Given a 2.50-σF capacitor, a 6.25-σF capacitor, and a 6.00 -V battery, find the charge on each capacitor if you connect them.(a) in series across the battery.

\(\lambda=\frac{v}{f}=\frac{400}{200}=2[m]\)

Answer:  At 508k temperature the gas  will reach the pressure.

Explanation:

\(T_{2} =\frac{P_{2} T_{1}}{P_{1}} \\T_{2} =\frac{825kPa * 237K }{388kPa} = 580k\)

Answer: 580k

Explanation: Gradpoint

Answer:

the answers is 1.

Explanation:

this is because heat always travel's from the warmest object to the coldest. His hands thermal energy is transferred to the ice making the ice round to the same temperature of his hand. This can also be an example of equalibrum.

three plus four NERD

When a body jumps into the air, in addition to the effects of gravity and air resistance, several other factors influence its trajectory. Three of the most important factors are Initial velocity, angle of projection, and Spin or angular momentum.

Initial velocity: The velocity at which the body jumps into the air has a significant effect on its trajectory. A body that jumps with a higher initial velocity will travel farther and higher than one that jumps with a lower velocity.

The angle of projection: The angle at which the body is projected into the air can greatly affect its trajectory. If the body is projected at a low angle, it will travel farther along the ground, while a higher angle of projection will result in a shorter distance but greater height.

Spin or angular momentum: The spin or angular momentum of the body can affect its trajectory by causing it to deviate from a straight line. A body with no spin will typically follow a straight trajectory, while one with spin will experience a curved or twisting motion in the air. This effect is particularly important in sports such as baseball, tennis, and gymnastics, where the spin of the ball or body can greatly influence its trajectory.

Learn more about projectile motion here:
https://brainly.com/question/29545516
#SPJ1

When an object vibrates about an equilibrium point, the motion is called simple harmonic motion if the restoring force is proportional to the displacement from the equilibrium point.

This means that the force that brings the object back to its equilibrium position increases linearly with displacement. This restoring force is often provided by a spring, and is described by Hooke's law, which states that the force is proportional to the displacement from equilibrium. Simple harmonic motion is a fundamental concept in physics and is used to model many real-world phenomena, such as the motion of a pendulum, a mass on a spring, or the vibration of molecules in a crystal lattice. Understanding simple harmonic motion is important in many fields, including engineering, physics, and mathematics. It also has applications in music, where it is used to describe the motion of sound waves.

To know more about equilibrium point visit:

https://brainly.com/question/1527528

#SPJ11

Answer:

No

Explanation:

The fastest recorded time for a person to run 100 metres is 9.58 seconds, which is the equivalent of 10.4 metres per second

Answer:

No

Explanation:

Humans can run as fast as 19.3m/s, using their full possible energy.

It's important to know that the wavelength and the frequency has inverse relationship, which means the longest is its wavelength, the more intense will be the frequency.

The capacitance of the capacitor in this circuit is approximately 7.96 x 10^(-7) Farads.

Based on the information given, we have an RLC series circuit with an inductive reactance of 200 Ω, a resistance of 200 Ω, and a phase angle of 40.0° at a frequency of 1.00 kHz. We need to find the capacitance of the capacitor in this circuit.
To solve this, we can use the impedance formula for an RLC series circuit:
Z = √(R^2 + (Xl - Xc)^2)
Where Z is the total impedance, R is the resistance, Xl is the inductive reactance, and Xc is the capacitive reactance.
We know the values of R and Xl, but we need to find Xc.
To find Xc, we can use the formula:
Xc = 1 / (2πfC)
Where Xc is the capacitive reactance, f is the frequency, and C is the capacitance.
Substituting the given values into the formula, we can find Xc:
200 Ω = 1 / (2π * 1.00 kHz * C)
Now we can solve for C:
C = 1 / (2π * 1.00 kHz * 200 Ω)
Simplifying the equation gives us:
C ≈ 7.96 x 10^(-7) F
Therefore, the capacitance of the capacitor in this circuit is approximately 7.96 x 10^(-7) Farads.

