How to calculate net work per pound of fluid in bwr?

Answer:

W = 60 J

F = 15 N

s = ?

W = Fs

s = W / F

s = 60 / 15

s = 4 m

The resistance of ten kilometers of this aluminum wire is approximately 5.64 Ω.

The resistance of a wire can be calculated using the formula:

 R = \(\frac{\rho \times L}{A}\)

where R is the resistance, ρ is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area.

To calculate the resistance of ten kilometers (10,000 m) of the aluminum wire, we need to know the resistivity of aluminum. The resistivity of aluminum is typically around \(2.65 \times 10^{-8}\) Ω·m.

Given the cross-sectional area A as \(4.70 \times 10^{-4}\) \(m^{2}\) and the length L as 10,000 m, we can substitute these values into the resistance formula:

 R =   \(\frac{2.65 \times 10^{-8}\Omega.m \times 10,000 m }{4.70 \times 10^{-4} m^{2} }\)

Simplifying the expression, we find:

 R = 5.64 Ω

Therefore, the resistance of ten kilometers of this aluminum wire is approximately 5.64 Ω.

Learn more about resistance here: brainly.com/question/30712325

#SPJ11

Answer:

Sound is produced when an object vibrates, creating a pressure wave.

Explanation:

This pressure wave causes particles in the surrounding medium (air, water, or solid) to have vibrational motion. ... The human ear detects sound waves when vibrating air particles vibrate small parts within the ear.

Answer:

A sound wave is created by continuous vibration of an object. We hear sound when these waves created by vibrations reach our eardrum.

If my answer helped, kindly mark me as the brainliest!!

Thank You!!

Answer:

Explanation:

Position is the location of the object (whether it's a person, a ball, or a particle) at a given moment in time.

Displacement is the difference in the object's position from one time to another.

Distance is the total amount the object has traveled in a certain period of time.

I hope this helps!

The wheel of diameter 3cm will take 16.35s to unwind the cord of length 4m with constant angular acceleration of 4rad/s².

=ω\(_{i}\)t+ \(\frac{1}{2}\) αt²

But ⍵\(_{i}\) = 0

So, = \(\frac{1}{2}\) αt²  ----- (1)

= \(\frac{S}{r}\) ;

S= 4m   and r = \(\frac{3}{2}\)  = 1.5cm = 0.015m

= \(\frac{4}{0.015}\) = 267 rad

Using this value of in eq. (1)

267 = \(\frac{1}{2}\)  × 2 × t²

t²  = 267

t = \(\sqrt{267}\)

t = 16.35s

Constant angular acceleration is when an object's angular velocity changes by the same amount in every equal time interval.

Acceleration is the rate of change of haste with respect to time.

To learn more about acceleration, visit:

https://brainly.com/question/460763

#SPJ4

Malicious code examples include computer viruses, worms, Trojan horses, logic bombs, spyware, adware, and backdoor programmes that take advantage of common system flaws. Malicious programmes can enter a system through visiting infected websites or by clicking on a dubious email link or attachment.

Viruses, Trojan horses, worms, macros, and scripts are examples of malicious programming. Email attachments, downloading files, and accessing compromised websites may all transmit malicious malware.

Phishing emails are by far the most popular way for hackers and state-sponsored hacking groups to disseminate malware. Hackers have gotten quite good at creating emails that fool recipients into clicking links or downloading files with harmful software.

learn more about Malicious code refer

https://brainly.com/question/28314081

#SPJ4

That is acceleration due to the horizontal component of velocity is 0

When the body is on the projectile we tend to take components on the initial velocity for ease of calculation. The velocity is then divided into its components u sinФ and u cosФ where the horizontal component of the velocity of the projectile is shown by u cosФ while the vertical component of the velocity of the projectile is shown by u sinФ

To calculate the acceleration of either component of the velocity is very easy. In this case, we use the third equation of Newton's Equation of motion.

\(V^{2}\)-\(U^{2}\)=2as

When we calculate the acceleration of the horizontal component of velocity, we find that since the velocity remains the same at both the endpoint and the start no acceleration takes place.

