the biggest difference between a laptop and a desktop computer is

The Attitude Control System (ACS) is a system that governs the spacecraft's position and orientation in space. When it comes to the TIMED mission, the Attitude Control System (ACS) had two major issues, which are elaborated below:1. A pitch rate gyro drift: It was discovered that one of the pitch rate gyros was affected by a constant drift, which was most likely caused by radiation exposure.

This resulted in attitude estimation errors, which meant that the spacecraft was pointed in the wrong direction.2. An ACS magnetic sensor failure: A sudden voltage spike caused a magnetic sensor's permanent failure, which then resulted in large attitude errors. The ACS magnetic sensor is an important component of the ACS since it determines the spacecraft's orientation in space.

The sensor in question was unable to estimate the correct magnetic field vector and, as a result, could not calculate the spacecraft's orientation correctly. Both the pitch rate gyro drift and the magnetic sensor failure led to the spacecraft's inability to maintain its orientation in space.

To know more about orientation  visit:-

https://brainly.com/question/31034695

#SPJ11

Your credit reports and scores will be taken into consideration by lenders when deciding whether you qualify for a loan and what interest rate to offer you.You can have problems getting a loan if your credit report contains mistakes.So, check your credit right away.

Should you check your credit score before applying for a mortgage?

       To learn more about mortgage refer

     https://brainly.com/question/1318711  

      #SPJ1

hello friend! make it a great day! smile laugh celebrate..................

Those individuals who break into computer systems with the intention of doing damage or committing a crime are usually called b. crackers

Individuals who break into computer systems with the intention of doing damage or committing a crime are usually referred to as "crackers." Crackers are distinct from hackers, as hackers generally use their skills for positive purposes such as exploring and improving computer systems. On the other hand, crackers exploit vulnerabilities in computer systems to gain unauthorized access, steal data, or disrupt services. They may employ various techniques, such as password cracking, social engineering, or exploiting software vulnerabilities. These individuals often have malicious intent and engage in illegal activities.

It is important to understand that the term "computer geniuses" is a broad descriptor that encompasses individuals with exceptional skills and knowledge in the field of computing. Not all computer geniuses engage in illegal activities or break into computer systems. Similarly, "computer operatives" is a more general term that can include individuals involved in various computer-related operations, both lawful and unlawful.

To summarize, the appropriate term for individuals who break into computer systems with malicious intent is "crackers." They exploit vulnerabilities for illegal purposes, distinguishing them from hackers who typically use their skills for positive and ethical endeavors.

To learn more about cybersecurity: https://brainly.com/question/28004913

#SPJ11

Answer:

public class Main

{

public static void main(String[] args) {

    int nPositive = 0;

    int[][] a2d = {{-7,28, 92}, {0,11,-55}, {109, -25, -733}};

 for (int i = 0; i < a2d.length; i++) {

                  for(int j = 0; j < a2d[i].length; j++) {

         if(a2d[i][j] > 0){

             nPositive++;

                       }

                  }

 }

 System.out.println(nPositive);

}

}

Explanation:

*The code is in Java.

Initialize the nPositive as 0

Initialize a two dimensional array called a2d

Create a nested for loop to iterate through the array. If an element is greater than 0, increment the nPositive by 1

When the loop is done, print the nPositive

Answer:

const a2d =  [[7,28, 92], [0,11,-55], [109, -25, -733]];

let nPositive = a2d.reduce((a,c) => a + c.filter(n => n>0).length, 0);

console.log(nPositive);

Explanation:

Just for fun, I want to share the solution in javascript when using the powerful list operations. It is worthwhile learning to understand function expressions and the very common map(), reduce() and filter() primitives!

Hi! Computer is an electronic device for storing and processing data, typically in binary form, according to instructions given to it in a variable program.

Answer:

3 5

Explanation:

Store the address of the function call is the first thing the compiler does when a function is called.

Compiler is a program used to convert code written in natural language processing so that it can be understood by computers.

In compilating process, the compiler executes code that indicates when a binary high and low signal is needed in the processor arithmetic logic unit.

There are two types of compilers that are commonly used by web developers.

Even though the main job of the compiler is converting the code, there are several other tasks that it also performs. Here are some of them.

Your question is incomplete but most probably your full question was:

Which is the first thing the compiler does when a function is called?

a.Converts the function's code to assembly b.Creates instructions to jump to the function c.Stores the address of the function call

d.Creates a jump instruction to the function

Learn more about compiler at https://brainly.com/question/27882492.