To know more about capacitance visit:

https://brainly.com/question/31871398

#SPJ11

According to Law of Conservation of energy ,

One form of energy is transformed into another form of energy and there is no loss of energy in the transformation process.

The law of conservation of energy states that the energy can neither be created nor be destroyed only converted from one form of energy to the other form of energy means that the system always has the same amount of energy , unless its's added from the outside.

The only way to use energy is to transform energy from one form to another form.

example - Heat energy is transformed into Kinetic and Potential energy.

To know more about the Conservation of energy here

https://brainly.com/question/13949051

#SPJ1

Answer:

it is 15

Explanation:

join

Answer:

254 m/s

Explanation:

(Vf-Vi) = at

(Vf-14)= 60 (4)

Vf = 254 m/s

Electrical forces between charges are normally strongest when the charges are close together.

The repulsive or attractive interplay among any charged bodies is known as an electric-powered force. just like any pressure, its effect and effects on the given frame are defined by means of Newton's laws of motion. the electric force is one of the diverse forces that act on gadgets.

Electric-powered force is the attractive pressure between the electrons and the nucleus. Now, a nice price or a bad price creates a field inside the empty space around it, and we call that empty area an electric field. electrical forces result from mutual interactions between prices. In situations involving three or greater expenses, the electric force on a single charge is merely the result of the blended results of every character fee interplay of that price with all different charges.

To learn more about Electrical force visit here:

brainly.com/question/2526815

#SPJ4

The law of reflection states that the angle of incidence and the angle of reflection will always be equal.

When a ray of light reflects off a surface, the angle of reflection is equal to the angle of incidence.

The output power in mW is 3.98 mW. In this communication system, the input power is 100 mW, and the system has a total gain of 20 dB and a total loss of -13 dB.

For calculating the output power, first, convert the gain and loss values from dB to a linear scale.

The gain of 20 dB can be converted to a linear scale using the formula:

\(Gain (linear scale) = 10^{(Gain (dB) / 10)}.\)

So,\(Gain (linear scale) = 10^{(20/10)} = 100.\)

Similarly, the loss of -13 dB can be converted to a linear scale using the formula:

\(Loss (linear scale) = 10^{(Loss (dB) / 10)}.\)

So,\(Loss (linear scale) = 10^{(-13/10)} = 0.0501.\)

Now, calculate the output power by multiplying the input power by the gain and dividing it by the loss.

Output power = (Input power) * (Gain (linear scale) / Loss (linear scale))

= 100 * (100 / 0.0501) = 3.98 mW.

Learn more about output power here:

https://brainly.com/question/887309

#SPJ11

Answer:

Good one

Explanation:

Hydrogen has the highest thermal conductivity of any gas.

Theta = position angle, t = time, and w = angular velocity, where w = angular velocity, theta = position angle, and t = time. Angular velocity is the rate of change of an object's position angle with respect to time.

Thus, An object's rate of rotation and direction of rotation are both described by its angular velocity.

It is customary for the positive direction to be in the counterclockwise direction. Here are some angular velocity issues for practice. The ratio of the angular displacement () to the time of motion, for a constant angular velocity, is the angular velocity.

Angular velocity only applies to things that are moving in a circular motion, making it less frequent than linear velocity.

A racecar on a circular track, a roulette ball on a wheel, or a Ferris wheel are a few examples of objects with angular motion.

Thus, An object's rate of rotation and direction of rotation are both described by its angular velocity.

Learn more about Angular velocity, refer to the link:

https://brainly.com/question/30237820

#SPJ1

Answer:

When i was doing the problem i got no solutions

Hopes this helps!

Top requires 0.57 s to complete its first five revolutions.

How long does it take for the top to complete the first five revolutions?