\(U^{2}\)\(Sin^{2}\)Ф-\(U^{2}\)\(Sin^{2}\)Ф=2as

Thus, 2as=0

That is acceleration due to the horizontal component of velocity being 0

Learn more about projectile motion at:

brainly.com/question/29322509

The distance of the strike that accelerated from rest to a speed of 4 m/s is 0.301 m.

The speed of an object at a particular instance of time while its moving or covered some distance or just started moving.

The distance covered will  be 0.301m.

firstly we will new to calculate acceleration (a).

we can do so using newtons first law of motion.

v=u + a × t

where

a is the acceleration

t is the time

from here we get

a=(v-u)/t

a=(4-0)/0.15

a=26.67m/s²

using newtons second law of motion

s=u.t+1/2at²

where s is distance travelled in t seconds.

we get,

s=0.301m

Therefore according to newton's law of motion, the distance of the strike that accelerated from rest to a speed of 4 m/s is 0.301 m.

To learn more about newtons law of motion here: brainly.com/question/129361

#SPJ4

Answer:

Please find the answer in the explanation

Explanation:

What happens to a digital signal sent using electromagnetic waves as it travels farther from its source?

Solution.

To transmit a signal, the analogue signal is first modulated and converted to digital signals.

The digital signals transmitted through electromagnetic waves like radio wave or microwave can experience attenuation over a long distance as they tend to pass through tissues and wall.

The frequency and the intensity of wave continue to decrease as the wave tend to propagate through the wall and tissues.

To correct this, there must be a device to amplify the signal at the strategic points.

After this, the signal will be demodulated back to the analogue signal.

Therefore, attenuation may occur as the signal tend to pass through the tissues and office walls.

Answer:

The signal becomes weaker and more difficult to detect

Explanation:

got it right on my quiz

Answer:

Vf = 31 m/s

Explanation:

Have to use the Final Velocity Formula - Vf = Vi + a * t

Vf = Final Velocity

Vi = Initial Velocity

a = acceleration

t = time

* = multiply

Vf = 25 + 1.5 * 4

Vf = 25 + 6

Vf = 31 m/s

The final velocity of the car is 31 m/s.

Answer:

volume of a square : V=s3

Answer:

acceleration is zero m/s²

Explanation:

It is given that the train travels at constant speed (i.e speed does not change)

If speed does not change, then the train is neither accelerating or decelerating (i.e acceleration is zero)

The correct answer is a. 10 km/h.

b. The boat would move at 10 km/h at a 37-degree upstream angle to cross straight (into the current)

To be more precise, the rate of change in an object's position relative to a frame of reference and time is another way to describe velocity. It determines how quickly or slowly something is going. Consider a scenario in which there are two moving items. If both items are going in the same direction, it is simple to determine which one is moving faster than the other.

v = √v_x^2 +v_y^2

v = √((8 km/h)^2 + (6 km/h)^2)

=10 km/h

direction = θ = tan^-1 (opposite / adacrent)

= tan^-1 (6/8)

= tan^-1 (37)

= 37 degree down stream.

To learn more about velocities refer the link:

https://brainly.com/question/28390853

#SPJ9

The correct order of increasing impedance is:

C. PZT, gel, skin, matching layer

Impedance is a measure of the opposition to the flow of sound waves in a medium. It depends on the density and speed of sound in the material. In the given options, the order of increasing impedance can be determined by considering the properties of the materials involved.

PZT (lead zirconate titanate) has a higher impedance than gel, skin, and the matching layer. PZT is a piezoelectric material commonly used in ultrasound transducers and has a higher density and speed of sound, leading to higher impedance.

Gel has a lower impedance compared to PZT but higher impedance than skin and the matching layer. Gel is used as a coupling medium between the transducer and the skin to enhance acoustic coupling and minimize impedance mismatch.

Skin has a lower impedance than both gel and the matching layer. It is the outermost layer and acts as an interface between the transducer and the biological tissue.

The matching layer has the lowest impedance among the given options. It is designed to match the impedance of the PZT to the impedance of the tissue being imaged, facilitating efficient sound transmission.

Therefore, the correct order is C.

learn more about impedance Here:

https://brainly.com/question/30475674

#SPJ11

(i)Therefore, it takes approximately 9.27 hours to reach its full power output.(ii)It is necessary to have quick-start power sources, this helps maintain a stable and reliable electricity supply even when wind speeds fluctuate.(c)The Bremsstrahlung effect needs to be considered to ensure proper radiation protection.(d) The near-field region is characterized by strong electric and magnetic fields while the far-field region represents the radiation zone.

(i) To calculate the time it takes for the power station to reach its full power output, we can use the formula:

Energy = Power × Time

Given that the power station generates 6120 MWh of energy over a 10-hour period and the rated power at full capacity is 660 MW, we can rearrange the formula to solve for time:

Time = Energy ÷ Power

Converting the energy to watt-hours (Wh):

Energy = 6120 MWh × 1,000,000 Wh/MWh = 6,120,000,000 Wh

Converting the power to watt-hours (Wh):

Power = 660 MW × 1,000,000 Wh/MW = 660,000,000 Wh

Now we can calculate the time:

Time = 6,120,000,000 Wh ÷ 660,000,000 Wh ≈ 9.27 hours

Therefore, it takes approximately 9.27 hours (or 9 hours and 16 minutes) for the power station to reach its full power output.

(ii) The type of power station that can be started up fastest is a gas-fired power station. Gas-fired power stations can reach full power output relatively quickly because they use natural gas combustion to produce energy.

In contrast, other types of power stations, such as coal-fired or nuclear power stations, have longer start-up times. Coal-fired power stations require time to heat up the boiler and generate steam, while nuclear power stations need to go through a complex series of procedures to ensure safe and controlled nuclear reactions.

This is relevant to optimizing the usage of windfarms because wind power is intermittent and dependent on the availability of wind. This helps maintain a stable and reliable electricity supply even when wind speeds fluctuate.

(c) The Bremsstrahlung effect is a phenomenon that occurs when charged particles, such as electrons, are decelerated or deflected by the electric fields of atomic nuclei or other charged particles. As a result, they emit electromagnetic radiation in the form of X-rays or gamma rays.

In shielding design, the Bremsstrahlung effect needs to be considered to ensure proper radiation protection. These materials effectively absorb and attenuate the emitted X-rays and gamma rays, reducing the exposure of individuals to harmful radiation.

(d) The electromagnetic field output from an antenna can be represented by two main regions:

Near-field region: This region is closest to the antenna and is also known as the reactive near-field. It extends from the antenna's surface up to a distance typically equal to one wavelength. In the near-field region, the electromagnetic field is characterized by strong electric and magnetic field components.

Far-field region: Also known as the radiating or the Fraunhofer region, this region extends beyond the near-field region.The electric and magnetic fields are perpendicular to each other and to the direction of propagation.  The far-field region is further divided into the "Fresnel region," which is closer to the antenna and has some characteristics of the near field, and the "Fraunhofer region," which is farther away and exhibits the properties of the far-field.

The transition between the near-field and the far-field regions is gradual and depends on the antenna's size and operating frequency. The size of the antenna and the distance from it determine the boundary between these regions.

In summary, the near-field region is characterized by strong electric and magnetic fields, while the far-field region represents the radiation zone where the energy is radiated away as electromagnetic waves.

To know more about power station:

https://brainly.com/question/32772374

#SPJ4

Since the system's total momentum was zero before the cannon was fired, the momentum of the projectile and the cannon must be equal and opposing. The cannon will have a lower velocity since it has a lot greater mass.

Law of conservation of momentum states that total momentum of system remains conserved in the absence of external force.

As we know that know external no force is acting in the  on the system therefore momentum should be conserved according to the law of the conservation of momentum.

As we know that momentum is given by the formula

momentum = mass × velocity

initially momentum of the system is equal to zero because the velocity of the system is zero.

After fire ball move with high velocity means we have some momentum in the direction of the ball's motion but according to the law of the conservation there should be some momentum in the opposite direction which will cancel out the momentum of the ball therefore cannon will also move in opposite direction.

But as we know that momentum = mass × velocity

As the mass of the cannon is much higher than the mass of the ball therefore less velocity can generate the same amount of the momentum that is required to the cancel the momentum of the ball .

