for the following surface, what is the minimum number of area vectors would you need to fully describe the area?

1.47  is the coefficient of static friction between a mass of 0.75kg and a horizontal surface

m=0.75 KG

g=9.8 M/S^2

N=5 N

F=µN

µ=F/N

µ=mg/N

µ=0.75×9.8÷5

µ=1.47

We are physically surrounded with friction. An object moving along a path is resisted by a force known as static friction. Lastly, use an easy example to comprehend it. Think about the activity we perform frequently called walking. We are constantly in contact with the floor while we work. Motion presses against the ground as we move it backward, and we then advance our feet.

One key concept to be aware of in order to minimize friction is the fact that it operates in the opposite direction from relative motion. This phenomena may be useful for reducing the speed of the action until it eventually comes to a stop.

To know more about   static friction visit : brainly.com/question/13000653

#SPJ9

The linear expansion of the metal is 0.000012 K⁻¹

The linear expansion of the metal rod is given by

ΔL = L₀αΔT

where,

ΔL = 0.090 cm is the linear expansion

L₀ = 80 cm is the initial length of the rod

α   is the linear expansivity

ΔT = 93.6°C is the increase in temperature

By re-arranging the equation, we find the linear expansivity:

α = ΔL÷L₀ΔT = 0.090cm ÷ 80cm ×93.6K = 0.000012 K⁻¹

Temperature is the measure of hotness or coldness expressed in terms of any of several scales, together with Fahrenheit and Celsius. Temperature suggests the course in which warmness energy will spontaneously go with the flow—i.e., from a warmer body (one at a better temperature) to a less warm frame (one at a decrease temperature).

Body temperature is an early caution signal of contamination. Fever is one of the frame's first reactions to infection and is a commonplace symptom in lots of illnesses. Tracking your body temperature, can help locate disorder or contamination early.

Learn more about Temperature here:-https://brainly.com/question/25677592

#SPJ9

Answer:the answer is “A book sitting on a high shelf” :)

Explanation:

The potential difference between points A and B in the circuit is 12 V.

To find the potential difference between points A and B in the given circuit, determine the total voltage across the circuit.

From the information provided, there are four resistors labeled as 12 Ω each. Assuming these resistors are connected in series, the total resistance in the circuit is 12 Ω + 12 Ω + 12 Ω + 12 Ω = 48 Ω.

Next, determine the current flowing through the circuit. The voltage is given as 24 V.

Using Ohm's Law (V = IR), calculate the current:

I = V / R

I = 24 V / 48 Ω

I = 0.5 A

Since the resistors are connected in series, the current remains the same throughout the circuit.

Finally, to find the potential difference between points A and B, multiply the current by the resistance between those points:

V_AB = I × R_AB

V_AB = 0.5 A * 24 Ω

V_AB = 12 V

Therefore, the potential difference between points A and B in the circuit is 12 V.

Find out more on potential difference here: https://brainly.com/question/24142403

#SPJ1

In unfinished basements and crawl spaces, where cable is run at angles with joists, it must be secured in a listed conduit or tubing, or protected in accordance with 300.4. The cable must be secured within 300 mm (12 in.)

Tubing is a recreational activity that involves riding an inner tube or other floatation device down a river, lake, or other body of water. It is a popular pastime in many parts of the world, usually done in groups or with friends. Tubing can range from a peaceful and relaxing float down a river to a thrilling and adventurous ride down rapids and over waterfalls. It is a great way to enjoy the outdoors and experience nature in a unique and exciting way. Safety is of utmost importance when tubing, as participants must wear life jackets and helmets and take necessary precautions to ensure they stay safe while out on the water.

To learn more about tubing

https://brainly.com/question/30591629

#SPJ4

Answer:

The net torque will be "1366.33 Nm".

Explanation:

The given values are:

Length of ladder,

\(\tau_{242N} = 9.83 \ m\)

then,

\(\tau=4.92\)

Mass,

= 20.3 kg

Now,

The net torque will be:

⇒  \(\tau_{net}=\tau_{mg}+\tau_{242}\)

On putting the given values, we get

⇒         \(=4.92\times (-mg)+9.83\times (+242)\)

⇒         \(=4.92\times (-21\times 9.8)+9.83\times 242\)

⇒         \(=-1012.53+2378.86\)

⇒         \(=1366.33 \ Nm\)

Answer:

Option C: Third Class

Explanation:

This is third class because the effort or the input force is in the middle between the fulcrum and the load.

