pls help me with this​

The net force on the airplane window of area 1800 cm² is 3469.47 Pa.m² .

Given:

Pressure inside the cabin: 0.95 atm

Pressure outside the cabin: 0.76 atm

Area of the airplane window: 1800 cm²

Now to find the net force on the airplane window, we can calculate the pressure difference between the inside and outside of the cabin and to calculate the pressure difference, we subtract the outside pressure from the inside pressure.

Pressure Difference = Pressure inside - Pressure outside

Pressure Difference = 0.95 atm - 0.76 atm

Pressure Difference = 0.19 atm

The area of the airplane window is given as 1800 cm². To simplify calculations in SI unit we convert the area to square meters:

Area in m² = (Area in cm²) / 10,000

Area in m² = 1800 cm² / 10,000

Area in m² = 0.18 m²

As we know,

Net Force = Pressure Difference * Area

Net Force = 0.19 atm * 0.18 m²

Net Force = 0.0342 atm·m²

To convert the net force to pascals (Pa), we use 1 atm = 101325 Pa. Multiplying the net force by 101325 Pa, we get

Net Force = 3469.47 Pa·m²

Therefore, the net force on the airplane window is approximately 3469.47 pascals times square meters (Pa.m²).

To learn more about net force,

The magnitude of the tension in the string marked A is 39.5 N.

The tension in A is determined thus:

The angle at A, θ = tan⁻¹(3/8) = 20.56

When extrapolated below negative x, the angle at B, α = tan⁻¹(5/4) = 51.34

When extrapolated below negative x, the angle at C, β = tan⁻¹(1/6) = 9.46

Taking the horizontal components of tension;

56.3cos(9.46) = A * cos(20.56) + B * cos(51.34)

0.6247B= 55.53 - 0.936A

B = (55.53 - 0.936A)/0.6247 ----(1)

Taking the vertical components of tension;

56.3 * sin(9.46) + A * sin(20.6) = B * sin(51.3)

9.25 + 0.35A = 0.78B  ---- (2)

substitute the value (1)  in (2)

9.25 + 0.35A = 0.78{(55.53 - 0.936A)/0.6247}

(9.25 + 0.35A) * 0.6247 = 43.31 - 0.73A

0.22A + 0.73A = 43.31 - 5.78

0.93A = 37.53

A = 39.5 N

In conclusion, the tension in A is determined by solving for the vertical and horizontal components of tension.

Learn more about tension force at: https://brainly.com/question/24994188

#SPJ1

Explanation:

spring constant k::8.5

and displacement x::1.2

f:? f: k×x

8.5×1.2:10.2N

The principal focus of a concave mirror is a point on the axis of the mirror at which parallel rays of light are brought to focus after being reflected by the mirror. A concave mirror is a mirror with a curved surface that is shaped like the inside of a bowl, with the center of the curve facing outward. When light rays are reflected by a concave mirror, they are brought to a focus at the principal focus of the mirror. The distance from the center of the mirror to the principal focus is known as the focal length of the mirror. The principal focus of a concave mirror is an important concept in optics and is used in the design and operation of various optical instruments, such as telescopes and cameras.

Answer:

Explanation:

Two factors determine the magnitude of the gravitational force between two objects: (1) their masses and (2) the separation distance between them. The size of the force is proportional to the product of the masses of the two objects.

Answer:

Products of their masses and distance between them will affect.

Distance affects the most and mass of the objects

Explanation:

Hope this helps <3

~lil pickle

less competition for pollinators with other species  

 Explanation: just took this test and got a 100

Answer:

less competition with other species

Explanation:

just took the test

Answer:

A. The fugacity in the vapor phase at T = 323 K and P = 10 kPa:

Explanation:

The question is missing some parts. Here is the complete question.

A suspension bridge cable is connected to its anchor at a 20° angle. Find the vertical and horizontal component of the force on the anchor by the cable.

Answer: \(F_{x}=\) 14095.4 N

              \(F_{y}=\) 5130.3 N

Explanation: The force applied to the anchor is not perpendicular to the horizontal plane. So, it can be decomposed into 2 components: a vertical component, which is on the y-axis, and a horizontal component, which is on the x-axis.

