An object is moving in a straight line with velocity of 5 m/s due north. The object increases its speed to 13 m/s while still going north. In what direction is the acceleration of this object

As little as 6inches of water can cause tires to slide. So,correct option is B.

As little as 6 inches of water can cause tires to slide. When there is water on the road, it creates a thin layer between the tires and the pavement, reducing the friction that helps tires grip the road.

This condition is known as hydroplaning, and it can cause the driver to lose control of the vehicle. At a depth of 6 inches, hydroplaning becomes a significant risk, making it crucial for drivers to exercise caution and slow down when encountering water-covered roads.

It is important to remember that even small amounts of water can pose a hazard, so it is advisable to drive carefully and maintain proper tire traction in wet conditions.

learn more about hydroplaning here:

https://brainly.com/question/33451097

#SPJ11

A real root of the equation f(x) = x^2 - 2x - 5 = 0, found using the bisection method in five stages, is approximately x = -0.046875. To find a real root of the equation f(x) = x^2 - 2x - 5 = 0 using the bisection method, we can start by identifying an interval [a, b] that contains the root. Let's choose the interval [-3, 0], where f(a) = f(-3) = 4 and f(b) = f(0) = -5. Since f(a) and f(b) have opposite signs, there must be a root within this interval.

Stage 1:

- Start with interval [a, b] = [-3, 0]

- Calculate the midpoint c = (a + b) / 2 = (-3 + 0) / 2 = -1.5

- Evaluate f(c) = (-1.5)^2 - 2(-1.5) - 5 = -0.25

- Since f(c) has the same sign as f(a), replace a with c: [a, b] = [-1.5, 0]

Stage 2:

- Calculate the new midpoint c = (a + b) / 2 = (-1.5 + 0) / 2 = -0.75

- Evaluate f(c) = (-0.75)^2 - 2(-0.75) - 5 = -4.4375

- Since f(c) has the same sign as f(a), replace a with c: [a, b] = [-0.75, 0]

Stage 3:

- Calculate the new midpoint c = (a + b) / 2 = (-0.75 + 0) / 2 = -0.375

- Evaluate f(c) = (-0.375)^2 - 2(-0.375) - 5 = -2.7461

- Since f(c) has the same sign as f(a), replace a with c: [a, b] = [-0.375, 0]

Stage 4:

- Calculate the new midpoint c = (a + b) / 2 = (-0.375 + 0) / 2 = -0.1875

- Evaluate f(c) = (-0.1875)^2 - 2(-0.1875) - 5 = -1.2217

- Since f(c) has the same sign as f(a), replace a with c: [a, b] = [-0.1875, 0]

Stage 5:

- Calculate the new midpoint c = (a + b) / 2 = (-0.1875 + 0) / 2 = -0.09375

- Evaluate f(c) = (-0.09375)^2 - 2(-0.09375) - 5 = -0.6104

- Since f(c) has the same sign as f(a), replace a with c: [a, b] = [-0.09375, 0]

After five stages, the interval [a, b] has become [-0.09375, 0]. Since the interval is small, we can approximate the root as the midpoint of this interval:

Root ≈ (a + b) / 2 = (-0.09375 + 0) / 2 = -0.046875

Therefore, a real root of the equation f(x) = x^2 - 2x - 5 = 0, found using the bisection method in five stages, is approximately x = -0.046875.

Learn more about the bisection method here:

brainly.com/question/27229112

#SPJ11.

Answer:

Inverse relationships are common in nature. In electrostatics, the electrical force between two charged objects is inversely related to the distance of separation between the two objects. Increasing the separation distance between objects decreases the force of attraction or repulsion between the objects.

Explanation:

Two ways to decrease the electric force between two charged objects:

As a result of their electric charge, particles or objects are attracted to or repelled by the Coulomb force, also known as electrostatic force or Coulomb interaction. Charles-Augustin de Coulomb, a French scientist who published the findings of an experimental inquiry into the proper quantitative description of this force in 1785, gave the electric force its name. The electric force is one of the fundamental physical forces.