To solve this, we must be knowing each and every concept related to lever.  Therefore,  due to the effort or input force being in the center between the edge as well as the load, the supplied lever is of 3rd class. The correct option is option C.

A lever is a basic device that consists of a beam or stiff rod located at a set tight, or edge. It is used to apply force to a load and often offers a mechanical advantage.

A stiff object that can rotate about a spot on itself is called a lever. The three types of levers are categorized according to where the edge, weight, and effort are located. Due to the effort or input force being in the center between the edge as well as the load, the supplied lever is of  3rd class.

Therefore,  the correct option is option C.

To learn more about lever, here:

https://brainly.com/question/2860526

#SPJ2

Vehicles need to be serviced for several reasons such as preventing costly repairs and improving fuel economy.

First, regular maintenance can help to prevent costly repairs down the road. Second, maintenance can help to improve fuel economy and emissions. Third, maintenance can help to keep your vehicle safe and reliable.

The servicing requirements for petrol/diesel and electric vehicles differ in a number of ways. Petrol/diesel vehicles require oil changes more frequently than electric vehicles. This is because petrol/diesel engines use oil to lubricate the moving parts, while electric motors do not. Petrol/diesel vehicles also require tune-ups more frequently than electric vehicles.

This is because petrol/diesel engines have more moving parts that need to be synchronized, while electric motors have fewer moving parts.

Find out more on servicing cars at https://brainly.com/question/30700999

#SPJ1

The magnitude of the force that the Earth exerts on the book is the same as the magnitude of the force that the book exerts on the Earth. Thus, the correct option is D.

The Newton's third law of motion states that for each and every action i.e., force in nature there is an equal and opposite reaction. If an object exerts force on another object, the another object will also exert an equal and opposite force on the first object. In other words, forces result from interactions of object.

In this case, as the book falls on the ground, the force will is exerted on the ground by the book is same in magnitude to the force exerted by the book on the ground.

Therefore, the correct option is D.

Learn more about Force here:

https://brainly.com/question/1675020

#SPJ1

Answer:

the answer is B

Explanation:

speed is the rate at which the distance covered changes or the distance divided by the time taken.

scalar is always positive.

The speed is a scalar quantity. The option (B) phrase describes speed correctly.

How quickly something is traveling or how quickly it covers a distance is measured by its speed. Due to its scalar nature, it only possesses magnitude and no direction. Comparatively, velocity is a vector quantity that combines magnitude and direction.

Speed is the rate at which an object shifts positions. It doesn't take the motion's direction into account.

Without taking into account direction, speed is a measure of how quickly an object is traveling. It's an essential idea in physics and daily life that's used to compare different things' rates of motion and to define how rapidly they travel distances.

Hence, the speed is a scalar quantity. The option (B) phrase describes speed correctly.

To learn more about Speed, here:

https://brainly.com/question/28224010

#SPJ3

Answer:34.6 m/s

Explanation: It is asking how long meaning the answer is in time

Answer:

11. D

12. A

13. B

Explanation:

As the ball leaves the hand, the velocity of the ball while moving in the upward direction is decreasing.

Thus, the change in velocity that that that takes place with respect tnon-zeros

non-zero.

Thus, the acceleration of the ball moving upward is non-zero.

According to newton's second law, the net force acting on the ball is,

where m is the mass of the ball,

As the mass of the ball and acceleration of the ball is non-zero, thus, the net force acting on the ball moving upward is non-zero.

Hence, the given statement of zero net force is incorrect and no is the correct answer.

Thus, the acceleration of the

The five examples of pseudoscience found on the Internet include the following:

Pseudosciences is defined as the science that is regarded as false science because it deals with something that has no connection to proper scientific methodology and cannot be proven realistically.

The different types of Pseudosciences include the following:

Learn more about earth shape here:

https://brainly.com/question/30820375

#SPJ1

Answer:The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would..

Explanation: It would decrease.

The Moon has a smaller mass than the Earth. If you were to travel to the moon your weight would decrease because the acceleration due by gravity on the moon is less than the acceleration due to gravity on the earth, therefore the correct answer is option C.

It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another.