#SPJ4

A malicious actor with knowledge of automata could potentially exploit vulnerabilities in the system's design or implementation to alter its function, leading to improperly made products or even catastrophic failure. Here's a rationale to support this:

1. Understanding system behavior: Automata theory is concerned with the study of abstract machines and their behaviors. A malicious actor with knowledge of automata can use this understanding to analyze the system's design and identify potential weaknesses or points of manipulation.

2. Manipulating input/output transitions: Automata models have states and transitions that define the system's behavior. By altering the input/output transitions, a malicious actor can disrupt the normal functioning of the system. They could manipulate the inputs in a way that leads to unexpected or erroneous outputs, causing the system to produce faulty or substandard products.

3. Exploiting edge cases: Automata theory also deals with the analysis of edge cases and exceptional scenarios. A malicious actor could exploit these edge cases by deliberately inputting data that triggers unexpected or unhandled transitions in the automaton. This could cause the system to behave in unpredictable ways or encounter errors, leading to product defects or failures.

4. Tampering with system components: Automata-based systems often involve multiple components working together. A malicious actor could target specific components and alter their behavior to introduce faults or malfunctions. By modifying the internal states or transitions of individual components, they can disrupt the overall system's functioning, leading to product failures or catastrophic consequences.

6. Injecting malicious code or logic: If the automata-based system relies on software or programmable components, a malicious actor can attempt to inject malicious code or logic into the system. By introducing unauthorized modifications to the code, they can manipulate the system's behavior to produce faulty or dangerous outputs, potentially causing catastrophic failures.

It is worth noting that such malicious activities require deep knowledge and expertise in both automata theory and the specific system being targeted.

Learn more about Automata Theory here:

https://brainly.in/question/13978417

#SPJ11

Answer:

The answer is the last choice that is "None of these values will produce a mathematical error".

Explanation:

In this question, the above given choice correct because neither of the flowchart procedures could trigger a mathematical error. This error could not be induced by multiplication, addition and subtraction, and the only division by 15. It is the only divide by 0, that's why the above flowchart will produce a mathematical error.

Answer: a) a line's x-height.

Explanation: The middle of the parent element is calculated by taking the x-height, halving it, and adding it to the baseline. Therefore, the "middle" value for the "vertical-align" property must be also based on the line's x-height.

RB (read-bytes) and WB (write-bytes) are the two access modes that are used when opening a file for input and output when pickling.

Pickling is the concept of serializing a python object into a byte stream. The basic concept of pickle is to store the object for a long period of time, with the prevention of any harm to the object. So, basically, Pickling is done to store the object.

To do the pickling process, In Python Training, It has a module named Pickle. The Pickle module has a dump() function, which is made to store the object in a bit file. That bit file must have the extension .pickle.

So, the dump() will take our object and dump it inside the .pickle file.

Learn more about pickling

https://brainly.com/question/14340207

#SPJ4

Remember to adapt the steps above to the specific requirements of your lab and ensure that you understand the functionality of the 7-segment driver module and its input/output signals. To write a Verilog module equivalent to your solution to lab3, follow these steps:

1. Define the inputs and outputs of your module. Identify the necessary inputs and outputs based on the requirements of the lab. For example, if you need to display a number on a 7-segment display, you will need input signals to represent the number to be displayed.

2. Instantiate the provided 7-segment driver into your module. You can do this by declaring an instance of the 7-segment driver module and connecting its input and output signals to the appropriate signals in your module.

3. Use continuous assign statements to define the final equations for your module. Continuous assign statements are used to continuously assign values to signals based on the defined equations. For example, if you need to convert a binary number to a BCD format, you can use continuous assign statements to implement the conversion logic.

4. Test your module. Once you have written your Verilog module, it is important to test it to ensure that it functions as expected. You can create testbenches or simulation models to verify the correctness of your module.

To know more about requirements visit:

https://brainly.com/question/2929431

#SPJ11

Answer:

Simulated Labs

Web-Based Educational Games

Discussion Forums

Explanation:

Did a test with the same question.

Online resources that students can use for help are simulated labs, web-based educational games, and discussion forums.

Online sources in education refer to any resource available on the Internet in an internet instructional environment.

It is probably HTML files including course or chapter objectives, lecture notes, assignments, and many more. These are probably audio or video lessons, interactive exercises or exams, or files that provide hyperlinks to different websites.