The force and its components forms a right triangle, so we can calculate the components by using trigonometric relations:

Horizontal

\(cos(20)=\frac{F_{x}}{F}\)

\(F_{x}=F.cos(20)\)

\(F_{x}=15,000(0.9397)\)

\(F_{x}=\) 14,095.4 N

Vertical

\(sin(20)=\frac{F_{y}}{F}\)

\(F_{y}=Fsin(20)\)

\(F_{y}=\) 15,000(0.3420)

\(F_{y}=\) 5,130.3 N

The vertical and horizontal components of force on the anchor by the cable are 5130.3 N and 14095.4 N, respectively.

Answer:

please mark me as brainliest I'm begging u

Explanation:

The behavior of an object that has been charged is dependent upon whether the object is made of a conductive or a nonconductive material. Conductors are materials that permit electrons to flow freely from particle to particle. An object made of a conducting material will permit charge to be transferred across the entire surface of the object. If charge is transferred to the object at a given location, that charge is quickly distributed across the entire surface of the object. The distribution of charge is the result of electron movement. Since conductors allow for electrons to be transported from particle to particle, a charged object will always distribute its charge until the overall repulsive forces between excess electrons is minimized. If a charged conductor is touched to another object, the conductor can even transfer its charge to that object. The transfer of charge between objects occurs more readily if the second object is made of a conducting material. Conductors allow for charge transfer through the free movement of electrons

Answer:

22%

Explanation:

Given parameters:

The amount of change  = $0.22

Unknown

What percentage of a dollar the change represents  = ?

Solution:

A dollar is made up of 100cents;

        So;

 $0.22 represents 22cents

Percentage of dollar this represents  = \(\frac{22}{100}\)  x 100  = 22%

Answer:

10.77 m

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 32 m/s

Angle of projection (θ) = 27°

Acceleration due to gravity (g) = 9.8 m/s²

Apogee i.e maximum height (H) =?

Thus, the apogee i.e the maximum height of the pumpkin can be obtained as follow:

H = u² Sine² θ /2g

H = 32² × (Sine 27)² / 2 × 9.8

H = 1024 × (0.454)² / 19.6

H = (1024 × 0.206116) / 19.6

H = 10.77 m

Thus, the apogee i.e the maximum height of the pumpkin is 10.77 m.

Answer:

acceleration

Explanation:

speed=v,

In speed vs time graph, slope = dv/dt = acceleration

Answer:

I think its 71.4 if u get it wrong u can slap me

The distance in Km he has fallen to break the sound barrier is 6 Km

To obtain the answer to the question, we'll beging by calculating the time taken to break the sound barrier. This can be obtained as follow:

v = u + gt

343 = 0 + (9.8 × t)

343 = 0 + 9.8t

343 = 9.8t

Divide both sides by 9.8

t = 343 / 9.8

t = 35 s

Finally, we can obtain the height as follow:

h = ½gt²

h = ½ × 9.8 × 35²

h = 4.9 × 1225

h = 6002.5

Divide by 1000 to express in Km

h = 6002.5 / 1000

h = 6 Km

Thus, Félix baumgartner broke the sound barrier when he had fallen 6 Km

Learn more about motion under gravity:

https://brainly.com/question/22719691

#SPJ1

Answer:

Explanation:

We need the power equation here:

P = W/t where W is work and is defined as

W = F*displacement.

Force is a measure in Newtons, which is also weight. We have the mass of the piano, but we need to find the weight:

w = mg so

w = 166(9.8) so

w = 1600N, rounded to the correct number of sig dig. We use that now in the power equation:

\(4560=\frac{(1600)(15)}{t}\) and isolating the unknown:

\(t=\frac{(1600)(15)}{4560}\) so

t = 5.3 seconds

Answer:

During thermionic emission, electrons are emitted from metal surfaces by providing heat energy, while during photoelectric emission, light energy is emitted when electrons are emitted from the surface of metal

Hope it helps :)

The equivalent temperature in Celsius scale is (86°F − 32) × 5/9 = 30°C

Take the °F temperature and subtract 32

Multiply this number by 5.

Divide this number by 9 to obtain your answer in °C.

The formula to convert °F to °C is:

T(°C) = (T(°F) - 32) × 5/9

converting 86 degrees Fahrenheit into degrees Celsius:

T(°C) = (86°F - 32) × 5/9

T(°C) = 30 °C

(86°F − 32) × 5/9 = 30°C

When doing the temperature conversion, one quick way to make certain you did the conversion right is to remember Fahrenheit temperatures are higher than the corresponding Celsius scale until you get down to -40°, which is where the Celsius and Fahrenheit scales meet. Below this temperature, degrees Fahrenheit are lower than degrees Celsius.

To know more about temperature conversions;

https://brainly.com/question/625001?referrer=searchResults

Answer: At that moment, all the baseball's kinetic energy has been converted to potential energy.

Explanation: I took the test

Answer:

Liter

Explanation:

Answer:

D

Explanation:

A Newton-meter is the same thing as a Joule.

Answer:

c

Explanation:

feel kolang na yan yung answer HAHAHAHA

Answer:

Once at a steady cruising speed of about 16,150mph (26,000kph

Explanation:

The acceleration of the car is determined as 0.35 m/s².

The acceleration of the car is calculated by applying the formula for Newton's second law of motion as follows;

F(net) = ma

where;

Fy = F sinθ

200 = F x sin(30)

F = 200 / sin(30)

F = 400 N

The tension in horizontal direction;

Fₓ = 400 N x cos(30)

Fₓ = 346.4 N

The acceleration of the car is calculated as;

a = Fₓ / m

a = 346.4 / 1000

a = 0.35 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

We will have the following:

a. The gravitational potential energy will be:

So, the gravitational potential energy of C is 882 J.

b. The velocity of C right before it hits the ground will be:

So, the velocity will be approximately 10.84 m/s.

c.

1. We will have that Eg at the initial position will be: B < C

2. Vfinal upon impact with ground: B = C

3. Ek right before hitting he ground: B < C

f.

1. Eg: A > B

2. V final: A > B

3. Ek: A > B

4. V at 2 meters above the ground: A > B

5. Total energy at 2 m above the ground: A > B.

The magnitude of the electric flux through the sheet is 4.05 N m² C⁻¹ (Option E).

The electric flux through a surface is given by the product of the electric field strength and the area of the surface projected perpendicular to the electric field.

In this case, the electric field strength is 18 N C⁻¹, and the area of the sheet projected perpendicular to the electric field is 0.450 m²

(since the normal to the sheet makes an angle of 60° with the electric field). Multiplying these values gives the electric flux:

Electric flux = Electric field strength × Area

Electric flux = 18 N C⁻¹ × 0.450 m²

Electric flux = 8.1 N m² C⁻¹

In summary, the magnitude of the electric flux through the sheet is 4.05 N m² C⁻¹. This value is obtained by multiplying the given electric field strength by the projected area of the sheet perpendicular to the electric field.

The angle of 60° is taken into account to determine the effective area for calculating the flux.(Option E).

for such more questions on electric

https://brainly.com/question/1100341

#SPJ8

The change in the tension if the radii r changes from 4.0 cm to 4.1 cm, and R changed from 0.8 cm to 0.9 cm is negative, therefore, tension reduces.

Mass of the yoyo = 0.001 kg

Initial value of the spindle radius, R = 4 cm

Initial length of the radius of the yo–yo, r = 0.8 cm

The final values are;

R2 = 4.1 cm, r2 = 0.9 cm

Which gives;

\(T_{r \:R} = \frac{0.001 \cdot g \cdot R }{2 \cdot r^{2} + R^2} \)

Which gives;

\(T_{{r _1 \:R _1 }} = \frac{0.001 \times 9.8 \times 0.04 }{2 \times 0.008^{2} + 0.04²} = \frac{49}{216} \)

\(T_{{r _2 \:R _2 }} = \frac{0.001 \times 9.8 \times 0.041 }{2 \times 0.009^{2} + 0.041^2} = frac{2009}{9215} \)

Therefore;

\( \Delta T_{{r \:R }} = frac{2009}{9215} - \frac{49}{216} = - \frac{17591}{1990440} \)

Given that difference between the final and the initial states is negative, the the value of the tension decreases

Learn more about working with functions here:

https://brainly.com/question/17043948

#SPJ1

To convert this computed volume from mL to L, simply divide the provided quantity of ethanol by its density: 500g(mL0.789g)(L1000mL)=0.633L. 500g(mL0.789g)(L1000mL) = 0.633L.

Ingestion, inhalation, and skin absorption of ethanol are all dangerous. Frequent contact can cause the skin to become dry, which can cause it to become itchy, crack, and peel. The central nervous system, the eyes, and the upper respiratory tract can all be affected by ethanol.

The term "alcohol" refers to a wide variety of compounds that are created when one atom of carbon interacts with oxygen, hydrogen, and other atoms. Yet, all alcohol in alcoholic beverages is a particular little molecule known as ethanol.

To know more about Ethanol visit:

https://brainly.com/question/25002448

#SPJ1