C. Move the light bulb back and forth. No matter where the light bulb is located on the central axis, what is always true about size of the image?

If the energy input to an electric motor is 560J/s and 170J/s of energy is transferred to thermal energy when in use, the efficiency of the motor would be

It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.

As given in the problem If the energy input to an electric motor is 560J/s and 170J/s of energy is transferred to thermal energy when in use,

Useful energy = electrical energy - thermal energy lost

                        =560 J/s - 170 J/s

                        = 390 J/s

the efficiency of the motor = useful energy /electrical energy ×100

                                            = 390/560 ×100

                                            =69.64%

Thus, the efficiency of the motor would be 69.64%.

Learn more about thermal energy from here,

brainly.com/question/3022807

#SPJ1

Jaipal can calculate for the voltage (V) in the circuit

Ohm's laws states as follow:

V = IR

Where:

V is the voltage (unit V)

I is the current (unit A)

R. Is the resistance (unit ohm)

Current (I) = 1.2 A

Resistance (R) = 24 ohms

From the above we can see that the voltage is missing.

Thus, using ohm's law, Jaipal can calculate for the voltage (V) in the circuit

Learn more: https://brainly.com/question/11288970

Jaipal can calculate the Voltage in the circuit from the current and resistance he measured.

The given parameters:

According to Ohms law, the voltage across a conductor is directly proportional to the current flowing the conductor.

V = IR

where;

V = 1.2 x 24

V = 28.8 V

Thus, Jaipal can calculate the Voltage in the circuit from the current and resistance he measured.

Learn more about Ohms law here: https://brainly.com/question/18967420

Answer:

Explanation:

perfect drawing

The speed of the penny after 2.5 seconds is 24.5 m/s.

What is speed?

Speed is a scalar quantity that refers to "how fast an object is moving." It is the rate at which an object changes its position, and it is measured in units of distance per unit of time (such as meters per second or miles per hour). Speed is related to the distance traveled by an object and the time it takes to travel that distance, and it can be calculated by dividing the distance traveled by the time it took to travel that distance.

The speed of an object in free fall can be calculated using the equation:

v = g * t

where v is the velocity, g is the acceleration due to gravity (approximately 9.8 m/s^2 on the Earth's surface) and t is the time elapsed.

In this scenario, the penny is dropped off the top of the Statue of Liberty, which is 93 m tall, and we want to find the speed of the penny after 2.5 seconds.

So, we can substitute the values in the equation:

v = 9.8 m/s^2 * 2.5 s = 24.5 m/s

Therefore, the speed of the penny after 2.5 seconds is 24.5 m/s (assuming no air resistance).

To learn more about speed:

https://brainly.com/question/26046491

#SPJ1

The density of matter in a lead nucleus is 2.82 x 10¹⁷ kg/m³.

Lead nucleus is composed of protons and neutrons. The density of a nucleus is the mass of a nucleus divided by the volume occupied by the nucleus. The volume of a nucleus can be determined using the formula

(4/3)πr³,

where r is the radius of the nucleus. As the diameter of a lead nucleus is given as 14.2 fm, the radius of a nucleus can be calculated as follows:

radius = diameter/2

= 14.2 fm/2

= 7.1 fm

Hence, the volume of a lead nucleus can be calculated as:

(4/3)πr³ = (4/3)π(7.1 fm)³

= 1.57 x 10⁻⁴ fm³

As the mass of a lead nucleus is 3.15 x 10⁻²⁵ kg, the density of matter in a lead nucleus can be calculated as follows:

Density = Mass/Volume

= 3.15 x 10⁻²⁵ kg/1.57 x 10⁻⁴ fm³

= 2.82 x 10¹⁷ kg/m³

The density of matter in a lead nucleus is 2.82 x 10¹⁷ kg/m³.

To know more about density visit:

brainly.com/question/22124707

#SPJ11

Answer:

No

Explanation:

Only a few of alpha beta and gamma radiation can treat cancer

The given statement is true because when the Galileo spacecraft arrived at Jupiter on December 7, 1995, Jupiter was almost in conjunction with the sun.

