which pairs of wires change termination order between the 568a and 568b standards?

Answer: First Amendment

Explanation:

The First Amendment gives individuals the freedom of speech and the right to proactive any religion that they want. It also allows the people have a peaceful protest.

The swcud amendment gives people the right to keep arms. The Fourth hinders individuals from being searched without a warrant.

Therefore, the answer is First Amendment.

The correct is option b). Both DSSS and OFDM are resilient in RFI (Radio Frequency Interference) environments and are spectrally efficient.

IEEE 802.11 WLANs use both DSSS (Direct Sequence Spread Spectrum) and OFDM (Orthogonal Frequency Division Multiplexing) because they are considered spread spectrum technologies, which means they have good resistance to Radio Frequency Interference (RFI) and are spectrally efficient. DSSS spreads the signal across a wide frequency band, while OFDM divides the signal into multiple narrowband subcarriers, which are orthogonal to each other. Both techniques allow the transmission of data over a longer distance with a higher data rate, which is important for WLANs.

FDM, on the other hand, is not used in WLANs because it is not as efficient as DSSS and OFDM, and is more susceptible to RFI. FDM divides the frequency spectrum into multiple sub-channels, each of which is used to transmit a separate data stream. However, this approach is less spectrally efficient than DSSS and OFDM, and is less resistant to RFI, which can cause interference with adjacent sub-channels.

In summary, DSSS and OFDM are used in IEEE 802.11 WLANs because they are spread spectrum technologies, spectrally efficient, and resistant to RFI. FDM is not used because it is less efficient and more susceptible to RFI.

To know more about DSS and OFDM visit:

https://brainly.com/question/31381747

#SPJ11

Answer:

They are inappropriate

fallouts: Access denial and data theft

Explanation:

Dos ( denial of service ) and DDos ( distributed denial of service ) are inappropriate for legitimate organizations to use against each other. because DOS or DDos attacks are attacks on the server of an organization by sending an unusual amount of traffic to the server, thereby denying the devices and users connected to the server access to the server.

Access denial and data theft are the fallouts associated with DOS  and DDos attacks

True. A pliable Type ENT (Electrical Nonmetallic Tubing) raceway is a type of non-metallic conduit that is flexible and can be bent by hand without the use of tools. It is made of a high-quality plastic material .

A pliable Type ENT raceway is a raceway that can be bent by hand, without the use of any tools. that is lightweight and easy to handle, making it an ideal choice for various electrical wiring applications. ENT raceway is commonly used in residential and commercial construction projects to protect and route electrical wires and cables.

Learn more about  ENT   here:

https://brainly.com/question/30224529

#SPJ11

Answer:

no. 1 is the answer is the answer

Technology read-ahead, technology free-ahead Sequential access is the process of accessing a collection of items in a predetermined, ordered manner, such as data stored on magnetic tape, in a disk file, or in a memory array.

None of the aforementioned technologies can optimize sequential access. It is the opposite of random access, which makes it possible to access any part of a sequence at any time and from any location with the same ease and efficiency.

For instance, sequential access may be the only means of accessing the data when it is stored on a tape. It could likewise be the favored admittance procedure, for example, assuming everything necessary is the deliberate handling of a progression of information pieces.

To know more about sequential access:

brainly.com/question/12950694

#SPJ4

Answer:

D. Prepare the content

Explanation:

Before Jennifer starts designing the website she has to prepare content for the website

Answer:

The answer to this question is given below in the explanation section.

Explanation:

Jennifer has settled the purpose of her website. After setting the purpose of her website, she needs to design the website.

Jennifer when setting the purpose of the website, she also knows about the target users who will use her website and the content that will be displayed on the website. Basically, the purpose means that she knows the requirements for her website. As you know, the requirements include the objective or goal of the website, target user, the architecture of the website, and content for the website.

So the correct answer to this question is to design the website.

Because, after finalization of requirements or purpose, the next steps are designing, coding, and testing.

This is what is known as the software development life cycle.

Answer:

art

Explanation:

An art is a statement used to communicate one’s feelings in a nonconfrontational manner.

Answer:

art

Explanation:

I've answered this before hope this helps :>

Answer:

The Chinese

Explanation:

Answer:

A and C

Explanation:

Based on my computers saving process, A and C both worked while B and D didn't. I tried all four names on a PowerPoint Presentation and only A and C saved.

This is assuming I read your options correctly, I tried the following

.Budget2014

Budget_Proposal?

Budget_Proposal_2014

Budget_Proposal/2014

In the lab, when you configured your virtual hard disk file to manage its size dynamically, this type of allocation is also referred to as (d) Thin provisioning.

Thin provisioning is a storage technique where virtual disk space is allocated on an as-needed basis rather than being pre-allocated upfront.

When configuring a virtual hard disk file with dynamic allocation, the file starts with a small initial size and grows dynamically as more space is required by the virtual machine. This allows for efficient utilization of storage resources since physical disk space is only consumed as data is written to the virtual disk.