To know more about Momentum visit:

https://brainly.com/question/29471492

#SPJ4

Answer:

true

Explanation:

All atoms of an element have the same number of protons, and every element has a different number of protons in its atoms. ... Atoms are neutral in electrical charge because they have the same number of negative electrons as positive protons (Table 2.4.

Answer:

True

Explanation:

The number of protons in an atom is called its atomic number (Z). This number is very important because it is unique for atoms of a given element. All atoms of an element have the same number of protons, and every element has a different number of protons in its atoms.

The displacement of a car that travels 20 km west and then 5 km east is 5 km west. Displacement is a measure of the change in position of an object, and it is calculated by taking the final position of the object and subtracting its initial position. In this case, the car starts at an initial position and travels 20 km west, so its final position is 20 km west of its starting point. Then, the car travels 5 km east, which brings it back to its starting point. Therefore, the displacement of the car is 5 km west, as it has moved 5 km west of its starting point during its journey.

a) The bus is subject to a friction force (force of kinetic friction) of 4166.67 N.

b) The kinetic friction coefficient is 0.208.

a) Using the energy method, we can calculate the friction force (force of kinetic friction) by considering the change in kinetic energy of the bus as it comes to a stop.

The initial kinetic energy (KEi) of the bus is given by:

KEi = (1/2) * m * v²,

where m is the mass of the bus and v is its initial velocity.

Substituting the given values:

KEi = (1/2) * 2000 kg * (25 m/s)²

= 625,000 J.

The final kinetic energy (KEf) of the bus is zero since it comes to a stop. The work done by the friction force (Wfriction) is equal to the change in kinetic energy:

Wfriction = KEf - KEi

= 0 - 625,000 J

= -625,000 J.

Since the work done by friction is negative (opposite to the direction of motion), we can express it as the magnitude of the force multiplied by the distance over which it acts:

Wfriction = -Ffriction * d,

where Ffriction is the friction force and d is the stopping distance.

Substituting the given values:

-625,000 J = -Ffriction * 150 m.

Solving for Ffriction:

Ffriction = (-625,000 J) / (150 m)

= -4166.67 N.

Since the friction force should be positive (opposite to the direction of motion), we take the magnitude of the calculated value:

Friction force = |Ffriction|

= 4166.67 N.

Therefore, the friction force (force of kinetic friction) acting on the bus is approximately 4166.67 N.

b) The coefficient of kinetic friction (μk) can be calculated using the formula:

μk = Ffriction / (m * g),

where Ffriction is the friction force, m is the mass of the bus, and g is the acceleration due to gravity.

Substituting the given values:

μk = 4166.67 N / (2000 kg * 10 m/s²)

= 0.208.

Therefore, the coefficient of kinetic friction is approximately 0.208.

To know more about friction force click on below link :

https://brainly.ph/question/12460596#

#SPJ11

Answer:

A

Explanation:

3.5 Newton is the average force applied by the rocket engine to the rocket.

we have given data.

mass m = 0.5 kg

initial speed u = 0

final speed v = 70 m/s

time t = 10 sec

acceleration a = v-u/t

a = 70-0/10 = 7 m/s^2

from the relation

f = ma

f = 0.5×7 = 3.5 N

The direction of the applied force determines the change in a body's linear momentum, which changes at a rate that is directly proportional to the force.

The SI unit of force is the Newton. It is described as the force that propels a mass of 1 kilogram at an acceleration of 1 meter per second squared. Its sign is the capital letter N, which is represented as 1N=1 kg m s^2. 1N=1 kilogram m s^−2.

To know more about  force visit : https://brainly.com/question/13191643

#SPJ4

The mass of the refrigerator can be calculated using Newton's second law of motion. Given that a force of 20 N causes the refrigerator to accelerate at 2 m/s², the mass of the refrigerator is 10 kg.

Newton's second law of motion states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. Mathematically, it can be represented as F = m * a, where F is the force, m is the mass, and a is the acceleration.

In this scenario, a force of 20 N is applied to the refrigerator, resulting in an acceleration of 2 m/s². We can rearrange the formula to solve for mass, which gives us m = F / a. Plugging in the values, we have m = 20 N / 2 m/s², which simplifies to m = 10 kg. Therefore, the mass of the refrigerator is 10 kg.

Learn more about Law of motion here ; brainly.com/question/29775827

#SPJ11

Answer:

It demonstrates that the narrator is surrounded by nature.

Explanation:

Walt Whitman's "Crossing the Brooklyn Ferry" is a free verse poem written about the speaker's return trip on a ferry. He talks about his daily commute on the Brooklyn ferry, like the other commuters, and how they all share the same experience.

The given lines are from the very first stanza of the poem. The speaker repeats "face-to-face" when talking about nature. He sees the "flood-tide below" and the "clouds" high in the sky. This repetition demonstrates that he is surrounded by nature, amidst the throng of people around him. This shows the speaker's attitude of seeing the beauty of nature in any way he can, despite the bustle of commuting from Brooklyn to Manhattan.

Thus, the correct answer is the second option.

Answer:

B

Explanation:

edge 2023

Short-term effects of volleyball training: Improved agility: Regular volleyball training enhances footwork, reaction time, and coordination, allowing players to move quickly and efficiently on the court.

Enhanced power and explosiveness: Volleyball training focuses on building strength, power, and explosiveness through exercises such as plyometrics and resistance training, enabling players to generate greater force during jumps and hits.

Increased skill proficiency: Consistent training drills and practice sessions refine technical skills like serving, passing, setting, and spiking, resulting in improved accuracy, control, and overall performance.

Long-term effects of volleyball training:

Enhanced physical fitness: Continuous training over time improves cardiovascular endurance, muscular strength, and flexibility, contributing to better overall fitness and stamina on the court.

Reduced injury risk: Regular training helps strengthen muscles, tendons, and ligaments, enhancing joint stability and reducing the likelihood of volleyball-related injuries such as sprains, strains, and tears.

Improved game intelligence: Extensive training and experience develop a deep understanding of volleyball strategies, tactics, and game dynamics, leading to better decision-making, anticipation, and positioning, resulting in a competitive edge during matches.

learn more about reaction  here:

https://brainly.com/question/30201227

#SPJ11

Explanation:

\(p1 \times v1 = p2 \times v2 \)

\(p1 = initial \: pressure \\ v1 = initial \: volume \\ p2 = final \: pressure \\ v2 = final \: volume\)

You're looking for p2. So, divide both sides by v2...

\( \frac{p1 \times v1}{v2} = p2\)

volume of a cylinder is

\(h \times \pi \: \times {r}^{2} \)

let's assume r = 1

\( \frac{p1 \times (20cm \times \pi)}{(60cm \times \pi)} = p2\)

the Pi's cancel out, the 20/60 can be reduced to 1/3.

So you end up with

\(p1 \times \frac{1}{3} = p2\)

or as the book shows....

\( \frac{1}{3} p\)

The velocity of the football thrown is approximately 23.76 meters per second.

Momentum is simply the product of the mass of an object and its velocity.

This is expressed as;

P = m × v

Where m is the mass of the object and v is its velocity.

Given that;

Plug the given values into the above formula and solve for v.

P = m × v

v = P / m

v = 10.1kgm/s / 0.425kg

v = 23.76 m/s

Therefore, the velocity of the ball is 23.76 m/s.

Learn more about momentum: brainly.com/question/14952164

#SPJ1

Explanation:

mass = newton ÷ g

m = 1025 ÷ 10

mass= 102.5kg

The common housefly has 12 chromosomes, which means that each parent contributes 6 chromosomes to their offspring.

When these chromosomes combine during fertilization, there are a variety of possible combinations that can form. The exact number of different chromosome combinations that can form in the offspring depends on the specific genetic makeup of each parent. However, one can calculate the number of possible combinations using a mathematical formula known as the binomial coefficient.

In this case, the formula would be (2n)! / (n! * (2n - n)!), where n represents the number of chromosomes contributed by each parent. Plugging in n=6, we get a total of 924 possible chromosome combinations that can form in the offspring of two common houseflies.

More on chromosomes: https://brainly.com/question/30077641

#SPJ11