According to avogadros law, how will the number of molecules in 2 liters of hydrogen gas compare with the number of molecules in 2 liters of oxygen gas at the same temperature and pressure?
A hydrogen will have more molecules in a volume of 2 liters
B oxygen will have more molecules in a volume of 2 liters
C they will have equal number of molecules
D there is no way to tell

The height of a ramp does not directly determine the strength of the frictional force between a book and an object.

The strength of the frictional force between a book and an object is not directly influenced by the height of a ramp. The nature of the surfaces in contact, the force forcing the surfaces together (normal force), and the coefficient of friction are some of the variables that affect the frictional force between two surfaces.

The coefficient of friction between the book and the object plays a major role in determining the strength of the frictional force.

Learn more about frictional force:https://brainly.com/question/30280206

#SPJ1

Answer:

Refer to the picture.

Answer:

it is either d or c

Explanation:

Answer:

im pretty sure its 31

just add up the masses then divide by 3

Answer:

acetone evaporates faster than hexane.

Explanation:

because acetone does nor participate in hydrogen bonding, so it's intermolecular forces are comparatively weaker, and it evaporates most quickly.

Here are the typical differences between each tube in a tube dilution test is; Dilution Factor, Concentration, Volume, and Test Conditions.

In a tube dilution test, different dilutions of a substance or sample are prepared in tubes to determine the effect of the substance on a test organism or reaction.

Each tube contains a different dilution of the substance. The dilution factor represents the ratio of the volume of the original substance to the volume of the diluted substance in each tube. As you move from one tube to another, the dilution factor increases, resulting in a progressively lower concentration of the substance.

The concentration of the substance decreases as you move from tube to tube. The initial tube usually contains the highest concentration of the substance, while subsequent tubes contain progressively lower concentrations.

The volume of the substance being tested varies from tube to tube. Generally, the initial tube contains the highest volume of the undiluted substance, and subsequent tubes contain decreasing volumes due to dilution with a diluent (such as a buffer or solvent).

Each tube may be subjected to different test conditions or parameters, depending on the specific purpose of the tube dilution test.

To know more about dilutions here

https://brainly.com/question/13072017

#SPJ4

Answer:

26,981539 u là khối lượng nguyên tử của AI

Explanation:

Unique properties of water

Water molecules have a bent overall structure, partial positive charges on the hydrogens, partial negative charges on the oxygen, and are polar. This is due to the fact that oxygen is more electronegative than hydrogen, making it more effective at drawing electrons. Excellent solvents include water.

Temperature alters the three states of water, which are solid (frozen), liquid, and gas. Although the interactions of the water molecules change, the molecules themselves do not alter between the phases.

Water quality's physical characteristics

Color: Polluted water may be coloured; pure water is colourless.

Turbidity: Clear, light-unabsorbing water is the opposite of pure water.

Taste and odour: Pure water never has a taste or an odour.

Given their polar nature, water molecules form hydrogen bonds. This gives water its distinctive properties, including polarity, solvency, cohesion, adhesion, high specific heat, and the capacity to act as a buffer. A solute that has dissolved in a solvent creates a homogeneous mixture known as a solution.

To know more about unique properties of water visit:

https://brainly.com/question/19045958

#SPJ1

The correct options are A, C, and D.

The constitutional isomers of octane are: A. 3-ethyl-2-methylpentaneC. 2,2-dimethylpropaneD. 2,3,3-trimethylpentaneThe isomers of a molecule can have different physical and chemical properties from each other. Constitutional isomers, also known as structural isomers, are compounds that have the same molecular formula but differ in how their atoms are arranged.

They can have different physical properties, chemical properties, boiling points, and melting points. Octane has the molecular formula C8H18, which means it has eight carbon atoms and eighteen hydrogen atoms. The possible constitutional isomers of octane are numerous.

The four options given in the question as below: A. 3-ethyl-2-methylpentaneB. 2-methylpropaneC. 2,2-dimethylpropaneD. 2,3,3-trimethylpentaneOut of the given options, 3-ethyl-2-methylpentane, 2,2-dimethylpropane and 2,3,3-trimethylpentane are the constitutional isomers of octane. Therefore, the correct options are A, C, and D. Answer: A, C, and D

To know more about isomers visit:

https://brainly.com/question/32508297

#SPJ11

Answer:

936g/mol

Explanation:

To find the molar mass of a molecule, you find the sum of the molar masses of each atom in the molecule.