Positive or negative electric charges that are similar to one another repel one another in a straight line between their centers. Positive and negative charges that are opposite each other are drawn together along a straight line connecting their centers.

Learn more about coulomb force here:

https://brainly.com/question/11141051

#SPJ5

According to Kepler's Third Law, a planet's semi-major axes and orbital periods are directly inversely related in size. Correct otion C.

According to Kepler's Third Law, as an orbital radius grows, so does the period that a planet takes to orbit the Sun. Mercury, the innermost planet, orbits the Sun in just 88 days, as a result. Saturn needs 10,759 days to complete the same task as the earth, but the earth needs 365 days. Although though Isaac Newton's theory of universal gravitation, which clarifies the unidentified force behind Kepler's Third Law, was derived from Kepler's three laws, despite the fact that Kepler hadn't known about gravity when he developed them, they were crucial to the development of that theory. For a better knowledge of our solar system, Kepler and his theories were essential.

Learn more about Kepler's Third Law here:

https://brainly.com/question/1608361

#SPJ4

 The region of temperature-induced gradients in the ocean that is responsible for the formation of internal waves is called the thermocline. It is typically found at an approximate depth of 200 to 1000 meters in the ocean.

The thermocline is a layer within the ocean where there is a rapid change in temperature with depth. It forms due to the variation in solar heating and mixing processes in the ocean. As sunlight penetrates the upper layers of the ocean, it warms the surface waters. However, below the surface layer, the temperature begins to decrease with depth. This temperature gradient creates a region of rapid change known as the thermocline.

The thermocline acts as a barrier between the warm surface waters and the colder, deeper waters of the ocean. It is characterized by a steep temperature gradient, where the temperature can decrease by several degrees Celsius per meter of depth. This density gradient between the surface waters and the deeper waters is crucial for the formation of internal waves.

Internal waves are waves that occur within the body of water and are distinct from surface waves. They are generated by the interaction of the ocean currents with the density variations in the thermocline. As the internal waves propagate, they transport energy and momentum throughout the ocean, influencing ocean circulation patterns and mixing processes.

The depth of the thermocline can vary depending on factors such as location, season, and oceanic conditions. On average, it is found at depths ranging from approximately 200 to 1000 meters. However, in certain regions, such as areas of upwelling or high latitudes, the thermocline may be shallower, while in other regions, such as tropical areas, it can extend deeper into the ocean. The thermocline plays a vital role in ocean dynamics and has significant implications for marine ecosystems and climate systems.

To learn more about thermocline, click here: https://brainly.com/question/17258307

#SPJ11

Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).

Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.

The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:

weight = mass x acceleration due to gravity.

we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.

Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).

Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.

The resistance is the property of the resistors that helps to determine the amount of current flowing through the circuit with the given volatge source by the ohm's law,

where I is the current, V is the volatge, R is the resistance,

On the other hand, to control the flow of current in the circuit, resistor are connected. As the resistor decrease the value of current depending upon the value of resistance of the resistor.

Hence, 1st option ( Resistance, resistor) is the correct answer.

Answer:

Explanation:

For every action (or force), there is an equal and opposite action (or force).

Answer:

If you try to lift up a weight in a swimming pool and then try to lift the same weight on the edge of the pool, it feels much lighter in the water.

This was supposed to have been first explained by the Greek scientist Archimedes. He said that the water gives an upward force or upthrust on any object in it.

You can weigh an object in air and then in water and actually work out the upthrust, it is the difference between the two readings. For this reason the upthrust is often called the loss in weight of the object.

There are roughly \(10^{26\) photons in a beam of light with an energy of 100 J and a wavelength of 300 nm.