Thin provisioning provides flexibility and optimizes storage utilization by avoiding the need to allocate large amounts of storage upfront. It allows for overcommitment of storage resources, where the total provisioned virtual storage can exceed the available physical storage capacity.

However, it's important to monitor and manage thin-provisioned storage carefully to avoid potential issues such as running out of physical disk space. Regular monitoring and capacity planning can help ensure that sufficient physical storage is available to meet the demands of the dynamically allocated virtual disks.

You can learn more about Thin Provisioning at: brainly.com/question/32161426

#SPJ11

Answer:

Explanation:

Select the correct answers.

Which are the benefits of leveraging web technologies?

1) Processing of large amounts of data

2) Better marketing and customer service

The needed alterations to the above code to handle multiple DFAs and corresponding input strings is given below

python

import sys

class DFA:

   def __init__(self, filename):

       self.filename = filename

       self.transitions = {}

   def simulate(self, string):

       state = self.filename[-2][0]

       for char in string:

           for transition in self.transitions[state]:

               if transition[0] == char:

                   state = transition[1]

                   break

       if state in self.filename[-1]:

           return 'Accept'

       else:

           return 'Reject'

def parse_dfa_file(filename):

   with open(filename) as f:

       lines = f.readlines()

   num_states = int(lines[0])

   alphabets = lines[1].strip()

   transitions = {}

   for line in lines[2:-2]:

       parts = line.split()

       start_state = parts[0]

       char = parts[1][1]

       end_state = parts[2]

       if start_state not in transitions:

           transitions[start_state] = []

       transitions[start_state].append((char, end_state))

   start_state = lines[-2].strip()

   accepting_states = lines[-1].split()

   return num_states, alphabets, transitions, start_state, accepting_states

def main():

   dfa_filenames = ['dfa_1.txt', 'dfa_2.txt', 'dfa_3.txt']

   input_filenames = ['s1.txt', 's2.txt', 's3.txt']

   answer_filenames = ['answer1.txt', 'answer2.txt', 'answer3.txt']

   for i in range(len(dfa_filenames)):

       dfa_filename = dfa_filenames[i]

       input_filename = input_filenames[i]

       answer_filename = answer_filenames[i]

       num_states, alphabets, transitions, start_state, accepting_states = parse_dfa_file(dfa_filename)

       dfa = DFA([num_states, alphabets, transitions, start_state, accepting_states])

       with open(input_filename) as f:

           inputs = f.readlines()

       inputs = [x.strip() for x in inputs]

       expected_outputs = [x.strip() for x in open(answer_filename).readlines()]

       for j in range(len(inputs)):

           input_str = inputs[j]

           expected_output = expected_outputs[j]

           actual_output = dfa.simulate(input_str)

           print(f"Input: {input_str}")

           print(f"Expected Output: {expected_output}")

           print(f"Actual Output: {actual_output}")

           print()

if __name__ == "__main__":

   main()

Therefore, In order to run the altered code above, It will go through all the DFAs and their input strings, and show the expected and actual results for each case.

Read more about python program here:

https://brainly.com/question/27996357

#SPJ4

bold text is a answer

The homework gap is likely to translate to lower literacy levels among those that are disadvantaged.

The homework gap refers to the difficulties pupils have doing schoolwork when they do not have access to the internet at home, as opposed to those who do.

Homework is the time students spend outside of the classroom doing assigned assignments to practice, reinforce, or apply newly learned skills and information, as well as to master the abilities required for independent study.

Learn more about homework  at:

https://brainly.com/question/29612162

#SPJ1

Answer:

A function with out parameters cannot take any arguments or perform operations on variables passed in. A function with parameters can.

The command used to add data to an existing row in a table is "UPDATE". This command is used to modify or change the existing data in a table by adding new values to the columns in a specific row. It is important to note that the "UPDATE" command is used for existing rows in a table and not for creating new rows.

On the other hand, the "INSERT" command is used to add new rows to a table and not for modifying or changing existing rows. When using the "INSERT" command, new data is added to a new row and not to an existing row.
The "ADD" command is not a valid SQL command, so it cannot be used to add data to an existing row in a table. Similarly, the "ENTER" command is also not a valid SQL command, and it cannot be used to add data to an existing row in a table. In summary, to add data to an existing row in a table, the "UPDATE" command should be used, and for adding new rows, the "INSERT" command is used. It is important to understand the difference between these two commands and when to use them to manipulate data in a database.

Learn more about existing here:

https://brainly.com/question/30949338

#SPJ11

With regard to computer protection, quarantining is defined as placing a found virus in a secure area on the hard drive. Thus, option B is correct.

Anti-virus as well as anti-malware software employs the quarantine approach to isolate contaminated information stored on a computer. This program can detect malicious operating systems and also files that also include malware.

The defense of computer data and systems against damage, theft, and improper use. Downloading and maintaining an anti-malware program can help protect your computer against virus attacks.

Therefore, option B is the correct option.

Learn more about computer protection, here:

https://brainly.com/question/5397132

#SPJ1

Answer:

where are the options ..... to select

The column Bonus Points in row 3 and compute the points of each sales person [5] are

What is bonus?