This compound has 40 carbon atoms, 60 Hydrogen atoms, 10 Nitrogen atoms, 12 Oxygen atoms, and 2 Sulphur atoms.

The molar mass of:

\((12 \times 40) + (60 \times 1) + (14 \times 10) + (16 \times 12) + (32 \times 2) = 936\)

\({{\boxed{\mathcal{\red{It \: will \: be \: in \: your\: \: text \: book \: see}}}}}\)

The formula of Manganese (II) iodide is MgI₂.

Magnesium is one of the element of the periodic table. The atomic number of Magnesium is 12. The atomic mass of Magnesium is 24. The electronic configuration of magnesium is 1s2 2s2 2p6 3s2. Since, there are two outer electrons in the outermost shell. So, the valancy of magnesium is 2. Last shell in which electron fall is 3. Therefore, it belongs to 3rd period and belongs to 2nd group of the periodic table.

Iodide is one of the element of the periodic table. The atomic number of Iodide is 53. The atomic mass of Iodide is 126. The electronic configuration of iodine is [Kr] 4d10 5s2 5p5. Since, there are two outer electrons in the outermost shell. So, the valancy of Iodine is -1. Last shell in which electron fall is 5. Therefore, it belongs to 5th period and belongs to 17th group of the periodic table.

Thus, we concluded that the formula of Manganese (II) iodide is MgI₂.

learn more about Formulas of compound:

https://brainly.com/question/29240889

#SPJ13

Answer:

3.15×18

56.7

................

Decomposition of hydrogen peroxide has a thermodynamic instability. It decomposes at higher temperatures and concentrations to form water and oxygen. Other compounds, such as transition metals like silver and platinum, can catalyze the decomposition of hydrogen peroxide.

In the absence of a catalyst, the reaction of hydrogen peroxide decomposition is very slow at moderate temperatures. It can be accelerated by raising the temperature, which initiates the thermal decomposition reaction. This reaction can take place in either the liquid or vapour phase.

\(H_{2} O_{2}\) is the chemical formula for hydrogen peroxide. It is a very pale blue liquid that is slightly more viscous than water in its pure form. It is used as an oxidizer, bleaching agent, and antiseptic in water, usually in a dilute solution (3%-6% by weight) for consumer use, and in higher concentrations for industrial use. Concentrated hydrogen peroxide, also known as "high-test peroxide," decomposes explosively when heated and has been used as a rocket propellant.

To learn more about decomposition of hydrogen peroxide, here

https://brainly.com/question/19129412

#SPJ4

The carbonyl carbon in a carboxylic acid gives a 13C signal in the same region as a carbonyl carbon from a ketone or aldehyde in the range of 200 ppm.

The given statement is True.

An organic molecule known as an aldehyde is one in which the carbonyl group is joined to a carbon atom at the end of a carbon chain. A carbonyl group is linked to a carbon atom in the carbon chain to form an organic molecule known as a ketone. The 13C NMR peaks of aldehydes and ketones are easily distinguished and can be found in the 190 to 215 ppm range.

The carbon skeleton itself, not merely the proton bonded to it, is what the 13C NMR is directly about. We can determine how many different carbons or sets of equivalent carbons by counting the signals. We can determine how many hydrogen atoms are linked to each carbon by counting the signals that split.

A C-13 nucleus can be either aligned with or opposed to an external magnetic field because it behaves like a tiny magnet. Once more, with greater energies, the alignment that is in opposition to the field is less stable.

Learn more about 13C NMR:

https://brainly.com/question/17516931

#SPJ4

Answer:

2N

Explanation:

force exerted on the box = 6+3 =9

Net Force = 7

force lost to friction=9-7=2

hence force of friction is 2N

An atom is the smallest unit of an element which retains the chemical properties of the particular element. An ion, on the other hand, is a charged particle that forms when an atom gains or loses electrons.

Subatomic particles include protons, neutrons and electrons.

To find out more about atoms and ions, visit:

https://brainly.com/question/7042615

#SPJ1

Answer:

B.

Explanation:

Lol notes brought everything but B. Up

When alkaline hydrolysis was first invented, people were hired for various roles related to the process and implementation of this technology. Some of the jobs that emerged include Chemical engineers, Technicians and operators, Waste management specialists, Scientists and researchers.

Chemical engineers: These professionals played a crucial role in developing and optimizing the alkaline hydrolysis process. They were responsible for designing the equipment, developing the necessary chemical reactions, and ensuring the efficient operation of the system.

Technicians and operators: Skilled technicians and operators were hired to operate and maintain the alkaline hydrolysis equipment. They were trained to monitor the process parameters, handle the chemicals involved, and ensure the proper functioning of the system.

Waste management specialists: With the introduction of alkaline hydrolysis as a method for disposal of organic waste, specialized professionals in waste management were employed to oversee the proper handling and treatment of the waste materials. They were responsible for implementing safety protocols, managing waste streams, and complying with environmental regulations.

Scientists and researchers: Alkaline hydrolysis required scientific expertise for continuous improvement and innovation. Scientists and researchers were hired to study the process, analyze the results, and explore potential applications in various fields such as biofuel production and chemical synthesis.

Overall, the introduction of alkaline hydrolysis created employment opportunities for professionals in engineering, chemistry, waste management, and research, among others, as this technology gained recognition and adoption.

To know more about hydrolysis , click here, https://brainly.com/question/31132313

#SPJ11

The enzymatic cycle has four steps, and they include the following;

1. The reaction between the Enzyme and Substrate

2. The substrate/enzyme complex formation

3. Catalysis

4. Enzyme releases a product

A small molecule will attach to the enzyme's active site and stop the action. The plants adapt by changing amino acid(s) in the enzyme. They adjust the structure and are continuously active; the small molecule cannot limit this enzyme.

The four steps in an enzyme cycle are;

1. The substrate and enzyme are found in one region. There are times when there is more than one substrate molecule and the enzyme changes.

2. The enzyme will then be trapped on the substrate in the special region called the active site. The combination is called substrate/enzyme complex. The active site will be in a shaped special region for the enzyme, which fits around a substrate.

3. Catalysis will happen when the Substrate changes. It can be broken down or combined with other molecules forming something new. It will break and form chemical bonds; afterward, a product/enzyme complex will occur.

4. The enzyme will release a product. When the enzyme is relaxed, it will return to its original shape and be ready to work on the other substrate molecule.

To learn more about the enzyme, refer;

brainly.com/question/1596855

#SPJ4

Yes, all of the above characteristics apply to an atomic orbital.

Atomic orbitals are defined by the wave function, which describes the probability of the electron being in a certain region of space. They are identified by a unique combination of three quantum numbers, which are the principal quantum number (n), the angular momentum number (l), and the magnetic quantum number (m).

These three quantum numbers give information about the size and shape of the orbital. Atomic orbitals are also a region around the nucleus of an atom where the probability of finding an electron is high.

In addition, they are shells in an atom containing valence electrons and can be identified by a unique combination of four quantum numbers, which are the same three quantum numbers mentioned above plus the spin quantum number (s).

For more questions like Atomic orbital click the link below:

https://brainly.com/question/29561958

#SPJ4

Students who use correct scientific reasoning are Student 1 namely: If the reaction is not allowed to finish, the sodium bicarbonate will not decompose completely, making the final mass higher than the theory.Te corrct amswer is B.

If the sodium bicarbonate is not properly broken down, water and carbon monoxide will not be produced, which can be eliminated to lessen the product's mass. The product will therefore weigh heavier or have a bigger ultimate mass than predicted because of an incomplete reaction.

Given the aforementioned justifications, it is obvious that Student 2 is mistaken in this instance. This is not a scientific explanation in the instance of Student 3 and is merely a wild guess that isn't true in all circumstances.

Learn more about scientific reasoning at brainly.com/question/16981456.

#SPJ4

Answer:

Nickel (I) Phosphate

Explanation:

PO4 is a -3 ion it will need 3 Ni(I) ion, which is -1 ion. Therefore it is Ni3PO4.