The Galileo spacecraft began orbiting Jupiter in December 1995 and concluded its mission in September 2003. Galileo was the first spacecraft to flyby an asteroid and to orbit Jupiter.

Galileo took many photos of Jupiter and its moons, as well as collected data on its atmosphere and magnetic field. It also discovered a new moon called Amalthea.

The Galileo spacecraft took a long time to travel to Jupiter because it utilized several gravity assists from Venus and Earth to conserve fuel.

Despite this, the Galileo spacecraft discovered a lot of fascinating information about Jupiter and its moons. It discovered that Europa, one of Jupiter's moons, has a subsurface ocean that could harbor life. It also discovered that the surface of Io, another of Jupiter's moons, is the most geologically active place in the solar system.In summary, the

For more similar questions on gailelio

brainly.com/question/21020832

#SPJ11

Answer:

Place the object in the graduated cylinder, and record the resulting water volume as "b." Subtract the volume of the water alone from the volume of the water plus the object. For instance, if "b" was 50 milliliters and "a" was 25 milliliters, the volume of the irregularly shaped object would be 25 milliliters.

The volume of the irregular solid can be measured using a graduated cylinder having a known volume of water.

A solid is irregular if it does not fit into any of the known shapes. It is possible to determine the volume of these objects using the displacement method.

In this method, a graduated cylinder containing a known volume of water is used. The irregular solid is now introduced into the cylinder and the displacement of the water is noted.

The displacement of the water is obtained as;

Final volume of water - Initial volume of water. The amount of water displaced is equal to the volume of the irregular solid.

Learn more: https://brainly.com/question/16610815

Answer:

one object speeds up and the other slows down

Explanation-

they will have unequal accelerations as a result of the contact force that results during the collision

Answer:

one object speeds up and the other slows down

Answer:

The quadratic function models the path of the rocket. When we substitute an x value, we can determine the height in feet of the rocket.

To determine the height it was launched from, we would look at the y-intercept. This represents the starting value, as time = 0 in this point (cannot have negative time).

To determine how far the rocket traveled, we would look at the positive x-intercept of the expression. At this point, height = 0, so we can see the distance from start to finish of the rocket.

To determine the greatest height achieve, we would look at the vertex of the parabola generated from the given function. Using (-b/a, f(-b/a)), we can determine the greatest height achieved.

Answer: left side

Explanation:

Given

Block of wood is pushed to the right

As friction always resist the motion, it must be acting towards the left side to stop the block

The focal length of the contact lens is approximately 26.4 cm

The focal length of the lens can be calculated using the lens maker's formula. For a thin lens, this formula is given by:

\(\frac{1}{f} = (n-1)(\frac{1}{R1}-\frac{1}{R2} )\)

Where f is the focal length of the lens, n is the refractive index of the material of the lens, R1 is the radius of curvature of the first surface of the lens and R2 is the radius of curvature of the second surface of the lens.

Plugging in the given values, we get:

\(\frac{1}{f} = (1.52 - 1)(\frac{1}{0.0207}-\frac{1}{0.0252} )\)

Simplifying this expression, we get:

1/f = 37.8 m⁻¹

Solving for f, we get:

f = 0.0264 m = 26.4 cm

As a result, the contact lens's focal length is roughly 26.4 cm.

To know more about the Contact lens, here

https://brainly.com/question/28047549

#SPJ4

Answer:

Amplitude

The amplitude ( ) of a wave is the distance from the centre line (or the still position) to the top of a crest or to the bottom of a trough .

Explanation:

Hope it helps

The distance traveled by a wave crest in a given time is defined as: D. speed.

A wave can be defined as a disturbance in a medium that progressively transport energy from a source to another location, especially without the transportation of matter.

Some examples of the characteristics of a wave include the following:

In Science, speed refers to the distance traveled by a wave crest in a given time.

Read more on wave here: https://brainly.com/question/19250621

Answer: I hope you find it useful

Explanation: Group 2 elements have two valence electrons. The two valence electrons are easily lost in the formation of chemical bonds. Once the two electrons are lost, the atom then has a full outer shell and is therefore more stable.

so,  if an atom has valency 2 , then it means that the atom can combine with 2 other atoms .

100 degrees Fahrenheit is equivalent to 37.78 degrees Celsius when rounded to two significant figures.

+To convert 100 degrees Fahrenheit to Celsius, we can use the formula:

Celsius = (Fahrenheit - 32) × 5/9

Plugging in the value, we get:

Celsius = (100 - 32) × 5/9 = 68 × 5/9 = 37.78°C (rounded to two significant figures)

Therefore, 100 degrees Fahrenheit is equivalent to 37.78 degrees Celsius when rounded to two significant figures.

learn more about Fahrenheit here

https://brainly.com/question/30391112

#SPJ11

Answer:

Bar graph

Explanation:

each day collects data so a bar graph would work.

Answer:

Bar graph would work :)

Answer:

A. 25.08 s

B. 3082.53 m

C. 3×10⁵ m/s²

Explanation:

A. Determination of the time.

This can be obtained as illustrated below:

Acceleration (a) = –9.8 m/s²

Initial velocity (u) = 245.8 m/s

Final velocity (v) = 0 m/s

Time (t) =.?

v = u + at

0 = 245.8 + (–9.8 × t)

0 = 245.8 – 9.8t

Collect like terms

0 – 245.8 = – 9.8t

– 245.8 = – 9.8t

Divide both side by –9.8

t = –245.8 / –9.8

t = 25.08 s

Therefore, it will take 25.08 s for the car to come to a complete stop.

B. Determination of the distance travelled by the car.

Acceleration (a) = –9.8 m/s²

Initial velocity (u) = 245.8 m/s

Final velocity (v) = 0 m/s

Distance (s) =?

v² = u² + 2as

0² = 245.8² + (2 × –9.8 × s)

0 = 60417.64 – 19.6s

Collect like terms

0 – 60417.64 = – 19.6s

– 60417.64 = – 19.6s

Divide both side by –19.6

s = –60417.64 / –19.6

s = 3082.53 m

Thus, the car travelled a distance of 3082.53 m before stopping completely.

C. Determination of the acceleration of the object.

Initial velocity (u) = 0 m/s

Final velocity (v) = 600 m/s

Distance (s) = 0.6 m

Acceleration (a) =?

v² = u² + 2as

600² = 0² + (2 × a × 0.6)

360000 = 0 + 1.2a

360000 = 1.2a

Divide both side by 1.2

a = 360000 / 1.2

a = 300000 = 3×10⁵ m/s²

The state of depolarization of a neuron is represented by option d) +30 mV to -70 mV.

A neuron at rest has a resting membrane potential typically around -70 mV, which is maintained by the balance of ion concentrations across the cell membrane. Depolarization occurs when there is a temporary shift in the membrane potential towards a more positive value.

Option d) represents depolarization because it describes a change in the membrane potential from the resting potential of -70 mV to a more positive value of +30 mV and then back to the resting potential of -70 mV. This change in potential is characteristic of depolarization.

Option a) (-70 mV) represents the resting membrane potential, while options b) (-70 mV to +30 mV) and c) (-70 mV to -85 mV) do not accurately describe the state of depolarization, as they involve changes that move away from the resting potential rather than towards a positive value.

To know more about current please visit:

https://brainly.com/question/15141911

#SPJ11

The momentum of block A is calculated by multiplying its mass (2 kg) with its velocity (50 m/s). Therefore, the momentum of block A is 100 kg·m/s.

Momentum is a fundamental concept in physics that quantifies the motion of an object. It is defined as the product of an object's mass and its velocity. In this case, block A has a mass of 2 kg and is moving along the positive x-axis with a speed of 50 m/s. To find the momentum, we multiply the mass and velocity: 2 kg * 50 m/s = 100 kg·m/s.

Momentum represents the quantity of motion possessed by an object and accounts for both its mass and how fast it is moving. The larger the mass or velocity, the greater the momentum. When considering momentum, direction is also crucial, as it is a vector quantity. In this scenario, since the block is moving along the positive x-axis, the momentum is positive.

Learn more about momentum Momentum

brainly.com/question/30677308

#SPJ11

3. An electronics company is manufacturing circuit boards.They want to use minimum wire to connect the pins in a way that there are exactly two connected components of any size.

The wire needed to connect each pair of pins is given by the distance between them. How should they arrange the pins to minimize the total length of wire needed?

To minimize the total length of wire needed, the electronics company can use a specific arrangement of pins known as a "Minimum Spanning Tree" (MST). A Minimum Spanning Tree is a connected subgraph of the original circuit board graph that includes all the pins while minimizing the total length of the edges (wires) used.

The company can follow these steps to determine the optimal pin arrangement:

1. Create a graph representation of the circuit board, where each pin is represented by a vertex and the distance between two pins is represented by the weight of the edge connecting them.2. Apply a suitable algorithm for finding the Minimum Spanning Tree of the graph, such as Kruskal's algorithm or Prim's algorithm.

3. The resulting Minimum Spanning Tree will provide the arrangement of pins that minimizes the total length of wire needed while ensuring that there are exactly two connected components of any size.

By using this approach, the electronics company can achieve an efficient and optimized wiring configuration for their circuit boards.

Learn more about  circuit board here:

https://brainly.com/question/13102522  

#SPJ11

Answer:

Dorsal side:B

Ventral side:D

Anterior end:A

Posterior end:C

Explanation:

The four regions of the earthworm are, A is the anterior end,B is the dorsal side, C is the posterior end, and D is the ventral side.

Earthworms are common soil dwellers who are both safe and useful. Earthworms help plants flourish by collapsing dead and decaying organic debris into rich humus soil.

They also aerate the soil and enhance flow by digging small canals and holes.

The four regions of the earthworm are;

A is the Anterior end

B is the Dorsal side

C is the Posterior end

D is the Ventral side

Hence all the regions are clearly defined with the help of digrame.

To learn more about the earthworms refer to the link;

https://brainly.com/question/20992190

The velocity of the ion released from rest and accelerated through a potential difference of 152V is 6.34 × 10^5m/s.

The electric potential difference is a scalar quantity that measures the energy required per unit of electric charge to transfer the charge from one point to another. The electric potential difference between two points in an electric circuit determines the direction and magnitude of the electric current that flows between those two points. A lithium-ion containing three protons and four neutrons has a mass of 1.16 × 10-26 kg. The ion is released from rest and accelerates as it moves through a potential difference of 152 V.

The change in electric potential energy of an object is equal to the product of the charge and the potential difference across two points. The formula to calculate the velocity of the ion released from rest and accelerated through a potential difference of 152V is:

v = √(2qV/m) where q is the charge of the ion, V is the potential difference, and m is the mass of the ion.

Substituting the values in the formula, we get:

v = √(2 × 1.6 × 10-19 C × 152 V/1.16 × 10-26 kg)v = 6.34 × 10^5m/s

Therefore, the velocity of the ion released from rest and accelerated through a potential difference of 152V is 6.34 × 10^5m/s.

Learn more about potential difference:

https://brainly.com/question/23716417

#SPJ11

The modulus of elasticity, E, is a measure of a material's stiffness and ability to resist deformation when a force is applied. It is defined as the ratio of stress to strain within the elastic range of the material. In other words, it describes how much a material will stretch or compress under a given force.

The modulus of elasticity is important because it allows engineers to predict how materials will behave under different conditions, such as temperature changes, loading conditions, and other factors. It also helps to determine the maximum load a material can withstand before it starts to deform or break.

In detail, the modulus of elasticity is a fundamental property of a material that describes its ability to resist deformation when subjected to external forces. It is calculated by measuring the stress and strain of the material and using the equation E = σ/ε, where σ is stress and ε is strain.