Bonus is a form of financial compensation given to an employee or contractor in addition to their regular wages or salary. Bonuses may be awarded to employees based on their performance or for meeting certain goals. Bonuses may be in the form of a cash payment, extra paid vacation, or other benefits such as a stock option or gift. Bonuses may also be awarded to employees for long-term service or loyalty. Bonuses are a way of rewarding employees for their hard work and dedication to the company. They can also be used as an incentive to encourage employees to stay with the company, or to motivate them to reach higher levels of performance.

In the third row of the table, the column ‘Bonus Points’ can be added.

For salesperson A, the bonus points earned can be calculated as follows:

For Faiba - A has sold Sh.600, so the bonus points earned are 600/50 = 12.

For Gateway - A has sold Sh.120, so the bonus points earned are 120/60 = 2.

For Vodafone - A has sold Sh.500, so the bonus points earned are 500/50 = 10.

For SAF - A has sold Sh.120, so the bonus points earned are 120/60 = 2.

Therefore, the total bonus points earned by salesperson A is 12 + 2 + 10 + 2 = 26.

Similarly, the bonus points earned by other salespersons can be calculated and the total bonus points earned by each salesperson can be inserted in the ‘Bonus Points’ column.

To learn more about bonus
https://brainly.com/question/29659552
#SPJ1

Answer:

1. b.

2. c.

4. d.

Explanation:

Answer: object, review, right side

The task that is considered part of network performance management is to monitor the speed of the network’s Internet connection. Thus, the correct option for this question is D.

The tasks of network performance management are as follows:

Apart from this, the strategy of installing, configuring, and maintaining the operating systems and IT infrastructure services are also included under the responsibilities of this professional of network performance management (NPM).

Therefore, the task that is considered part of network performance management is to monitor the speed of the network’s Internet connection. Thus, the correct option for this question is D.

To learn more about Network Performance Management, refer to the link:

https://brainly.com/question/27961985

#SPJ1

Answer:

Rogue Hotspot

Explanation:

To enter privileged exec mode on a cisco packet tracer, enter the command enable to enter Privileged EXEC mode.

The default setting for the device is user EXEC mode, which supports the most basic level of user permissions.

A Cisco router begins in User EXEC mode when you turn it on or log in. This model is extremely constrained and does not permit configuration modifications. Enter the command configure terminal to enter Global Configuration mode while in Privileged EXEC mode (router#).

Therefore, use the command enable to enter Privileged EXEC mode on a Cisco packet tracer to access this mode.

To learn more about exec mode, refer to the link:

https://brainly.com/question/5213706

#SPJ1

Social and emotional interaction refers to the way individuals interact with others and their ability to manage their own emotions in social situations. This involves skills such as communication, empathy, and understanding social cues.

Social and emotional interaction skills are critical for individuals to navigate social situations successfully and form strong relationships. Effective communication, empathizing with others, and understanding social cues can enhance one's ability to connect with others and foster positive interactions. Being able to regulate one's emotions in social situations is also crucial for managing stress, building resilience, and maintaining mental health. These skills can be improved through practice, such as engaging in social activities, seeking feedback, and learning from experience. Education and therapy can also provide valuable tools and strategies for developing social and emotional interaction skills and promoting healthy relationships and emotional wellbeing.

Learn more about mental health here;

https://brainly.com/question/31708532

#SPJ11

Answer:

. . . . . . . S H A W T Y.. . .. . .

Answer:

full and then I would like this

If processes must be performed in a specific sequence, you document the information in the procedural documentation. Procedural documentation is a set of documents that outlines step-by-step instructions on how to carry out specific processes or tasks.

It provides detailed information on the required sequence of steps, including any dependencies or prerequisites that need to be fulfilled before proceeding to the next step. This documentation helps ensure that processes are consistently executed in the correct order, minimizing errors and promoting efficiency. By documenting the sequence of processes in the procedural documentation, individuals involved in the task can easily follow the prescribed steps and ensure that the desired outcome is achieved.

Documenting the sequence of processes in the procedural documentation is crucial for maintaining consistency and efficiency in performing tasks.

To learn more about procedural documentation visit:

brainly.com/question/968907

#SPJ11

Answer:

???

Explanation:

HTML tags - Jonathan is creating a graphic image and wants to write this himself. Web-based application - Jonathan is now intertwining features in an underlying programming code.

HTML tags - Jonathan is creating a graphic image and wants to write this himself: HTML (Hypertext Markup Language) is the standard markup language used for creating web pages.

HTML applet tag - Jonathan is now creating his subscription service and wants it to be hosted in the cloud: The HTML applet tag is a deprecated feature in HTML.

Web-based application - Jonathan is now intertwining features in an underlying programming code: In this scenario, Jonathan is working on a web-based application and wants to combine various features within the underlying programming code.

Thus, this can be the match for the given scenario.

For more details regarding HTML, visit:

https://brainly.com/question/15093505

#SPJ1