To learn more about top refers to:

https://brainly.com/question/16533738

#SPJ4

Answer:

her displacement s=337.5m

Explanation:

check out the above attachment ☝️

Displacement after 15.0 seconds s= 337.5 m

The rate of change of velocity is called acceleration.

Acceleration. speed is the charge of the exchange of displacement. Acceleration is the charge of the exchange of speed. velocity is a vector quantity because it consists of each significance and direction. Acceleration is also a vector quantity as it's far just the fee of alternate of pace.

Acceleration of 3.0 m/s²

Time= 15.0 seconds

S= ut + 1/2 at²

S = 0+0.5*3*15*15

 =337.5 m

Learn more about acceleration here:-https://brainly.com/question/460763

#SPJ2

A student is creating an electromagnet for an investigation, and the one feature of the electromagnet that will have the least influence on the magnetic force is the brand of the battery, which is the last option.

The magnetic force of an electromagnet is determined by a number of factors, such as the material of the core and the number of wire coils, and the size of the power source but the brand of the battery don't have an effect on the magnetic force of the electromagnet as long as the battery provides the necessary voltage and current to power the electromagnet.

Hence, the one feature of the electromagnet that will have the least influence on the magnetic force is the brand of the battery, which is the last option.

Learn more about the electromagnet here.

https://brainly.com/question/30306309

#SPJ1

Answer:

a. normal

Explanation:

In the field of physics the normal is a line drawn at a right angle to a barrier. In other words the normal line is the line that is drawn perpendicular (right angle, 90 degrees) to the reflective surface of a mirror, or the particular boundary in which refraction occurs at the point of incidence of a light ray. This can be seen in the picture attached below.

Answer:

momentum

Explanation:

The net impulse delivered to an object always causes a change in the object's momentum. Hence, option (B) is correct.

The given problem is based on the concept of net impulse. The magnitude of force acting on any object for very short interval of time is known as impulse. In the given problem, the transfer of impulse can be explained by the impulse - momentum theorem.

\(F \times t = \Delta P\\\\I= \Delta P\)

Here, I is the impulse.

Thus, we can conclude that the net impulse delivered to an object always causes a change in the object's momentum. Hence, option (B) is correct.

Learn more about the impulse-momentum theorem here:

https://brainly.com/question/24744548

A man with a femur length of 38cm would have an approximate height of 218.69 cm, and a woman with a femur length of 28cm would have an approximate height of 123.26 cm.

Using the formulas provided:

For a man with a femur length of 38cm:

Therefore, a man with a femur length of 38cm would have an approximate height of 218.69 cm.

For a woman with a femur length of 28cm:

Therefore, a woman with a femur length of 28cm would have an approximate height of 123.26 cm.

Note: This question is incomplete. Here is the complete information:

According to the above, what is the height of a man with a femur lenght of 38cm and a woman with femur lenght of 28cm?

Learn more about height in: https://brainly.com/question/10726356
#SPJ1

Answer:

a)0.51°

b)1.47×10^-4m

Explanation:

a)for a single slit experiment, the minima that has an angle of θ towards the centre needs to satisfy the expression below.

bsin(θ)= mλ.........................(*)

Where b= width of the slit

The distance on the screen from Central angle can be expressed as

Sin(θ)= y/d............. (**)

d and y is the horizontal distance between slit and screen

If we input eqn(**) into equation (*) we have

y= mλd/b................(z)

In order to find angle (θ) we have

(θ)= sin-(1.99×10^-2)/2.25

= 0.51°

Therefore, angle of diffraction θ of the second minimum is 0.51°

b)to find the width of the sloth using eqn(z) by substitute the values, we have

b= (2)(649×10^-9)(2.25)/1.99×10^-2

b= 1.47×10^-4m

Therefore, the width of the slit is 1.47×10^-4m

Answer:

20N

Explanation:

newtons 3rd law every action has an equal opposite reaction

I'm not too sure