In comparison to the Earth, the Moon is less massive. Your weight would drop if you traveled to the moon because the acceleration caused by gravity there is lower than that caused by gravity here on Earth.

As a result of the less gravity on the moon, the weight would decrease.

Thus, the correct answer is option C.

To learn more about gravity from here, refer to the link;

brainly.com/question/4014727

#SPJ2

Answer: first and third.

Explanation:

An equation is dimensionally correct if the units are the same in both sides of the equation.

first, let's define the units used:

{m} = kg

{v} = m/s

{F} = kg*m/s^2

{x} = m

{t} = s

{a} = m/s^2

Now, let's analyze each option:

1) m*v/t = F

in the left side the units are:

{m}*{v}/{t} =  kg*(m/s)*(1/s) = kg*m/s^2

And as is written above, these are the units of F, so this is correct.

2) x*v^2 = F*(x^3/x^2)

This is more trivial, in the right side we can see an F, that has mass units (kg)  and in the left side we have x and v, and we know that none of these have mass units, so this expression is not correct.

3) xt= vt^2+at^3

the units in the right side are:

{x}*{t] = m*s

in the right side are:

{v}*{t}^2 + {a}*{t}^2 = (m/s)*s^2 + (m/s^2)*s^3 = m*s + m*s

So in both sides of the equation we have the same units, then this equation is dimensionally correct.

At point A the force is 571.6 N. At point B the force is 632.8 N. The minimum speed at point A is 8.32 m/s

The force of the car seat on the child can be determined using the equation F = m * a, where F is the force, m is the mass, and a is the acceleration. The acceleration can be found using the equation a = v^2/r, where v is the speed and r is the radius.
(a) At point a, the speed is 10.0 m/s and the radius is 7.00 m. Therefore, the acceleration is:
a = (10.0 m/s)^2 / (7.00 m) = 14.29 m/s^2
The force of the car seat on the child is:
F = (40.0 kg) * (14.29 m/s^2) = 571.6 N
(b) At point b, the speed is 10.5 m/s and the radius is 7.00 m. Therefore, the acceleration is:
a = (10.5 m/s)^2 / (7.00 m) = 15.82 m/s^2
The force of the car seat on the child is:
F = (40.0 kg) * (15.82 m/s^2) = 632.8 N
(c) The minimum speed required to keep the child in his seat at point a can be found by rearranging the equation for acceleration:
v = sqrt(a * r)
Since the force of the car seat on the child must be equal to or greater than the force of gravity on the child (F = m * g), the acceleration must be equal to or greater than the acceleration due to gravity (a = g = 9.81 m/s^2).
Therefore, the minimum speed is:
v = sqrt((9.81 m/s^2) * (7.00 m)) = 8.32 m/s

Learn more about force:

https://brainly.com/question/12785175

#SPJ11

Regarding a spring-mass system's duration, the square root of the mass and the spring constant have opposing correlations. The length of spring will be longer and vice versa as the mass grows. Therefore, the mass influences spring.

They swing back and forth around a stationary point. Classic examples of this type of vibrating motion are a simple pendulum and a mass on a spring.

Therefore, The use of motion detectors demonstrates that the vibrations of these objects have a sinusoidal nature, even if this is not obvious from plain viewing.

Learn more about spring here:

https://brainly.com/question/14670501

#SPJ1

The near point of a human eye is about a distance of 25 cm.

The closest distance that an object may be viewed clearly without straining is known as the near point of the eye.

This distance (the shortest at which a distinct image may be seen) is 25 cm for a typical human eye.

The closest point within the accommodation range of the eye at which an object may be positioned while still forming a focused picture on the retina is also referred to as the near point.

In order to focus on an item at the average near point distance, a person with hyperopia must have a near point that is further away than the typical near point for someone of their age.

To learn more about near point, click:

https://brainly.com/question/32579304

#SPJ1

Answer:

water heat evaporated small tiny molecules form coluds .then clouds fall it rains at mountains.the water moves down to rivers,lakes.then again water evaporated rain falls . evaporated vapour it cools form water

Answer:

the unbalanced force

Explanation:

An unbalance forces are defined as the forces which causes a change in the speed or velocity of a moving object. A force causes a change in the motion of a body and an unbalanced force causes the body to change its velocity and speed or a change in its direction.

An unbalanced force will start movement in a static object or it can cause to speed up the moving object or it can cause to stop the moving object.