To calculate the approximate number of photons in a beam of light, we can use the equation relating energy (E) to the frequency (f) or wavelength (λ) of a photon:

E = hf = hc/λ

Where:

Given the energy of the beam of light (Ebeam = 100 J) and the wavelength (λ = 300 nm = 300 x \(10^{-9\) m), we can rearrange the equation to solve for the number of photons (N):

N = Ebeam / E

Let's calculate the number of photons using the given values:

E = hc / λ

 ≈ (\(10^{-33\) J.s) * (3 x \(10^8\) m/s) / (300 x \(10^{-9\) m)

≈ \(10^{-33\) J.s * \(10^9\) / 3

≈ \(10^{-24\) J

N = Ebeam / E

   = 100 J /  \(10^{-24\) J

  ≈ \(10^{26\) photons

Therefore, there are roughly \(10^{26\) photons in a beam of light with an energy of 100 J and a wavelength of 300 nm.

More on light energy can be found here: https://brainly.com/question/32493476

#SPJ4

The femur can withstand a compression of about 4.1945 mm before breaking.

We can use the formula for compressive stress to calculate the amount of compression that the femur bone can withstand before breaking:

Stress = Force / Area

where the force is the force applied to the bone and the area is the cross-sectional area of the bone.

To find the cross-sectional area of the femur bone, we can assume that it has a circular cross-section and use the formula:

Area = πr^2

where r is the radius of the cross-section.

Since the length of the femur bone is 0.5 m, we can assume that the cross-sectional area remains constant along its length.

Let's assume that the force required to break the bone is the maximum compressive stress that it can withstand, which is 1.51 × 10^8 Pa. We can rearrange the stress formula to solve for the force.

We can use the equation for strain under compression:

strain = stress / Young's modulus

where stress is the maximum stress the bone can withstand before breaking, and Young's modulus is a measure of the stiffness of the material. The strain is a measure of how much the bone compresses under stress.

To find the compression distance, we can rearrange this equation to solve for the compression distance:

compression distance = strain x original length

where the original length is the length of the bone before compression

Substituting the given values:

stress = 1.51 × 10^8 Pa

Young's modulus = 1.8 × 10^10 Pa

original length = 0.5 m

First, we can calculate the strain:

strain = stress / Young's modulus = (1.51 × 10^8 Pa) / (1.8 × 10^10 Pa) ≈ 0.008389

Next, we can calculate the compression distance:

compression distance = strain x original length = (0.008389) x (0.5 m) = 0.0041945 m

Finally, we can convert the result to millimeters:

compression distance = 0.0041945 m x (1000 mm/m) = 4.1945 mm

Therefore, the femur can withstand a compression of about 4.1945 mm before breaking using Stress = Force / Area

Learn more about compression below.

https://brainly.com/question/17266589

#SPJ1

Answer:

It's C) color

Explanation:

--------

Answer:

20m/s2.isjsjsjjsjsisisiww

Answer:

yes

Explanation:

there are other quantities that are dimensionless, but have a unit.

For example, radian is the unit for an angle. But it is dimensionless because it is defined to be the ratio of two lengths.,

a dimensionless quantity will always be independent of the base units — meter, second, kilograms, kelvin, candela, moles, ampere.

Other examples:

1. Mass fraction

2.Mole fraction

both have unit (kg/kg)

Answer:

A quantity that has dimensions must have units. Yes a quantity have units but still be dimensionless for example,unit of angle is radian ,but it is a dimensionless quantity. A dimensionless quantity may have unit. ... A unitless quantity never has a non-zero dimension.

I hope it's helpful!

Answer:

stress tension tensile strength

Explanation:

The maximum stress which a material can withstand when it is pulled apart is its: stress tension tensile strength.

Answer:

Explanation:

Time taken by jogger to travel the distance to finishing line = 2.1 / 7.3

= .28767 hr

Bird will keep flying for this time period

distance covered by bird = speed x time

= 29.2 x .28767 km

= 8.4 km .

The surface area of the spherical shell is 4πa^2.

The equation of the spherical shell is given by (z/a)^2 + (x/a)^2 + (y/a)^2 = 1, where a is the radius of the shell. We want to find the surface area of this shell.

To calculate the surface area of a sphere, we use the formula:

A = 4πr^2

where r is the radius of the sphere. However, in this case, we have a spherical shell, not a solid sphere. The surface area of a spherical shell is given by:

A = 4πr^2 - 4πr1^2

where r is the outer radius of the shell and r1 is the inner radius of the shell.

From the equation of the shell, we can see that the outer radius is a and the inner radius is 0, since the shell starts at z = 0. Thus, we have:

r = a

r1 = 0

Substituting these values into the surface area formula, we get:

A = 4πa^2 - 4π(0)^2

= 4πa^2

Therefore, the surface area of the spherical shell is 4πa^2.

Learn more about surface area

brainly.com/question/29298005

#SPJ11

Answer:

D. chemical control

Explanation:

The reason for using chemical control as last resort in IPM is:

1) Impact is very high

2) The response is immediate

D=44.13, Horizontal velocity is unimportant. The time it takes the cannon ball to fall to the ground is the key to determining the height of the cliff. where  that cannon is present.

The speed of any projectile travelling along a Horizontal velocity is known as the horizontal velocity. When a particle or object is launched into the air at an angle other than 90 degrees, it moves along the trajectory path and changes the shape of the curve to a parabolic one.

the speed at which velocity changes over time. Due to its magnitude and direction, acceleration is a vector quantity. The first derivative of velocity with respect to time or the second derivative of position with respect to time are further examples. This is called acceleration.

Distance to the ground is d = 1/2gt^2,

where g is the acceleration rate of gravity (9.80665 m/s^2)

and t = 3 secs.

d = .5×9.80665×9 = 44.13 m.

Learn more about horizontal velocity here

https://brainly.com/question/18084516

#SPJ4

Answer: D=44.13, Vertical velocity is not significant. The height of the cliff can be calculated using the time it takes the cannonball to hit the earth. where there is that gun.

Explanation: The horizontal velocity is the rate at which any projectile is moving along a plane. A particle or object that is propelled into the air at an angle other than 90 degrees goes along the trajectory line and transforms the curve's shape into a parabolic one.

the rate of change of velocity over time. Acceleration is a vector number because of its size and directional characteristics. Additional examples are the second derivative of location with respect to time or the first derivative of velocity with respect to time. Here is

Distance to the ground is d = 1/2gt^2,

where g is the acceleration rate of gravity (9.80665 m/s^2)

and t = 3 secs.

d = .5×9.80665×9 = 44.13 m

To know more about horizontal velocity click here

https://brainly.com/question/29450937?referrer=searchResults

#SPJ4

As, orbital period of jupiter is equivalent to 12 years.

So, monitoring sun for 50 years will give periodic peaks in intensity.

The power transferred per unit area is referred to in physics as the intensity or flux of radiant energy, and the area is measured on a plane perpendicular to the direction of the energy's transmission. Watts per square meter are the base units of the SI system. The term "intensity" is most often used to describe the average power transfer during a wave's duration, such as sound waves or electromagnetic waves like light or radio waves. There are many different energy exchange scenarios that can be described using the word intensity. One could figure out how much kinetic energy each drop of water from a sprinkler is carrying, for instance.

To learn more about intensity ,visit:

https://brainly.com/question/17583145

#SPJ4

The number of oscillations of the toy in a second is 1.25.

The given parameter:

The frequency of an object is calculated as follows;

\(f = \frac{n}{t} \\\\\)

where;

The number of oscillations of the toy in a second is calculated as follows;

\(1.25 = \frac{n}{1} \\\\n = 1.25\)

Learn more about frequency here: https://brainly.com/question/10728818

Answer:

A

Explanation:

Answer:

balanced hurry up fam

gurry hurry hurry

Answer:

The mass of the sign is 44.5 kg.

Explanation:

Given that,

Force acting on the sign, F = 445 N

We need to find the mass of the sign.

Net force acting on it is given by :

F = mg

Where g is the acceleration due to gravity

\(m=\dfrac{F}{g}\\\\m=\dfrac{445\ N}{10\ m/s^2}\\\\m=44.5\ kg\)

So, the mass of the sign is 44.5 kg.

The average angular speed of the 2.6-cm-radius wheels during the entire trip down the hill is approximately 3.82 rad/s.


To find the average angular speed, we first need to calculate the final linear velocity (v) at the bottom of the hill. We can use the equation v^2 = u^2 + 2as, where u is the initial velocity (1.8 m/s), a is acceleration (0.35 m/s²), and s is the distance (85 m). Solving for v, we get v ≈ 7.33 m/s.

Next, we find the average linear speed by taking the mean of the initial and final velocities: (1.8 + 7.33)/2 ≈ 4.565 m/s.

Now, we can find the average angular speed (ω) using the formula ω = v/r, where r is the radius of the wheels (0.026 m). Therefore, ω ≈ 4.565 / 0.026 ≈ 3.82 rad/s.

Learn more about angular speed here:

https://brainly.com/question/14663644

#SPJ11

The initial vertical acceleration of the assembly with all five engines operating is approximately 14.51 m/s².

The total mass of the assembly (m) = 2.04 × \(10^6\) kg

Thrust of each booster rocket (Fb) = 11.80 × \(10^6\)N

Thrust of each main engine (Fm) = 2.00 × \(10^6\) N

The total thrust produced by the two booster rockets is:

\(Fb_{total\) = 2 × Fb = 2 × 11.80 × \(10^6\) N = 23.60 × \(10^6\) N

The total thrust produced by the three main engines is:

\(Fm_{total\)= 3 × Fm = 3 × 2.00 × \(10^6\) N = 6.00 × \(10^6\) N

The net force acting on the assembly is the sum of the thrusts:

\(F_{net\) = \(Fb_{total\) +\(Fm_{total\) = 23.60 × \(10^6\) N + 6.00 × \(10^6\) N = 29.60 × \(10^6\) N

Using Newton's second law, we can calculate the acceleration (a):

\(F_{net\) = m × a

29.60 × \(10^6\) N = 2.04 × \(10^6\) kg × a

a = 29.60 × \(10^6\) N / 2.04 × \(10^6\) kg

a ≈ 14.51 m/s²

Thrust is a fundamental concept in physics and engineering that refers to the force exerted by a propulsion system to move an object forward. It is commonly associated with the propulsion of vehicles such as aircraft, rockets, and ships. Thrust is generated through the expulsion of a high-speed jet or exhaust gases in the opposite direction to the desired motion.

Thrust is produced by the combustion of fuel and air within the engine, resulting in the rapid expulsion of hot gases. These gases pass through a nozzle, where they are accelerated to high speeds and expelled rearward. According to Newton's third law of motion, for every action, there is an equal and opposite reaction.

To know more about Thrust refer to-

brainly.com/question/26712174

#SPJ4

A car moving to the right will still go to the right when the braking force is applied is about negative acceleration.

Any procedure where the velocity varies is referred to as acceleration. There are only two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a speed and a direction.

When an item experiences negative acceleration, its velocity changes in a negative direction, which can suggest that it is moving either slower or faster. In physics, a change in an object's velocity is referred to as "acceleration."

Since this change in velocity is a vector quantity, it denotes both magnitude and direction. Positive velocity is also a vector, and experiencing negative acceleration means that something is slowing down.

Therefore, A car moving to the right will still go to the right when the braking force is applied is about negative acceleration.

To learn more about acceleration, refer to the link:

https://brainly.com/question/12550364

#SPJ1