The modulus of elasticity is important in many areas of engineering, such as structural design, materials science, and mechanics. It helps to ensure that structures and materials are designed and tested to withstand the loads and stresses they will be subjected to, and it provides a basis for comparing different materials and choosing the best one for a particular application.

In summary, the modulus of elasticity, E, is a material property that describes its stiffness and resistance to deformation. It is correctly determined using Hooke's Law and is crucial for predicting the mechanical behavior of materials when subjected to stress.

Learn more about Hooke's Law here:

brainly.com/question/29126957

#SPJ11

The total charge of 1000 electrons is -1.6 x 10⁻¹⁶ Coulombs, calculated by multiplying the charge of one electron (-1.6 x 10⁻¹⁹ C) by 1000.

The charge of an electron is -1.6x10⁻¹⁹ coulombs. In this problem, we are asked to find the charge of 1000 electrons. We can start by finding the total charge of one electron and then multiply it by 1000. The charge of one electron is -1.6x10⁻¹⁹ coulombs,

so we can multiply this value by 1000 to find the total charge of 1000 electrons.

(-1.6x10⁻¹⁹ C/electron) x 1000 electrons = -1.6x10⁻¹⁶ coulombs

Therefore, the total charge of 1000 electrons is -1.6x10⁻¹⁶ coulombs. This means that if 1000 electrons were added to a system, the total charge of that system would decrease by -1.6x10⁻¹⁶ coulombs due to the negative charge of the electrons.

To know more about electrons:

https://brainly.com/question/12001116

#SPJ4

ANSWER:

The two movements the turning of the top and the movement of the Earth appear in rotating bodies and are the basis of the gyroscope.

STEP-BY-STEP EXPLANATION:

Depending on whether the top is launched, vertical or inclined, two movements are obtained: the sleeping top or the top that, in addition to turning on itself, describes a circumference, as if it were the Earth around the sun. In the sleeping top, the axis of rotation is perpendicular to the plane (ground) on which you dance. If the top is perfectly symmetrical, its center of gravity must be located at an interior point through which the virtual axis of rotation passes. But, because the top, by mass or construction, is not totally symmetrical, as it loses speed, its axis of rotation tilts and begins to rotate, describing a cone, whose vertex is the tip of the top.

In conclusion, the two movements the turning of the top and the movement of the Earth appear in rotating bodies and are the basis of the gyroscope.

Answer:

When sunlight strikes a solar panel what form of energy is transformed to?

Solar radiation may be converted directly into electricity by solar cells (photovoltaic cells). In such cells, a small electric voltage is generated when light strikes the junction between a metal and a semiconductor (such as silicon) or the junction between two different semiconductors.

Explanation:

Answer:

True

Explanation:

Mitosis is the process of cell division that produces two identical daughter cells. Occasionally mutations can occur during DNA replication or the other stages of mitosis. However, cells have mechanisms for DNA repair that can correct these mutations, ensuring the integrity of the genetic material.

A windmill converts the mechanical energy of wind into electrical energy. produced by a generator. Responses.

That mechanical energy of the wind is converted into electrical energy by a wind turbine Its kinetic energy of the a flowing fluid—in this case, air—is transformed into rotary motion by a turbine.A wind turbine's blades move or rotate when the wind blows past them.

The kinetic energy of the wind is transformed into mechanical power by wind turbines.This mechanical energy can be used to particular activities (such pumping water or grinding grain) or can be transformed into electricity by the a generator.

To know more about electrical energy visit:

https://brainly.com/question/16182853

#SPJ4

A mechanism is what is responsible for any action or reaction. Machines are based on the idea of transmitting forces through a series of predetermined motions. These related concepts are the basis of dynamic movement.

Answer:

Explanation:

earth rotates and moves around the sun and around its axis to give seasons and day and night .Earth is located in one of the spiral arms of the Milky Way (called the Orion Arm) which lies about two-thirds of the way out from the center of the Galaxy. Here we are part of the Solar System - a group of eight planets, as well as numerous comets and asteroids and dwarf planets which orbit the Sun.