Thus an unbalanced force causes the cart to speed up.

This is because no battery or energy storage device is 100% efficient, meaning that some of the energy that goes into charging the battery is lost as heat or other forms of energy during the charging process.

This loss of energy is due to several factors, including resistance in the battery's electrical components, chemical reactions that occur within the battery during charging, and other inefficiencies in the charging process.

As a result, when the battery is discharged, it cannot release all the energy that was originally put into it during charging, and some of the energy is lost as heat or other forms of energy. This is known as energy loss or energy dissipation, and it is a common occurrence in all types of energy storage systems.

To learn about ohm's law click:

https://brainly.com/question/1247379

#SPJ2

The magnitude of the average force due to air resistance be  188.75 N.

Energy cannot be created or destroyed, according to the rule of conservation of energy. However, it is capable of change from one form to another. An isolated system's total energy is constant regardless of the types of energy present. The law of energy conservation is adhered to by all energy forms. The law of conservation of energy essentially says that

The total energy of the system is conserved in a closed system, also known as an isolated system.

Total energy of the chuck of ice at 553 m tall tower: E = mgh

= 25.0 × 9.8 × 553 Joule = 135485 joule.

If the average force due to air is W the, total energy of the ice at 353 m above the ground:

E = mgh + 1/2mv² + W(553-353)

=  25.0 × 9.8 × 353  + 1/2×25×30² + 200 W

= 97735 + 200 W joule

According to conservation of energy:

135485 =  97735 + 200 W

⇒ 200 W = 37750

⇒ W =  188.75 N.

Hence, the magnitude of the average force due to air resistance be  188.75 N.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

The magnitude of the electric flux through the sheet is 4.05 N m² C⁻¹ (Option E).

The electric flux through a surface is given by the product of the electric field strength and the area of the surface projected perpendicular to the electric field.

In this case, the electric field strength is 18 N C⁻¹, and the area of the sheet projected perpendicular to the electric field is 0.450 m²

(since the normal to the sheet makes an angle of 60° with the electric field). Multiplying these values gives the electric flux:

Electric flux = Electric field strength × Area

Electric flux = 18 N C⁻¹ × 0.450 m²

Electric flux = 8.1 N m² C⁻¹

In summary, the magnitude of the electric flux through the sheet is 4.05 N m² C⁻¹. This value is obtained by multiplying the given electric field strength by the projected area of the sheet perpendicular to the electric field.

The angle of 60° is taken into account to determine the effective area for calculating the flux.(Option E).

for such more questions on electric

https://brainly.com/question/1100341

#SPJ8

Answer: \(3000\ W,\ 78,000\ J\)

Explanation:

Given

The voltage of the battery is \(V=12\ V\)

Current through the battery is \(I=250\ A\)

(a) Power is the product of voltage and current

Power dissipates is given by

\(P=VI\\P=12\times 250\\P=3000\ W\)

(b) Energy delivered

\(E=P\times t\)

\(E=3000\times 26\\E=78,000\ J\)

Gerard's average velocity for the ride is 6 meters per second.

To find Gerard's average velocity for the ride, we can use the formula:

Average velocity = Total displacement / Total time

First, we need to convert the distance traveled from kilometers to meters:

7.20 kilometers * 1000 = 7200 meters

Next, we convert the time from minutes to seconds:

20.0 minutes * 60 = 1200 seconds

Now, we can calculate the total displacement by subtracting the initial position from the final position. Since Gerard is riding directly east, there is no change in the east-west direction, so the displacement is equal to the distance traveled:

Total displacement = 7200 meters

Finally, we substitute the values into the average velocity formula:

Average velocity = 7200 meters / 1200 seconds

Average velocity = 6 meters per second

for more questions on average velocity

https://brainly.com/question/4931057

#SPJ8

The change in the displacement is 70 m

Recall that the displacement is obtained as the product of the velocity and time. We have the velocity at two intervals.

At v1, the displacement can be obtained from;

x1 = 0.5 * 20 = 10 m

At v2, the displacement can be obtained as;

x2 = 2 * 40 = 80 m

Now

Δx = 80 m - 10 m = 70m

Thus the change in the displacement is 70 m

Learn more about displacement:https://brainly.com/question/11934397

#SPJ1

Definition: Science helps us understand the workings of the universe and everything in it.

Using Science, we increase our knowledge by: