private static void saveToFile(ArrayList<Patient> patients) throws IOException {

       PrintWriter writer = new PrintWriter(new FileWriter("F:\\patients.txt"));

       for (Patient patient : patients) {

           double bmi = patient.calculateBMI();

           StringBuilder builder = new StringBuilder();

           builder.append(patient.getPatientName()).append(",");

           builder.append(patient.getDob()).append(",");

           builder.append(patient.getHeight()).append(" meters,");

           builder.append(patient.getWeight()).append(" kg(s), ");

           if (bmi <= 18.5) builder.append("Insurance Category: Low");

           else if (bmi <= 24.9) builder.append("Insurance Category: Low");

           else if (bmi <= 29.9) builder.append("Insurance Category: High");

           else builder.append("Insurance Category: Highest");

           builder.append("\r\n");

           writer.write(builder.toString());

           writer.flush();

       }

       writer.close();

   }

}

Read more about java programming here:

https://brainly.com/question/18554491

#SPJ1

Answer:

systems used by many providers require customers to share bandwidth with neighbors

Explanation:

One of the disadvantages of cable technology is that systems used by many providers require customers to share bandwidth with neighbors. This ultimately causes many problems since cables would need to be extended to reach every single user that will be sharing the bandwidth. This would mean cables all over the place. Also, it is very difficult to limit the bandwidth per person, meaning that if anyone is using up all of the bandwidth through the cable, the rest of the individuals connected would not have the bandwidth that they need or are paying for.

In the Big Data era, a newly popular unit of data is the petabyte (PB), which is equal to 1015 bytes. Therefore, the correct option is the third option, i.e. 1015 bytes.

A petabyte is a unit of digital data storage, and it is equivalent to one thousand terabytes. In decimal notation, a petabyte is defined as 1015 bytes. Petabytes are frequently utilized in the world of Big Data to express large quantities of data.

A petabyte is a digital storage unit that is used to store data. One petabyte is equivalent to 1,000 terabytes. A petabyte is made up of approximately 1,000,000 gigabytes and 1,000,000,000 megabytes. A petabyte (PB) is a big quantity of digital data that is difficult to comprehend due to its magnitude, but it is a common measurement in the data storage and computing industries.

Learn more about petabyte at

https://brainly.com/question/32225127

#SPJ11

Answer:

The loss of power a signal suffers as it travels from the transmitting computer to a receiving computer is attenuation .

The loss of power a signal suffers as it travels from the transmitting computer to a receiving computer is called "attenuation."

Attenuation refers to the weakening or reduction of a signal's strength as it travels through a medium (such as a cable, air, or fiber optics) over distance. Various factors can contribute to attenuation, including the resistance of the medium, signal dispersion, and interference from external sources.

In summary, the term used to describe the loss of power a signal experiences as it moves from a transmitting computer to a receiving computer is attenuation. This phenomenon is caused by multiple factors, such as the medium's resistance and external interference, which reduce the signal's strength over distance.

To know more about attenuation visit:

https://brainly.com/question/30897635

#SPJ11

When dragging the pointer across a selection in Word, the size of the table is indicated by a highlight box at the top of the grid.

The box shows the number of rows and columns that are being selected as the pointer moves over the cells. Once the desired size of the table is highlighted, the user can release the mouse button to create the table with the selected dimensions. This feature is useful for creating tables with specific sizes quickly and accurately. Additionally, Word provides options to adjust the size of the table after it has been created, such as adding or removing rows and columns or changing the width and height of individual cells.

Find out more about Words

brainly.com/question/14905545

#SPJ4

Best of the web is an example of a manually developed, categorized listing of websites that are used when conducting searches on a narrow topic. This is referred to as a web directory or a subject directory.

What is a web directory?

A web directory or a subject directory is a hand-edited catalog of websites, arranged into categories and subcategories. These catalogs of websites are created manually by human editors and then sorted according to their content. They include links to websites that have been approved based on the particular standards of the directory. When a person visits a web directory and looks for the information they need, they can search for it using keywords or browse through the various categories and subcategories.Web directories are typically used to assist web searchers in locating information on the internet by narrowing down the searches. By visiting the directory, web users can find websites related to their specific topic of interest. One benefit of web directories is that they are often developed by professionals in the area, meaning that web searchers can be confident in the accuracy and relevancy of the results.

Learn more about web here: https://brainly.com/question/28431103

#SPJ11

Answer:

Option B

Explanation:

For an entry level worker in the web and digital communications pathway, a certificate course is only required.

Graduation, post-graduation and doctoral degrees are required for higher roles and research works.

Hence, option B is correct