In this reaction, the reactant in excess is consumed by 80%. This means that out of the 200 reactants, only 80 were consumed and the rest was left over.

Here, correct answer will be

This is an important calculation to make because it can help to determine how much of the reactant is necessary for the reaction to occur and how much can be left over.

It also helps to determine how efficient the reaction is and how much energy is needed for the reaction to occur. Knowing this information can help to make more efficient reactions and help to save energy and resources.

Know more about reactants here

https://brainly.com/question/17096236#

#SPJ11

The advantages of using high pressure for the reactions are accelerating the rate of reaction and increasing surface area for the reactants.

Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.

There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .

It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.

Learn more about pressure,here:

https://brainly.com/question/14760196

#SPJ9

When an ionic compound dissolves in water, the compound breaks apart into its individual cations and anions. This dissolution occurs due to the attraction between the ions and the partially charged water molecules.

When an ionic compound dissolves in water, it undergoes a process called dissolution. This process involves the separation of the ionic compound into its individual ions, specifically cations and anions. Ionic compounds consist of positively charged ions (cations) and negatively charged ions (anions), held together by strong electrostatic forces of attraction.

When the ionic compound is placed in water, the water molecules surround and interact with the ions. The oxygen atom of the water molecule has a partial negative charge, while the hydrogen atoms have a partial positive charge. These charges allow water molecules to interact with the ions.

The partially negative oxygen atom of the water molecule is attracted to the positively charged cations, while the partially positive hydrogen atoms are attracted to the negatively charged anions. This attraction causes the ionic compound to dissociate, or separate, into its individual ions.

The water molecules effectively surround each ion, forming a hydration shell. This hydration shell stabilizes the ions by shielding their charges from each other, preventing them from coming back together. The hydration of ions also helps to solvate the ions, allowing them to move freely within the water.

The process of dissolution is an essential step in many chemical reactions that occur in aqueous solutions. It allows the ions to disperse evenly throughout the solution, which increases the chances of successful chemical interactions.

In summary,  The resulting hydrated ions are then free to move and participate in various chemical reactions in the solution.

To learn more about ionic compound  click here:

https://brainly.com/question/2687188#

#SPJ11

The color of the phenolphthalein indicator in:

a. acidic solution = colorless

b. basic solution = pink color

The color of phenolphthalein indicator in the acidic solution is the  colorless and  in the basic solution is pink color. The indicator is the substance that gives the visible sign, and a color change, of the presence or the absence of the threshold concentration of the chemical species like as the acid or an alkali in the solution.

In the acid-base titrations, the phenolphthalein is generally used as the  indicator. It will turn the colorless in acidic solutions and gives the pink in basic solutions for this application.

To learn more about phenolphthalein here

https://brainly.com/question/15597198

#SPJ4

Answer:

I think it is Middle amount of Potential Energy

Explanation:

The repulsive interaction comes from the knowledge of the effective electron density function F(r) which satisfies the Poisson equation V'U(r) = F(r). A constant based on the valence electrons of two combining atoms is introduced and assumed to be characteristic for both the states.In quantum mechanics, a repulsive state is an electronic state of a molecule for which there is no minimum in the potential energy. This means that the state is unstable and unbound since the potential energy smoothly decreases with the interatomic distance and the atoms repel one another.hope this helps you have a blessed day

Answer:

I don't now the answer but you can give branaillest to the other person how answered it

Explanation:

Answer:

The answer is 2

Explanation:

There are two energy sublevels in the second principal energy level. These two energy sublevels are 2s and 2p. The energy distribution in an atom is divided into a number of principal energy levels, and the principal energy levels are again divided into four basic energy sublevels.

Answer:

When two or more atoms are chemically joined together, this is called a molecule. In some cases, such as hydrogen and oxygen, the molecule is made entirely of the same atom, such as hydrogen gas (a molecule) is made entirely of two hydrogen atoms. Here, converting molecules to atoms is as simple as dividing by two.

Atoms can join together - they form bonds together - to make MOLECULES. For example, two atoms of hydrogen hook together to form a molecule of hydrogen