Hence, Online resources that students can use for help are simulated labs, web-based educational games, and discussion forums.

Learn more about online sources in education here:

https://brainly.com/question/14591988

#SPJ2

The substance I think is in the cylinder that you cannot see and prevents the plunger from going all the way in even when you push the plunger hard is Air.

When a person push on the plunger, the person can feel the air pushing it back. When a person has stop pushing, the air inside the syringe will tend to return to its normal size.

Note that there are a lot of ways to compress air. A person can do so by  squeezing  a specified volume of air into a smaller space.

Learn more about cylinder from

https://brainly.com/question/26806820

Answer:

climate is what you expect and weather is what you get. More formally, climate is the long-term average of temperature, precipitation, and other weather variables at a given location

Explanation:

Answer:

Geography

Explanation:

Answer:

rotate

hope it helps

Explanation:

to round the edges off selected segment rotate can do it

The type of variable stored on an IIS Server that exists while a web browser is using the site, but is destroyed after a time of inactivity or the closing of the browser is A) Session.

A session variable is a type of variable that is temporarily stored on the server-side during a user's interaction with a website. When a web browser accesses a site, the server creates a session ID for the user. This session ID is used to identify the user and store data related to their activity on the site. Session variables are useful for maintaining state and tracking user interactions, such as user authentication and shopping cart data.

In contrast, cookies are small text files stored on the user's device by the web browser, and they persist even after the browser is closed. Public, private, and application variables are not specifically related to the scenario you described. Public and private variables are access modifiers in programming languages that determine the scope of a variable, while application variables are used to store data that is shared across all users and sessions in a web application.

In summary, session variables are the appropriate choice for storing temporary data on the server-side while a user is actively browsing a website, and they are destroyed when the user's session ends due to inactivity or the closing of the browser.

To know more about the IIS server, click here;

https://brainly.com/question/9617158

#SPJ11

A method that has multiple definitions is an overloaded method. The versions of an overloaded method are distinguished by the number, type and order of their parameters.

What is meant by Parameters ?

To learn more about Parameters refer to

https://brainly.com/question/28175212

#SPJ4

Answer: I belive the answer to be (C)

Explanation:

Answer:

D

Explanation:

Because the bank lends that money out at a higher interest rate

KEEP IN TOUCH IF YOU NEED ANYTHING.

Tori's configuration method is the "default allow" approach. This approach assumes that all network traffic is safe and allows it to flow freely.

As malicious traffic is identified, it is added to a list of exceptions, blocking it from future access. This method allows for greater flexibility and ease of use, but it also requires constant monitoring and updating of the exception list to ensure maximum security.

Assumes that all network traffic is malicious and blocks it by default, only allowing explicitly approved traffic to pass through. While this approach provides a higher level of security, it can also be more difficult to manage and may cause disruptions to legitimate network traffic.

To know more about network traffic visit:-

https://brainly.com/question/18993958

#SPJ11

We have three member fields to define including an int called m max size, an array of items called m items, and an int called m gold.

The first member field is an int called m max size. Int stands for integer which means it's a whole number that can be positive or negative but cannot be a fraction. So, m max size is a whole number field that will be used to store the maximum size. The next field is an array of items called m items.

An array is a data structure that can hold a fixed-size collection of elements, all of the same type. The array of items is used to store different items that are associated with a particular object or entity. Lastly, an int called mgold is another field. The "m" before the field indicates that it is a member variable.

To know more about including visit:-

https://brainly.com/question/33813792

#SPJ11

Answer:

i like k pop a little and im a blink i also like mother mother and arctic monkeys

Explanation:

Answer:

k-pop & Blackpink

Explanation:

<3

Considering the Java statement: int num = 10; What is the value of the variable num stored 10 in numerical form.

a pointer to the built-in Circle object's memory address. Num is an integer, and cost is a double. These two variables have been declared and assigned values. One statement should output both the number and the cost to standard output. Print both values on a single line that ends with a newline character, separated by a space (number first, then cost). Similar to the ones before, many variables store numbers and strings. Lists, dictionaries, and Boolean values (true/false) are just a few more sorts of information that can be stored in variables.

Learn more about information here-

https://brainly.com/question/15709585

#SPJ4

Answer:

a. more quickly

Explanation:

SELECT  

   distributor_id,  

   COUNT(*) AS TOTAL,  

   COUNT(IF(level='exec',1,null)),

   COUNT(IF(level='personal',1,null))

FROM sometable;

Answer:

11111011

Explanation: